SCOSCHE MPWDEX2-XTSP Magicmount Pro Charge Extendo User Manual
- June 5, 2024
- Scosche
Table of Contents
INCLUDED EVENTS
A. MagicMount’ Charge4 Magnetic Wireless Charging Mount
B. Telescoping Window/Dash Mount
C. Car Charger
D. Cable Routing Clips (2)
E. MagicPlateN
F. Protective Film
G. StickGrip” Mounting Base
H. Cleaning Wipe
I. Mounting Template for MagicPlate
DEVICE SETUP
SECTION A- iPhones® 12 or Later (with optional MagSafe™ Case)
SECTION B – Wireless Charging Smartphones (with Case) [Phone 11 / Pixel 4 &
Newer (Case Required) Wireless Charging Smartphones (without Case)
SECTION C- Attaching Device with MagicPlate
SECTION D – Window/Dash Mount
SECTION E- Mount Adjustment
SECTION F- Connection & Charging
SECTION A
iPhone 12 or Later (with optional MagSafe Case) If using a case, it must be a
MagSafe case (not included) for MagicMount Pro Charge4 to function properly.
Note: MagicPlate is not required. iPhone 12 or Later (without Case)
Note: MagicPlate is not required.
SECTION B
Wireless Charging Smartphones (with Case) iPhone 11/ Pixel 4 and Newer (Case
required*) Use the included template to place Magica late in the correct
position. *Manufacturing materials do not allow adhesives to bond directly
to the device. Wireless Charging Smartphones (without Case)
Use the included tern plate to place MagicPlate and Protective Film
in the correct position.
It is recommended to use the Protective Rim. If the MagicPlate needs to be
removed, the film simplifies the process. To remove the MagicPlate use a
credit card and slide in between the film and MagicPlate. Do NOT use anything
sharp/ hard as this can damage the device.
SECTION C
SECTION D
Window Mount
- Clean the window surface.
- With the lever in the UP position, place the mount on the window and press the lever down to lock it in place.
StickGrip Dash Mount
-
Select a flat surface and clean using supplied wipe*.
-
Remove protective film from the StickGrip mounting base’. Place the mounting base on the surface and press firmly.
-
With the lever in the UP position, place the mount on the mounting base, and press the lever down to lock in place.
*Supplied cleaning wipe may cause discoloration of certain plastics, vinyl, and painted surfaces. It is recommended to test in an inconspicuous area first.
**Note: StickGrip may leave residue or discoloration on some surfaces. It may also leave a ring of residue when mounted to the dash -
To renew and reuse StickGrip mounting base, rinse under warm water and allow to air dry.
SECTION E
Charging Mount Adjustment Loosethen ball-joint collar to adjust the angle or
rotate the mount 360° Telescoping Arm Adjustment Loosen the front knob to
extend the telescoping arm. Loosen the rear knob to adjust the angle of the
arm.
SECTION F
LED Status Indicators Blue: Charging Flashing Red: Foreign Object Detected
(FOD)
Wireless Charging Head*
Input: 12V *2A
Output: 15w/10w/7 5w/5w
Actual charge rates may vary depending on device software and
environmental conditions.
Car Charger
Input: 12V 24V **6A
Output (Type-C) 5V 3A / 9V 2.22A
Output (DC): 12V ****2A
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Please note that
changes or modifications of this product is not expressly approved by the
party responsible for compliance and could void the user’s authority to
operate the equipment. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Canadian Compliance Statement
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions: (1) this device may not cause
interference and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. This Class [B]
digital apparatus complies with Canadian ICES-003. CAN ICES-3 (B)/NMB-3(B)
For All Australian Sales
This document details the terms and conditions of the warranty provided with
this product. Please disregard any other representations contained on this
product’s packaging or provided with this product that constitutes or appears
to constitute a warranty. This warranty is offered by Scosche Industries, 1550
Pacific Ave, Oxnard, CA 93033 United States. We can be reached at
805-486-4450 or by email: at
sales@scosche.com
Subject to the exclusions and limitations set out below, we warrant to you
that if you purchase a product directly from us, or from any of our authorized
resellers, it will not contain defects that are a result of faulty
manufacturer workmanship or materials.
This warranty subsists for 1 year from the date of purchase. Subject to any
rights you have under the Australian Consumer Law, we will not be liable for
defects that are a result of damage or loss caused by factors beyond our
control, any product which has not been maintained according to any care or
maintenance instructions provided with the product, any alterations to a
product which are not performed by us, or damage or defects caused to the
product due to unusual or non-recommended use. We will not be liable for any
special, indirect, consequential, or economic loss or damage or loss of
profits whatsoever suffered by you or any other person resulting from any act
or omission by us.
Our total liability in respect of this Warranty against Defects is limited to
the replacement of the goods. Any claim made under this warranty must be made
by contacting Scosche Industries. Scosche will then put you in touch with the
closest company to you that will cover warranties.
All Returns of a defective product will be sent at your expense, to be
exchanged for a replacement. This Warranty against Defects is provided in
addition to other rights and remedies that you may have at law. Our goods come
with guarantees that cannot be excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and for
compensation for any reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
CE: Declaration of Conformity Hereby, Scosche Industries Inc. declares that
the product type MPQ4 is in compliance with Directives 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
Internet address: www.scosche.com
This equipment should be installed and operated with a minimum distance of 10
cm between the device & your body
(a) Frequency bands 111-148KHz.
(b) Maximum radio-frequency power transmitted in the frequency bands in which
the radio equipment operates: The maximum power for all bands is less than the
highest limit value specified in the related Harmonized Standard. The
frequency bands and transmitting power(radiated and/or con-ducted) nominal
limits applicable to this radio equipment are as follows: 29.31dBuA/m at 3m,
SAR 6.176V/m at 10 cm distance
(c) Max operation temperature is 25°C
FCC:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator & your body.
Product Name: Wireless Car Charger and Car charger
Model: MPQ4
Company Name: Scosche Industries Inc. Address: 1550 Pacific Ave., Oxnard CA
93033, USA
IC:
This device complies with RSS-216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference. RSS-Gen
Issue 5 March 2019
MagicMount PRO CHARGE’ How-To Video …https://qrco.de/bc6IEM
Scosche Industries
1550 Pacific Avenue Oxnard, California 93030
Phone: 800-363-4490 x1 /
805-486-4450 x1
www.scosche.com
©2021 Scosche Industries
Scosche, MagicMount, MagicPlate, and StickGrip are all trademarks of Scosche
Industries. Other marks or brands are the property of their respective owners.
Devices and or appearance may vary.
Designed in Oxnard, California
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>