EKEPE US64515 Air Mattress with Headboard User Manual
- June 17, 2024
- EKEPE
Table of Contents
Inflatable Air Mattress
User Manual
US64515 Air Mattress with Headboard
Thank you for purchasing EKEPE Inflatable Air Mattress, To ensure safety and avoid any property damage, please read this user manual carefully before use. We strive to provide you with the best quality products and services in the industry, Please do not hesitate to contact us if you have any questions, We are very happy to assist you.
Attention: PVC/Vinyl Material
- The PVC/Vinyl material of the Air Mattress will naturally stretch and expand during use. After being inflated and/or having been slept on for several days, the Air Mattress may lose some of its initial firmness due to the PVC expanding. This is normal and not a result of air leakage. Use the built-in Air Pump to add air and regain your desired firmness level.
- When you first open the package, there may be an odor from the PVC/Vinyl material of the Air Mattress. Place it in a ventilated area and the odor will dissipate soon after. Don’t worry this is normal and it don’t have toxic.
What is Box:
- Air Mattress (built-in air pump)
- USB Charge Cable
- Patch Kits
- Carry Bag
- User Manual
Introduction for Air Pump:
Size: Approximate 138.48.4cm
Weight: Approximate 0.45KG
Voltage/Current: DC5V and 8A
Material: Outer shell ABS
① Air pump body
② Power switch
③ Handle
④ Deflation port
⑤ Nozzle| ⑥ Inflation port
⑦ Type-C charge port
⑧ Cover
⑨ Buckle
⑩ Indicate power light
---|---
Air Pump Operation Guide:
- To remove the Air Pump, open the Air Pump Cover ⑧ and lift the Handle ③, then pull it out.
- To install the Air Pump, open the Air Pump Cover ⑧ and lift the Handle ③ so that it stands up straight. Insert the Air Pump into the Air Mattress and push down the Handle to lock it in place.
Quick Set Up Guide
TO INFLATE:
- Remove the Air Mattress from its packaging and unfold it. Make sure the felt/flocking texture is facing up.
- Check the Manual Air Valve to ensure it is securely closed. Push the Valve inside the Air Mattress tightly. (See Fig-1)
- Open the Air Pump Cover ⑧ located on the front side of the mattress. Simply click the power button to turn on the Air Pump and start inflating the Air Mattress.
- The inflating process will take approximately 3-5 minutes. For a Twin size mattress, it will take about 3 minutes. For a Queen size mattress, it will take about 5 minutes.If you desire more firmness level you can extend your the inflating time.
- Once the desired firmness level is achieved, turn off the power button to stop the inflating process. Then, close the Air Pump Cover ⑧.
TO DEFLATE:
- Open the Air Pump Cover ⑧ and remove the Air Pump with Handle ③.
- Locate the Deflation Port ④ on the power button side of the Air Pump ①. Attach the Nozzle ⑤ to the Deflation Port ④.
- Pull out the Manual Air Valve and open it. (See Fig-2)
- Connect the Nozzle ⑤ to the Manual Air Valve, which is located on the front side of the Air Mattress. Turn on the power switch to begin deflating the Air Mattress. (See Fig-3)
- After the Air Mattress is fully deflated, close the Manual Air Valve. Then, fold the Air Mattress and pack it away for storage.
Additional Function:
You can use our portable Air Pump as a inflated or deflated tool, with install
the Nozzle ⑤ to inflated or deflated your other inflatable products.
Important Tips:
- When opening the package, there may be an odor from the product due to its PVC/Vinyl material. Please keep it in a ventilated place and the odor will dissipate soon after. Don’t worry this is normal and it don’t have toxic.
- When inflating the Air Mattress for the first time, it is better to let the mattress rest for 8-12 hours so that the seams can buffer.
- It is normal for the Air Mattress to looses a small amount of air after you fully inflate it.
- If you are using the Air Mattress for more than one night, supplement the mattress each day with 10-15 seconds of air to maintain its firmness.
- After 5 minutes of continuous use, the Air Pump will start to generate heat, when it does, allow the Air Pump to cool down for 30 minutes before resuming use.
