SILVERCREST STVT 21 B1 Desk Fan Instruction Manual

: June 5, 2024
: SILVERCREST

SILVERCREST STVT 21 B1 Desk Fan

Warnings and symbols used

The following warnings are used in this user manual and on the packaging:

| DANGER! This symbol in combination with the signal word “Danger” marks a high-risk hazard that if not prevented could result in death or serious injury
---|---
| WARNING! This symbol in combination with the signal word “Warning” marks a medium-risk hazard that if not prevented could result in death or serious injury
| CAUTION! This symbol in combination with the signal word “Caution” marks a low-risk hazard that if not prevented could result in minor or moderate injury
| CE mark indicates conformity with relevant EU directives applicable for this product
| NOTE: This symbol in combination with “Note” provides additional useful information
| Danger – Risk of electric shock!
| Only use the product in dry indoor rooms .
| Do not put fingers through grille .
| Alternating current/voltage

DESK FAN STVT 21 B1

Introduction

We congratulate you on the purchase of your new product . You have chosen a high quality product . The instructions for use are part of the product . They contain important information concerning safety, use and disposal . Before using the product, please familiarise yourself with all of the safety information and instructions for use . Only use the product as described and for the specified applications . If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it .

Intended use

This product is intended to produce a cooling airflow . Any other use not mentioned in these instructions may cause a damage to the product or create a serious risk of injury .

This product is only intended for private household use, not for commercial purposes .

The manufacturer accepts no liability for damages caused by improper use

Scope of delivery

After unpacking the product, check if all parts are in good condition . Remove all packing materials before use

Description of parts

Front grille
Blade
Speed control knob (0, 1, 2, 3)
Rear grille
Tilt angle
Power cord and power plug
Base

Technical data

Input voltage:	220–240 V∼, 50 Hz
Power consumption:	21 W
Protection class:	II/
Description	Symbol
---	---
Maximum fan flow rate	F
Fan power input	P
Service value	SV
Standby power consumption	PSB
Fan sound power level	LWA
Maximum air velocity	C
Measurement standard for service value	IEC 60879:1986 (corr . 1992)
Contact details for obtaining more information	OWIM GmbH & Co . KG

Stiftsbergstraße 1 74167 Neckarsulm GERMANY www .owim .com

Safety instructions
BEFORE USING THE PRODUCT, PLEASE FAMILIARISE
YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

In the case of damage resulting from non-compliance with these operating instructions the warranty claim becomes invalid! No liability is accepted for consequential damage!
In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!

Children and persons with disabilities

****DANGER! Risk of suffocation! Never leave children unsupervised with the packaging material . The packaging material represents a danger of suffocation . Children frequently underestimate the dangers . Always keep children away from the packaging material

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved .
Cleaning and user maintenance shall not be made by children without supervision .
Children shall not play with the product .
No action is needed from users to shift the product between 50 and 60 Hz . The product adapts itself for both 50 and 60 Hz

Electrical safety

WARNING! Risk of injury!
Switch the product off and disconnect it from the power supply before cleaning work and when not in use .
WARNING! Risk of electric shock!
Ensure the rated voltage shown on the rating label corresponds with the voltage of the power supply .
WARNING! Risk of electric shock!
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard

Operation

Only use the product in dry indoor rooms .
Protect the product, its power cord and power plug against dust, direct sunlight, dripping and splashing water

CAUTION! Risk of injury!
Never use the product without the safety grille or with a damaged safety grille .
CAUTION! Risk of injury!
During use, keep hands, hair, clothing and utensils away from the safety grille to avoid injuries and damage of the product

Before use

Unpacking

Remove the packaging . Check if the product is damaged .

Tilt adjustment

Adjust the tilt angle by hand (max . 90°) (fig . B)

Operation

Place the product on a flat, stable ground .
Connect the power plug to a suitable socket-outlet

Turning the product on/off and speed adjustments

Rotate the speed control knob to turn the product on/off and to select a speed setting

Position	Function

0

| Of

1

| Minimum speed

2

| Medium speed

3

| Maximum speed

Cleaning and care

Before cleaning: Set the speed control knob to the 0 position Disconnect the power plug from the socket-outlet

WARNING! Risk of electric shock! Do not immerse the electrical parts of the product in water or other liquids . Never hold the product under running water

Part

| Cleaning
---|---

Product

| Clean the housing with a slightly moistened cloth . Do not allow any water or other liquids enter the product‘s interior

Grilles

| Carefully remove coarse dust deposits with a vacuum cleaner . Wipe the grilles with a slightly moistened cloth . .
For stubborn soiling use a mild detergent on the cloth

Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning .
NOTE: The grilles act as safety guards to protect the user from touching the blade .
After cleaning: Let all parts dry

Storage

When not in use, store the product in its original packaging .
Store the product in a dry, secure location away from children

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities

| Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials
---|---
| The product and packaging materials are recyclable, dispose of it separately for better waste treatment . The Triman logo is valid in France only
| Contact your local refuse disposal authority for more details of how to dispose of your worn-out product
| To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste . Information on collection points and their opening hours can be obtained from your local authority

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery . In the event of product defects you have legal rights against the retailer of this product . Your legal rights are not limited in any way by our warranty detailed below .

The warranty for this product is 3 years from the date of purchase . The warranty period begins on the date of purchase . Please keep the original sales receipt in a safe location. This document is required as your proof of purchase

Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you . This warranty becomes void if the product has been damaged, or used or maintained improperly .

The warranty applies to defects in material or manufacture . This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e .g . batteries) or for damage to fragile parts, e .g . switches, rechargeable batteries or glass parts .

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (IAN 384781_2107) available as proof of purchase

You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product .

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail

You can return a defective product to us free of charge to the service address that will be provided to you . Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred .