ZYXEL NWA220AX-6E 802.11ax Dual-Radio PoE Access Point User Guide
- June 5, 2024
- ZYXEL
Table of Contents
ZYXEL NWA220AX-6E 802.11ax Dual-Radio PoE Access Point
Hardware Installation
Connect the UPLINK port to a router with Internet access. If you are not using PoE, connect the Zyxel Device power socket to an appropriate power source.
Option 1 A Nebula Registration with the App
Use the Zyxel Nebula Mobile app to register the Zyxel Device to the NCC using the QR code.
Where to find QR code:
Web Configurator or Label on the device
Download and open the Zyxel Nebula Mobile app. Log in with your myZyxel
account. reate an organization and site or select an existing site. Scan the
Zyxel Device’s QR code to add it to the site. (You can find the QR code in its
web configurator or on a label on the device or its box.)
Note: The Zyxel Device will go into cloud management mode automaticallv
after it is reaisterad to.a site
Option 1B B Nebula Registration with the Web
Use the Zyxel Nebula portal to register the Zyxel Device to the NCOb using the
MAC address and serial number.
Follow the steps below to manage the Zyxel Device through the Zyxel cloud-
based network management system.
Note: Make sure the connected router has Internet access OGo to the Zyxel
Nebula Control Center (NCC) website
(https://nebula.zyxel.com). Click Get
Started to sign up for a myZyxel account and log in.
Create an organization and a site (network) in the NCC. Enter the Zyxel
Device’s LAN MAC address and serial number (S/N) (see the label on the device)
in the NCC configuration screen.
Note: The Zyxel Device will go into cloud management mode automatically
after it is registered to a site. See the NCC User’s Guide for more
information about configuring the Zyxel Device through the NCC.
Option 2 Direct Management
Use the web configurator to directly manage the Zyxel Device.
1-a WiFi connection
http:/n.1.1.1 or setup.zxyel.com
(First time configuration only) User
Name: admin Login Password: 1234 (default)From a WiFi enabled computer, search
for the Zyxel Device’s default WiFi network name (Zyxel-xxxx, where XXXX is
the last four characters of the MAC address) and connect to it. Open your web
browser and enter “http://11.1.1
(setup.zyxel.com)” for initial
configuration. Enter the default user name (admin) and password (1234). Click
Login.
Note: If the Zyxel Device cannot connect to the Internet, use the DHCP-
assigned IP address of the Zyxel Device to access its web configurator. Check
the connected router or DHCP server for the IP address of the 7vxel Device Use
an Ethernet cable to connect your computer to the UPLINK port of the Zyxel
Device through a PoE injector or PoE switch. Use its DHCP-assigned IP or
default static IP address “http://192.168.1.2”
to access the web configurator. Make sure your computer IP address is in the
same subnet as the ZvxelDevice’s
Use an Ethernet cable to connect your computer to the UPLINK port of the Zyxel
Device through a PoE injector or PoE switch. Use its DHCP-assigned IP or
default static IP address
“http://192.168.1.2” to access the web
configurator. Make sure your computer IP address is in the same subnet as the
ZvxelDevice’s
The wizard appears automatically. Use the wizard to set your Zyxel Device.
Note: It takes 1 to 2 minutes to apply your wizard changes. The LED turns
steady blue if you change the Zyxel Device default settings and the WIFi is
on. Use the Zyxel Device’s new wireless settings (SSID and key) to re-connect
to the Zyxel Device’s WiFi network for Internet access if you change them in
the wizard (or log in to the web configurator when the Zyxel Device is using a
WiFi connection). The LED turns steady green when WiFi clients connect to the
Zyxel Device.
Note: The(setup.zyxelcom) is for initial setup only. It is not usable after
the Zyxel Device is configured.
Note: Check the Dashboard screen and note down the Zyxel Device’s IP
address in case you need to access its AIOb confcurc ain.
Wall/Ceiling Mounting
The mounting kit is for wall or ceiling mounting. You need to choose how you want to mount your Zyxel Device first.Wall mounting: Drill two holes for the screw anchors (A), 62.4 mm apart. Insert the screw anchors into the wall. Ceiling mounting: Drill two holes for the screw anchors (A), 62.4 mm or 7O.1 mm apart. Insert the screw anchors
Install two mounting screws through the holes on the bracket (B) into the plugs/anchors to secure the bracket to the wall/ceiling. Make sure the screws are snugly and securely fastened to the wall/ceiling. After the bracket is attached to the wall/ceiling, slide the Zyxel Device onto the bracket until it clicks into place.
T-bar Ceiling Mounting
Clips (AcCESSORY-ZZ0105F) are sold separately.Attach two clips to the ceiling
grids as shown. Install two screws to secure the bracket to the clips. Slide
the Zyxel Device onto the bracket until it clicks into the place.
Note: Clips (ACCESSORY-ZZ0105F) are sold separately.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>