HYUNDAI WSC 2180 Digital Weather Station Instruction Manual

June 5, 2024
HYUNDAI

HYUNDAI WSC 2180 Digital Weather Station-LOGO

HYUNDAI WSC 2180 Digital Weather Station

HYUNDAI WSC 2180 Digital Weather Station-PROD

Features

Weather Forecast

  • Sunny, Slightly Cloudy, Cloudy, Rainy and Snow animation

time

  • Radio-controlled time with Manual Time setting option
  • Dual Time setting
  • 12/24 hour user selectable
  • Daily Snooze Alarm function
  • Perpetual Calendar Up to Year 2099
  • Day of week in 8 languages user selectable

humidity

  • Measurable range: 20 ~ 99 %
  • Max/Min Memory

temperature

  • Indoor measurable range: 0 ~ 50 °C [+32 ~ +122 °F]
  • Measures °C/°F user selectable
  • Outdoor measurable range: -20 ~ 50 °C [-4 ~+ 122 °F]
  • Max/Min Memory [indoor & outdoor]
  • Comfort Indicator Bar

Wireless outdoor sensor

  • Low-battery indicator for Outdoor Thermo Sensor
  • Wall Mount or Table Stand
  • One Wireless Thermo Sensor Included
  • 433 MHz RF transmitting frequency
  • 30 meter [98 feet] transmission range in an open area

MAIN UNIT APPEARANCE

HYUNDAI WSC 2180 Digital Weather Station-
FIG1

Part a – LCD

  1. Outdoor Temperature Channel
  2. Outdoor Temperature Trend
  3. Outdoor Temperature
  4. Indoor Temperature
  5. Indoor Humidity
  6. Comfort Indicator Bar
  7. Radio Controlled Time
  8. Air Pressure Trend
  9. Weather Forecast
  10. Date
  11. Moon Phase

Part B – Buttons

  1. “SNOOZE/LIGHT” button
  2. “MAX/MIN” button
  3. 12/24” button
  4. “MODE” button
  5. button
  6. “AL ON/OFF” button
  7. “RESET” button
  8. “WEATHER” button
  9. “CHANNEL” button

Part C – structure

  1. Wall Mount Hole
  2. Battery Cover
  3. Stand

outdoor thermo sensor

HYUNDAI WSC 2180 Digital Weather Station-
FIG2

  1. Transmission Indication LED
  2. Outdoor Temperature
  3. Battery Compartment
  4. Wall Mount Hole
  5. “RESET” button
  6. Channel Select Switch
  7. Temperature Probe Plug & Jack
  8. Stand

getting started

main unit:

  • Slide open main unit battery compartment cover [C2]
  • Insert 2 x AA batteries observing polarity [ “+” and “–” marks]
  • Replace main unit battery compartment cover [C2]
  • Use a pin to press the RESET [B7] button on the rear of the main unit, the main unit is now ready for use

outdoor thermo sensor

  • The batteries compartment (D3) of the sensor is located behind the back cover, unscrews the batteries cover to open.
  • Insert 2 x AAA batteries observing polarity [ “+” and “–” marks]

installation

main unit
The main unit can be placed onto any flat surface (C3), or wall-mounted by the hanging hole (C1) at the back of the unit.
outdoor thermal sensor
The remote sensor should be securely mounted onto a horizontal surface.
note: Transmissions between receiver and transmitter can reach up to 30 m in open area. Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc.

Weather ForeCast FunCtion

operation

  • After the Batteries inserted OR holding the “WEATHER” button (B8) for 3 seconds, weather icon flashes (A9) on the LCD. Enter the current weather by pressing “▲” (B3) or “▼” (B5) button. Press the “WEATHER” (B2) button to confirm the setting. The weather forecast may not be accurate if the current weather entered is not correct.
  • The current weather status should be entered again if the altitude of the Main Unit is changed.(Barometric pressure is lower at a higher altitude location. Therefore, altitude change will affect the weather forecast). The weather station will start the first forecast at 6 hours later after the current weather status is entered.

Weather Conditions
There are totally 5 different weather status animations in the weather forecast.HYUNDAI WSC 2180 Digital Weather Station-FIG3

note: “Freezing or snow“ is shown if the weather forecast is Rainy and outdoor temperature (any channel) is under 0°C.

  • Frost Alert: “ ” is shown if the outdoor temperature (any channel) is between -2°C ~ +3 °C
  • If there is any inconsistency of the weather forecast between Local Weather Station and this unit, the Local Weather Station‘s forecast should prevail. The manufacture will not hold responsible for any trouble that may come up due to wrong forecasting from this unit.

Barometric trend Pointer (a8)
The trend pointer displayed on the LCD (A8) indicates the trend of the Barometric pressure.HYUNDAI WSC 2180 Digital Weather Station-
FIG5

thermometer

RF transmission Procedure:

  • The main unit automatically starts receiving a transmission from the outdoor Thermo sensor for outdoor temperature after the weather condition setting.
  • The Thermo sensor unit will automatically transmit the temperature signal to the main unit after batteries are inserted.
  • For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2 or CH3 to ensure each sensor is transmitting a different channel before inserting batteries. The channel select switch (D6) is at the back of the thermal sensor.
  • If the main unit failed to receive a transmission from outdoor Thermo sensor in first 3 minutes after the batteries are inserted (“- – . –” display on the LCD), hold the “CHANNEL” button (B9) for 3 seconds to receive transmission manually. RF icon “ ” flashes on the LCD

note: Buttons (except “Channel” & “Light” buttons) will not function while scanning for thermo sensor’s signal unless they are well received or stopped manually.

temperature & humidity
outdoor temperature — Channel selection

  • Press the “CHANNEL” button (B9) to view the 3 Channel’s temperature. The sequence is shown as follows:
    • PRESS “CHANNEL” button PRESS “CHANNEL” button PRESS “CHANNEL” button HYUNDAI WSC 2180 Digital Weather Station-FIG6
  • When viewing the record on CHANNEL 1 or 2, or 3, hold “CHANNEL” button (B9) for 3 seconds to cancel the record on this channel manually, and receive the transmission from channels automatically again.

outdoor temperature trend

  • The trend pointer (A2) displayed on the LCD indicates the trend of the outdoor temperature.HYUNDAI WSC 2180 Digital Weather Station-FIG7

Celsius / Fahrenheit

  • Press “°C/°F” button (B5) to select Indoor/Outdoor Temperature in Celsius mode or Fahrenheit mode.
  • If the temperature is out of the measurable range, LL.L (beyond the minimum temperature) or HH.H (beyond the maximum temperature) will be shown on the LCD.

maximum / minimum temperature & indoor humidity recording Function: 

  • Press the “MAX/MIN” button (B2) to show the maximum recorded Indoor/Outdoor Temperature and Indoor Humidity. “ maX ” is shown on the LCD
  • Press the “MAX/MIN” button (B2) again to show the minimum recorded Indoor/Outdoor Temperature and Indoor Humidity. “ min ” is shown on the LCD.
  • Hold the “MAX/MIN” button (B2) for 3 seconds to clear the recorded maximum and minimum reading.

Comfort indicator Bar

  • (A6) for the display of pleasant/unpleasant climate.

the use of 1.5m cord temperature Probe:

  • Insert the probe plug (D6) to the jack on the right-hand side of the Thermo Sensor Unit.
  • Put the metal casing outside and leave the Thermo Sensor Unit in an indoor area to avoid freezing up the battery when the outdoor temperature is below -20 °C.
  • Always use the temperature probe to sense the temperature when the temperature is between the following range: -50 °C ~ 0°C and +50 °C ~ + 70 °C

time and alarm setting

radio Controlled Clock:

