SUPERATV WS-P-RAN-001-XX Full Windshield Instruction Manual
- June 3, 2024
- SUPERATV
Table of Contents
2753 Michigan Road • Madison, Indiana 47250
•855-743-3427
INSTALLATION INSTRUCTIONS
Full Windshield: for Polaris Ranger XP®1000
WS-P-RAN-001-XX Full Windshield
- SuperATV does not recommend keeping a Windshield installed while transporting on an open-air trailer. Remove or secure with straps.
- This item is not returnable if the protective film has been removed.
- Test fit to the cage to confirm fitment before removing the film.
Liability Statement
SuperATV’s ® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV ® and is not recommended.
SuperATV’s ® products could interfere with other aftermarket accessories. If
the user has aftermarket products on the machine, contact SuperATV ® to verify
that they will work together.
Although SuperATV ® has thousands of satisfied customers, users should be
aware that installing lift kits, long travel, or suspension kits, tires, etc.
will change the ride of the machine and may increase maintenance and part
wear. Operating any off-road machine while, or after, consuming alcohol and/or
drugs increases the risk of bodily harm or death. No warranty or
representation is made as to this product’s ability to protect users from
severe injury or death. SuperATV ® urges operators and occupants to wear a
helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should
damages occur, SuperATV ® will not be held responsible for loss of time, use,
labor fees, replacement parts, or freight charges. SuperATV ®, nor any 3rd
party, will not be held responsible for any direct, indirect, incidental,
special, or consequential damages that result from any product purchased from
SuperATV ®. The total liability of seller to user for all damages, losses, and
causes of action, if any, shall not exceed the total purchase price paid for
the product that gave rise to the claim.
SuperATV ® will warranty only parts provided by SuperATV ®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products
will not be covered by SuperATV®. SuperATV® parts and products are not
warranted if the item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket
product to your ATV/UTV may violate certain local, state, and federal laws. Be
advised that laws vary depending on town, city, county, state, etc. Use of
certain products on public streets, roads, or highways may be in violation
law. The Buyer is solely and exclusively legally and personally responsible
for any violation of the law by the installation or use of the product. You
must abide by all local, state, and federal laws, including but not limited to
vehicle safety, traffic laws, and ordinances. It is your responsibility to
know the laws and how they apply to you.
The Buyer is responsible for fully understanding the capability and
limitations of his/her vehicle according to manufacturer specifications,
warnings and instructions and agrees to hold SuperATV ® harmless from any
damage resulting from failure to adhere to such specifications, warnings and/
or instructions. The Buyer is also responsible to obey all applicable federal,
state, and local laws and ordinances when operating his/her vehicle while
using this product, and the Buyer agrees to hold SuperATV violation thereof. ®
harmless from any
“Seal Installation”
To ease installation, soak Seal in hot water before cutting or installing to
increase flexibility.
- Insert Mount Clamps into Windshield.
- Install Windshield to the machine and tighten Mount Clamps.
Windshield Cleaning:
- Do not use Rain-X®, Plexus®, or any other protector, wax, or polish.
- Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
- Never use abrasive cleaners, abrasive pads, or gritty cloths.
- Do not use a windshield wiper blade or install a motorized windshield wiper
- Never use razor blades, scrapers, squeegees, brushes, etc.
- Keep the pressure washer nozzle a minimum of 8” away from Screen Printed Windshields.
- Thoroughly rinse the Windshield to float off dirt and mud.
- Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or hand-washing soap can also be used.
- To prevent water spots, use a chamois to blot the Windshield dry.
IN-WS-P-RAN-001
Documents / Resources
|
SUPERATV WS-P-RAN-001-XX Full
Windshield
[pdf] Instruction Manual
WS-P-RAN-001-XX Full Windshield, WS-P-RAN-001-XX, Full Windshield, Windshield
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>