Monster Bluetooth FM Transmitter Manual: Learn to Use 2MNCA0116B0A2
- June 5, 2024
- Monster
Table of Contents
The MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter is a versatile device that allows you to stream music and make hands-free calls in your car. Before using the device, it is important to read the safety instructions carefully and keep them handy for future reference. The device should not be disassembled and should not be exposed directly to sunlight or open flame. It is also important to pay attention to the road and not operate the device while driving. The MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter comes with several features such as input 12-24V, FM transmitter with a frequency range of 88.1-1079 MHz, Bluetooth hands-free calling, and USB and Type-C ports for charging devices. The device also supports playing music from USB flash drives, SD cards, and smartphones via Bluetooth A2DP function. The user manual provides detailed instructions on how to set up the device for playing music and making hands- free calls. The device also comes with an EQ switch quick button that can be used to switch sound quality from standard to bass with a short press. The MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules.
MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter
Safety Instructions
- Please read this manual carefully before using
- Keep these instructions
- Do not disassemble
- Do not expose directly to sunlight or open flame
- Pay attention to the road and do not operate this product while driving.
Introduction
Features
- Input 12-24V
- FM transmitter: 88.1-1079 MHz frequency range
- Bluetooth hands-free calling
- Stream music from a smartphone to car system via FM transmission
- USB 1: 5V/2.4A with intelligent input current management
- Type-C: PD 24W
- Support USB flash drive playing
- Support TF card playing
- Supports playing from SD cards
- Car battery monitor
OVERVIEW
- Type-C charging port
- LED display
- Microphone
- Previous song
- Next song
- USB2 fash drive reading & playing port
- USB1 charging port
- SD card slot
- Multifunction knob button:
- Music play modes Switch button change frequency: volume */ answer& hang-up calls
- EQ
Get it Ready for Playing
- Plug 2MNCA0116B0A2 into your car cigarette lighter socket.
- LED display light will turn on and show 13.5- bt-107.9
- Connecting Bluetooth: When the LED display reads bt, it is in pairing mode, and the voice prompt will say “Waiting for connection.”On your smartphone, enable the Bluetooth function, search for available devices, select “MNCA016” and pair with it. Once connected, listen for voice prompt “Bluetooth connection success.” You are now paired.
- Turn on your car’s FM radio and find an empty (only static) channel. Then, adjust the frequency on 2MNCA0116BOA2 to match the frequency of your car radio.
- Adjusting FM transmitter frequency: Press and hold multifunction knob button until frequency display starts blinking: rotate dial to adjust FM transmitting frequency to match car radio frequency.
Play Music
Playing music from your phone
After steps 1-5. you can start playing audio using your smartphone. The music
will stream via the Bluetooth A2DP function: your phone’s FM transmission will
travel to your car radio and through your car’s speakers.
Playing music from a USB flash drive
- Plug USB flash drive into the USB port on the left side with start playing automatically. +/” icon. 2MNCA0116BOA2 will start playing automatically.
Play music from SD card
Insert SD card into SD card slot. 2MNCAO16BOA2]will recognize it by displaying
eF and start playing automatically. Follow the same directions as a USB flash
drive playing mode.
How to switch playing modes
- Press P and hold until LED displays BT or TF (or USB), playing mode will switch.
EQ Switch Quick Button
- The EQ quick button can be used to switch sound quality from the standard (Eqo) to Bass (Eqı) with a short press. Press it again to switch back to standard (Eqo).
Hands-Free Call
- After you set up playing. you can also use the hands-free function.
Under music playing status (BT/SD/USB flash drive), if there is a call coming in, it will switch to call mode automatically. After hanging up it will switch back to playing mode automatically.
Charge Your Device
2MNCA0116BOA2 Bluetooth FM transmitter has one Type-C port and two USB ports, with a total max 36A output in intelligent current sharing mode:
- Type-C” PD 24W
- USB1: 5V/2.4A charging port
- USB 2:5V/1A Max & USB flash drive port:
This port is used for changing low-current devices. Mainly it is used for USB lash drive playing.
Specifications
- DC input: 12V-24V
- Output: Type C PD3.0 20W for iPhone
- Bluetooth: V5.0
- Bluetooth connect distance: 10m
- Audio format: MP3. WMA, FLAC, WAV
- FM transmitting distance: 22m
- USB capacity support: s64Gb
- Working temperature range: -20’C to 40’C
- Storage temperature range: -40’C to 75C
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits] are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, this can be determined by turning the equipment off and on.] The user Is encouraged to try to correct the interference by one more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
FAQS
What are the specifications of the MONSTER 2MNCA0116B0A2 Bluetooth FM
Transmitter?
The specifications of the MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter include DC input of 12V-24V, the output of Type C PD3.0 20W for iPhone, Bluetooth V5.0, Bluetooth connect distance of 10m, audio format of MP3, WMA, FLAC, WAV, FM transmitting distance of 22m, USB capacity support of up to 64Gb, working temperature range of -20’C to 40’C, and storage temperature range of -40’C to 75C.
How do I charge my device using the MONSTER 2MNCA0116B0A2 Bluetooth FM
Transmitter?
To charge your device using the MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter, use the Type-C port and two USB ports with a total max 3.6A output in intelligent current sharing mode.
How do I use the hands-free call function on the MONSTER 2MNCA0116B0A2
Bluetooth FM Transmitter?
To use the hands-free call function on the MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter, answer the call when it comes in, and after hanging up, it will switch back to playing mode automatically.
How do I switch playing modes on the MONSTER 2MNCA0116B0A2 Bluetooth FM
Transmitter?
To switch playing modes on the MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter, press and hold the multifunction knob button until the LED displays BT or TF (or USB), and the playing mode will switch.
How do I switch playing modes on the MONSTER 2MNCA0116B0A2 Bluetooth FM
Transmitter?
To set up the MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter for playing music and making hands-free calls, plug it into your car cigarette lighter socket, connect it to your smartphone via Bluetooth, turn on your car’s FM radio and find an empty channel, adjust the frequency on the device to match the frequency of your car radio, and start playing audio using your smartphone or USB flash drive.
What are the features of the MONSTER 2MNCA0116B0A2 Bluetooth FM
Transmitter?
The features of the MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter include input 12-24V, FM transmitter with a frequency range of 88.1-1079 MHz, Bluetooth hands-free calling, USB and Type-C ports for charging devices, and support for playing music from USB flash drives, SD cards, and smartphones via Bluetooth A2DP function.
What are the safety instructions for using the MONSTER 2MNCA0116B0A2
Bluetooth FM Transmitter?
The safety instructions for using the MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter include reading the manual carefully before using, not disassembling the device, not exposing it directly to sunlight or open flame, and not operating the device while driving.
What is the MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter?
The MONSTER 2MNCA0116B0A2 Bluetooth FM Transmitter is a device that allows you to stream music and make hands-free calls in your car.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>