  • After batteries inserted and main unit finishes receiving the transmissions from the outdoor thermo sensor, the clock automatically starts to scan the DCF time signal. Radio Control Icon “ ” flashes on the LCD.HYUNDAI WSC 2180 Digital Weather Station-FIG8
  • The clock automatically scans the time signal at 3.00 a.m. every day to maintain accurate tim-ing. If reception fail, scanning stops (“ ” on LCD disappear) and repeats again at 4.00 a.m. 5.00 a.m. and 6.00 a.m.
  • The clock can be set to scan the time signal manually by holding “ ” button (B5) for 3 seconds. Each reception takes about 5 minutes. If receptions fail, scanning stops. (“ ” on LCD disappear) and repeats again on the next full hour. E.g. scanning failed at 8.20 a.m. It will scan again at 9.00 a.m.
  • Stop scanning by holding “ ” button (B5) for 3 seconds.
  • “DST” is shown on the LCD if it is in Daylight Saving Time Mode

note: Buttons (except the “LIGHT” button (B1)) will not function while scanning for DCF time signal unless they are well received or stopped manually.

manual time setting:

  • Hold the “MODE” button (B4) for 3 seconds to enter Clock/Calendar setting mode.
  • Press the “▲” (B3) or “▼” (B5) button to adjust the setting and press the “MODE” button (B4) to confirm each setting.
  • The setting sequence is shown as follow: Hour, Minute, Second, Year, Month, Day, Time Zone, and Day-of-week language.
  • 8 languages can be selected in Day-of-week, they are: German, French, Spanish, Italian, Dutch, Denmark, Russian, and English.
  • The languages and their selected abbreviations for each day of the week are shown in the following table.
    language| sunday| monday| tuesday| Wednesday| thursday| Friday| saturday
    ---|---|---|---|---|---|---|---
    German, GE| SO| MO| DI| MI| DO| FR| SA
    English, EN| SU| MO| TU| WE| TH| FR| SA
    Russian, RU| BC| NH| BT| CP| HT| NT| CY
    Denmark, DA| SO| MA| TI| ON| TO| FR| LO
    Dutch, NE| ZO| MA| DI| WO| DO| VR| ZA
    Italian, IT| DO| LU| MA| ME| GI| VE| SA
    Spanish, ES| DO| LU| MA| MI| JU| VI| SA
    French, FR| DI| LU| MA| ME| JE| VE| SA
  • The Time zone is used for the countries that can receive the DCF time signal but the time zone is different from German time.
  • When the country time is faster than the German time for 1 hour, the zone should be set to + 1. Then the clock will automatically set 1 hour faster from the signal time received.

note:

  1. Second, adjusted to zero only.
  2. The Time Setting Mode will automatically exit in 15 seconds without any adjustment.

12/24 hour display mode:
Press “(12/24)” button (B3) to select 12 or 24 hours mode.
daily snooze alarm Function:

  • Press the “MODE” button (B4) to select to view: HYUNDAI WSC 2180 Digital Weather Station-FIG9
  • When viewing the Alarm Time, hold the “MODE” button (B4) for 3 seconds to enter the Alarm Time setting. Press “▲” (B3) or “▼” (B5) button to adjust the alarm time. Press “MODE” button (B4) to confirm the setting.
  • Press the “AL ON/OFF” button (B6) to switch alarm on or off. If it is on, “
  • When Alarming, press the “SNOOZE/LIGHT” button (B1) to activate the snooze alarm, (“ flash on the LCD). The alarm will snooze for 5 minutes, then it alarms again. This snooze function can be enabled for maximum of 7 times.

dual time setting Function

  • Press the “MODE” button (B4) to select to view : HYUNDAI WSC 2180 Digital Weather Station-FIG10
  • When viewing the Dual Time, hold the “MODE” button (B4) for 3 seconds to enter Dual Time setting. “Hour” & “Min” digits flash. Press “▲” (B3) or “▼” (B5) button to adjust the “hour”, press the “MODE” button (B4) to confirm and quit the setting.

moon Phase disPlay

The Moon Phase (A11) of each day is shown on the LCD.HYUNDAI WSC 2180
Digital Weather Station-FIG11

  • New Moon
  • Waxing Crescent
  • First Quarter
  • Waxing Gibbous
  • Full Moon
  • Waning Gibbous
  • Last Quarter
  • Waning Crescent

loW Battery indiCation:

The low battery icon will appear at a particular channel indicating that thermo sensor unit of the channel is in low battery status. The batteries should be replaced.

