PROSCEND M366 Outdoor Dual SIM LTE Cellular Router Installation Guide

June 5, 2024
PROSCEND

Outdoor Dual SIM LTE Cellular Router
M366
Version: 1.00
Quick Installation Guide

Physical Appearance

Dimension (W x H x D): 170 x 225 x 89 mm

| | |
---|---|---|---
Front View| Side View| Rear View| Internal View

Hardware Interfaces

PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG
5

| Item| Description

---|---|---
1| SIM| Micro SIM Card slot 1. It’s the default.
2| SIM| Micro SIM Card slot 2
3| ETHERNET| 10/100/1000Mbps Ethernet Port with PoE
4| RESET| Reboot: Press less than 5 seconds
Restore to factory default: Press for at least 5 seconds

Hardware Installation Procedures

  • STEP 1: Unscrew 2 screws and remove the bottom cover. PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG 8
  • STEP 2: Insert a Micro SIM into the SIM holder slot and the second SIM into the slot . Beware of the micro-SIM orientation.  PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG 9
  • STEP 3: Split the rubber plug components. Fix  1 and 2 with the bottom cover.PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG 10
  • STEP 4: Put the Ethernet cable through the hole of the bottom cover and make a new RJ45 connector.PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG 11 NOTE: Ethernet cable is not included in the package.
  • STEP 5: Insert the RJ45 connector into the Ethernet port. PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG 12
  • STEP 6: Put the bottom cover back and screw them tightly. Lock the rubber plug. PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG 13
  • STEP 7: Put the device on a pole at the right height and direction. Fix the router with the pole mounting kit. PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG 14
  • STEP 8: Connect the Ethernet cable to the PoE Injector.PROSCEND M366 Outdoor Dual SIM LTE Cellular Router - FIG 15
  • STEP 9: Power on the PoE Injector.
  • STEP 10: Connect a PC to the PoE Injector for configuration.

LED Indicators

LED ON OFF Blinking
System: GREEN System Ready x System in Booting
LAN. GREEN Ethernet LINK UP Ethernet LINK DOWN Ethernet Data

Transmitting
Internet: GREEN| LTE is connected.| LTE is not connected.| LTE Error
SIM: GREEN| SIM is detected.| No SIM| Slow: SIM Detecting
Fast: SIM Error
Signal: RED, ORANGE, GREEN| Signal Strength:
Low (RED) / Medium (ORANGE) / Good (GREEN)
OFF:
LTE is not connected.

Ethernet Connector

The Ethernet connector follows the EIA-568B wiring pattern.
Pinouts for 10/100Mbps and 1000Mbps data.

Pin Color 10/100Mbps Data 1000Mbps Data
1 White/Orange Tx + Tx Rx A +
2 Orange Tx – Tx Rx A –
3 White/Green Rx + Tx Rx B+
4 Blue X Tx Rx B –
5 White/Blue X Tx Rx C +
6 Green Rx – Tx Rx C –
7 White/Brown X Tx Rx D +
8 Brown X Tx Rx D –

Pinouts for 10/100Mbps and 1000Mbps PoE.

Pin Color 10/100Mbps Power 1000Mbps Power
1 White/Orange V + V +
2 Orange V + V +
3 White/Green V – V –
4 Blue X X
5 White/Blue X X
6 Green V – V –
7 White/Brown X X
8 Brown X X

Wi-Fi (Wi-Fi Model only)

The default Wi-Fi SSID is M366-XXXXXXXXXXXX, where XXXXXXXXXXXX is the device MAC address. You can get the MAC to address on the device label.
Password: 12345678

**Web Access

**

After default reset, the IP address of the device is 192.168.1.1
Username: admin
Password: 2wsx#EDC

NOTE
•Please scan below QR Code to download online resources.
Download Link: https://www.proscend.com/en/product/M366.html

Proceed Communications Inc. All rights reserved.

www.proscend.com
P/N:604040000066

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

PROSCEND User Manuals

Related Manuals