Troubleshooting:
PROBLEM| CAUSE|
SOLUTION
---|---|---
Pump motor is running but Air Mattress is not inflating or deflating| 1.Air
Pump passage is blocked
2.Air impeller is stuck. 3.Pump not securely attached.| 1.and 2.Keep the Air
Pump passage and impeller is clear.
3.Make sure the Pump is securely attached. (Check the operation guide)
Air Pump does not work| 1.Low/out of battery (indicate lightshow red) 2.Air
Pump is defective| 1.Charge the battery in full (indicate light show green).
2.Remove the Air Pump from the Air Mattress and keep the Air Mattress in a
safe place. Contact our customer service center for an portable Air Pump
replacement.
After inflation air is escaping through the Pumpair passage
or through the Manual Air Valve| 1.Pump not securely attached.
2 .Pump o-ring is dirty. 3.Pump o-ring is damaged. 4.Manual Air Valve Cap is
not securely closed.| 1.Make sure the Pump is securely attached.
2.and 3.Clear or replace the o-ring. 4.Push the Cap firmly and securely into
the Manual Air Valve .
Warning
- Do not place infants aged birth to 15 months on the Air Mattress as they may suffocate.
- Provide at least a shoulder width space between the Air Mattress and adjacent vertical surfaces to prevent entrapment of children.
- Close supervision is necessary when the Air Mattress is used by, or near children, invalids, or disabled persons.
- Turn off the power of Air Pump and store the Air Mattress in a safe place that children cannot access when not in use.
- Do not leave the device unattended when in operation.
- Do not expose the Air Pump to water, other liquids, or rain.
- Keep the Inflatable port, Deflation port, and Charge port clean and free of foreign objects.
- Do not expose the Air Mattress to extreme temperatures. (hot or cold)
- Clean sharp objects such as branches, stones, and glass shards that may scratch the Air Mattress before using.
FAQ:
Q: My Air Mattress looks like it has a leak or it's not firm enough after a few hours of use. Can I return it or get a replacement?
A: Yes, absolutely. If you received a product with a manufacturer defect, you can contact us at [email protected] to request a return or replacement. However, before doing so, please make sure that the issue is indeed due to a manufacturer defect. Our Air Mattress is made of Vinyl Material, which naturally stretches and expands during use. After being inflated and used for several days, the Air Mattress may lose some of its initial firmness due to the Vinyl expanding. This is normal and not the result of an air leak. You can add air to the mattress using the built-in Air Pump to regain your desired firmness level. Most customers may mistake this for an air leak, but it's not.
Q: If my Air Mattress has a leak, how can I find it and patch it?
A: First, make sure that the Air Mattress is actually leaking. Stretching is a natural characteristic of new vinyl, and the first few uses of the mattress may result in some stretching, which can cause the mattress to lose air. It's simply stretching under your body weight, and this is normal for the first few uses. To check the mattress for leaks, first make sure the Valves are secure and tightened. Next, mix liquid soap and wate r in a squirt bottle and spray it on the seams of the mattress. If there is a leak, it will cause bubbles to appear on the surface of the mattress. Note that laundry detergent and dishwasher detergent will not work for this purpose. Once you have located the leak, clean and dry the leaking area before applying the patch that comes with your Air Mattress.
Q: Since my Air Mattress has flocking, how can I use the repair patch - it won't adhere to the flocking?
A: The repair patch is designed for vinyl surfaces only. However, fine sandpaper, or an emery board can be used to gently rub away the flocking. When that is complete, clean the area with nail polish removal solution so the repair patch will adhere to the bed.
Contact information
We have an award-winning warranty, exchange, and customer service team that guarantees hassle-free solutions to any issue you might have within 24 hours.
Email:[email protected]
Website:www.ekepeus.com
Facebook: ekepeus
Documents / Resources
|
EKEPE US64515 Air Mattress with
Headboard
[pdf] User Manual
US64515 Air Mattress with Headboard, US64515, Air Mattress, with, Headboard
---|---