BaCklight

Press the “SNOOZE/LIGHT” button (B1), backlight states for 5 seconds.,

PreCautions

  • Use a pin to press the reset button (B7) if the Unit does not work properly.
  • All Setting Modes will automatically exit in 15 seconds without any adjustment.
  • The clock loses its time information when the battery is removed.
  • Avoid placing the clock near interference sources/metal frames such as computers or TV sets.
  • Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
  • The outdoor sensor must not be set up and installed underwater. Set it up in away from direct sunlight and Rain
  • Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning agents may scratch plastic parts and corrode electronic circuits
  • If there is any inconsistency of weather forecast between Local Weather Station and this unit, the Local Weather Station‘s forecast should prevail. The manufacturer will not take responsible for incorrect forecasting from this unit

SPECIFICATION

We reserve the right to change technical specifications.

Warning: Do not use this product near water, in wet areas to avoid fire or injury of electric current. Always turn off the product when you don’t use it or before a revision. There aren’t any parts in this appliance that are reparable by consumers. Always appeal to a qualified authorized service. The product is under dangerous tension.

old electrical appliances, used batteries and accumulators disposal

This symbol appears on the product, on the product accessories or on the product packing means that the product must not be disposed of as household waste. When the product/ battery durability is over, please, deliver the product or battery (if it is enclosed) to the respective collection point, where the electrical appliances or batteries will be recycled. The places, where the used electrical appliances are collected, exist in the European Union and in other European countries as well. By proper disposal of the product, you can prevent possible negative impacts on the environment and human health, which might otherwise occur as a consequence of improper manipulation with the product or battery/ accumulator. Recycling of materials contributes to the protection of natural resources. Therefore, please, do not throw the old electrical appliances and batteries/ accumulators in the household waste. Information, about where it is possible to leave the old electrical appliances for free, is provided at your local authority, at the store where you have bought the product. Information, on where you can leave the batteries and accumulators for free, is provided to you at the store, at your local authority.

Ce deClaration oF ConFormity
The manufacturer (authorized representative):
ETA a. s., Zelený pruh 95/97, 147 00 Praha 4 – Braník,
Company Identification No.: 275 44 001,
hereby declares that the hereinafter described product:
Weather station with wireless data transmission:
Hyundai WC 2180,
Purpose of use: signal transmission from the transmitting device to the receiving device in the Czech Republic and in the EU member states, used frequency: 433,92 MHz band is in conformance with the provisions of the GD No. 426/2000 Coll. that is in conformity with the R&TTE Directive 1999/5/EC concerning radio and telecommunication devices. The following technical regulations have been applied in assessing the conformance: Harmonised standards:

  • ETSI EN 300 220-1 V2.3.1 (2010-02)
  • ETSI EN 300 220-2 V2.3.1 (2010-02)
  • ETSI EN 301 489-3 V1.4.1 (2002-08)
  • ETSI EN 301 489-1 V1.8.1 (2008-04)
  • ETSI EN 300 220-1 V2.1.1 (2006-04)
  • ETSI EN 300 220-2 V2.1.2 (2007-06)
  • EN 60950-1:2006+A11:2009+A1:2010+A12:2011

The test results are provided in Test Reports No. GTSE12060069901, GTSE12060069902, GTSS12060032001, GTSE11020009801, GTSE11020009802 and GTSS11020006101 issued by the GTS – Global United Technology Services Co., Ltd., China. The conformity has been assessed according to Annex No. 3 to GD No. 426/2000 Coll. We declare that the product complies with the basic requirements of the above-mentioned GD, i.e. user safety and health protection, electromagnetic compatibility, and effective utilization of the spectrum. Declaration issuance date and venue: 19.7.2012, Praha Authorised person’s stamp:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals