REVO RBL-S Bluetooth Remote Shutter Control for Sony User Manual

: June 6, 2024
: REVO

Table of Contents

Specifications
Precautions
If the Camera Won’t Trigger
Overview
Inserting the Battery
Pairing the Remote and Camera
Trademarks
One-Year Limited Warranty
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

RBL-S
Bluetooth®
Remote Shutter Control
for Sony

Thank you for choosing Revo.
The Revo Bluetooth® Remote allows you to trigger your camera and various functions from up to 32 feet away. Use Bluetooth® low-energy technology to wirelessly shoot photos and start and stop videos. Adjust focus and control your zoom from wide-angle to telephoto with Sony’s compatible power-zoom- equipped cameras and lenses. Carry the compact remote in your pocket and operate your camera at a distance. Functions vary depending on camera make and model.

Specifications

Operating distance: 32 ft. (10 m)
Battery type: 3 V CR2032
Operating temperature: 32°F to 104°F (0°C to 40°C)
Dimensions (H × W × D): 0.5 × 1.25 × 4.3 in. (12.7 × 32 × 110 mm)
Weight: 0.7 oz. (21 g)

Precautions

Please read and follow these instructions, and keep this manual in a safe place.
There are no user-serviceable parts inside the devices. Do not attempt to disassemble or perform any unauthorized modification.
Do not operate in the presence of flammable gas, vapors, or water.
Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the battery when leaving the product unattended for prolonged periods or when no charge remains.
When disposing of batteries, insulate the electrical contacts with tape. Contact with metal objects or batteries may cause a fire or explosion.
Do not use or leave the device in conditions of extreme heat or cold.
Avoid exposing this product to water or extreme humidity, and keep it in a cool, dry place.
Keep out of reach of children. This device contains small parts which may pose a shock hazard.
All images are for illustrative purposes only.

If the Camera Won’t Trigger

Make sure the plastic separator is removed from the battery.
Make sure the battery is installed with the correct polarity.
Set your camera for remote triggering. · Make sure the camera and remote are
paired together, and you are within range. · Make sure the lock switch is not engaged.

Overview

Indicator LED
Wide-angle zoom button
Telephoto zoom button
Shutter release button
AF-ON button
The C1 button Function is the same as the C1 button on the camera. Refer to the camera’s manual for the C1 button setup instructions.
Focus Performs focus function while pressing W (close-up) and T (long distance) buttons. The camera must be set to manual focus (MF).
Zoom Performs zoom function while pressing W (wide angle) and T (telephoto) buttons.
Still: Photo trigger Press the shutter release button to focus and trigger the camera for a single picture. The indicator LED will flash once.
Movie: Video starts/stops Set your camera to video mode. Press the shutter release once to start recording the video. Press again to stop. The Indicator LED will flash when the recording starts and stops. Note: Check your camera’s manual for instructions on capturing video with a remote.
Lock Locks the remote’s controls.
Battery compartment cover Uses a CR2032 type battery.

Inserting the Battery

Place a coin or similar object into the groove of the battery cover, and turn to the open position to remove the cover.
Remove the plastic separator from underneath the battery before use.
Insert the CR2032 battery with the (+) facing up.
Return the battery cover and turn to the close position.

Pairing the Remote and Camera

Note: See your camera’s manual for instructions on setting your camera to remote pairing mode.

On the camera, select MENU>
(network)>Bluetooth Settings> Bluetooth Function>On
On the camera, select MENU>
(network)>Bluetooth Rmt Ctrl>On
On the camera, select MENU>
(network)>Bluetooth Settings>Pairing
On the remote, press and hold the Shutter
release button and T button simultaneously for 7 seconds or more. The remote’s indicator LED will blink. Confirmation will appear on the camera’s LCD when accepted. When a confirmation message appears on the camera’s screen, select OK. When pairing is complete, Paired will appear.

Note: If you’re having trouble pairing, go to your camera’s menu and initiate Reset Network Setting.

Trademarks

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Revo is under license. Other trademarks and trade names are those of their respective owners.

One-Year Limited Warranty

This Revo product is warrantied to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation, or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Revo Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Revo along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit revocinegear.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.

www.gradusgroup.com
Revo is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.
GG4