SCOSCHE MPQ5DV-XTSP MagicMount Pro Charge5 Dash/Vent Wireless Charging Magnetic Stand User Guide

: June 5, 2024
: Scosche

Table of Contents

Included Elements
DEVICE SETUP
FCC Compliance Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SCOSCHE MPQ5DV-XTSP MagicMount Pro Charge5 Dash/Vent Wireless Charging Magnetic Stand User Guide

Included Elements

A. MagicMountN Pro Charge5 Magnetic Wireless Charging Mount
B. Dash Mount
C. Vent Mount
D. MagicPlateTM
E. Protective Film
F. Car Charger
G. Cable Routing Clips (2)
H. Cleaning Wipe
I. Mounting Template for MagicPlate

DEVICE SETUP

SECTION A – iPhone’ 12 or Later (with optional MagSaf? Case)
SECTION B – Wireless Charging Smartphones (with Case) iPhone’ 111 Pixel 4 & Newer (Case Required) Wireless Charging Smartphones (without Case)
SECTION C – Attaching Device with MagicPlate
SECTION D – Dash Mount
SECTION E – Vent Mount
SECTION F – Mount Adjustment
SECTION G – Connection & Charging

SECTION A

iPhone 12 or Later (with optional MagSafe Case) If using a case, it must be a MagSafe case (not induded) for MagicMount Pro Charge5 to function properly.
Note: MagicPlate not required.
DEVICE SETUP

iPhone 12 or Later (without Case) Note: MagicPlate not required.

SECTION B

Wireless Charging Smartphones (with Case)
iPhone 111 Pixel 4 and Newer (Case required*)
Use the included template to place MagicPlate in the correct position.

*Manufacturing materials do not allow adhesives to bond directly to the device.

Wireless Charging Smartphones (without Case)
Use the induded template to place MagicPlate and Protective Film ** in the correct position.

**It is recommended to use the Protective Film. If the MagicPlate needs to be removed, the film simplifies the process. To remove the MagicPlate use a credit card and slide in between the film and MagicPlate. Do NOT use anything sharp/ hard as this can damage the device.
DEVICE SETUP

SECTION C

DEVICE SETUP

Attaching Device with MagicPlate

SECTION D

Dash Mount

Assembly
Insert t-notch hitch on dash mount (A) into opening on back of mount head (B), and slide up into (C) until locking tab clicks into place (D). Disassembly: Press lever up to release locking tab (E). Slide dash mount down to remove (F).

Installation
Clean the mounting surface using supplied wipe* (G). Remove backing from adhesive base, place mount in position (H) and press firmly.

*Supplied cleaning wipe may cause discoloration of certain plastics, vinyls and painted surfaces. It is recommended to test in an inconspicuous area first.

SECTION E

Vent Mount

Assembly Insert
t-notch hitch on vent mount (A) into opening on back of mount head (B), and slide upward (C). Disassembly: Slide vent mount down to remove (D).

Installation
Rotate vent clips on mount (E) to align with vent (F). Note: Works with many vent designs (G). Not compatible with curved or circular vents (H).
DEVICE SETUP

SECTION F

Charging Mount Adjustment

Dash Mount Loosen ball-joint collar to adjust angle or rotate mount 360°.

Vent Mount Rotates 360° only.

SECTION G

LED Status Indicator
Blue: Charging Flashing Red: Foreign Object Detected (FOD)
**Wireless Charger***
Input: 12.0V 2.OA Output: 15.0W/10.0W/7.5W/5.0W

*Actual charge rates may vary depending on device software and environmental conditions.

Car Adapter
Input: 12.0V-24.0V 6.0A
Type-C Output: 5.0V 3.0A / 9.0V 2.22A
DC Output: 12.0V 2.OA
DEVICE SETUP

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Canadian Compliance Statement

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

this device may not cause interference and
this device must accept any interference, including interference that may cause undesired operation of the device.

This Class [B] digital apparatus complies with Canadian ICES-003. CAN ICES-3 (B)/NMB-3(B)

For Australian Sales

This document details the terms and conditions of the warranty provided with this product. Please disregard any other representations contained on this product’s packaging or provided with this product which constitute or appear to constitute a warranty.
This warranty is offered by Scosche Industries, 1550 Pacific Ave, Oxnard, CA 93033 United States. We can be reached at 805-486-4450 or email: at sales@scosche.com
Subject to the exclusions and limitations set out below, we warrant to you that if you purchase a product directly from us, or from any of our authorized resellers, that it will not contain defects which are a result of faulty manufacturer workmanship or materials. This warranty subsists for 1 year from the date of purchase.
Subject to any rights you have under the Australian Consumer Law, we will not be liable for defects which are a result of damage or loss caused by factors beyond our control, any product which has not been maintained according to any care or maintenance instructions provided with the product, any alterations to a product which are not performed by us, or damage or defects caused to the product due to unusual or non-recommended use. We will not be liable for any special, indirect, consequential or economic loss or damage or loss of profits whatsoever suffered by you or any other person resulting from any act or omission by us.
Our total liability in respect of this Warranty against Defects is limited to the replacement of the goods.
Any claim made under this warranty must be made by contacting Scosche Industries. Scosche will then put you in touch with the closest company to you that will cover warranties. All Returns of defective product will be sent at your expense, to be exchanged for a replacement.
This Warranty against Defects is provided in addition to other rights and remedies that you may have at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer law. You are entitled to a replacement or refund for a major failure and for compensation for any reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to major failure.

CE:

Declaration of Conformity
Hereby, Scosche Industries Inc. declares that the product type MPQ5 is in compliance with Directives 2014/53/EU. The full text of the EU declaration of conformity is avail-able at the following internet address: WWW.scosche.com

Frequency bands 111-148KHz.
Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard. The frequency bands and transmitting power(radiated and/or coducted) nominal limits applicable to this radio equipment are as follows: 29.31dBuA/m at 3m, SAR 6.176V/m at 10 cm distance
Max operation tempreture is 25`C

FCC:
This equipment complies with FCC radiation exposure limits set forth for an uncon-trolled environment. This equipment should be installed and operated with a mini-mum distance of 20 cm between the radiator & your body.
Product Name: Anker Wireless Charging Dock for Kindle Paperwhite (Signature Edition)
Model: MPQS
Company Name: Scosche Industries Inc.
Address: 1550 Pacific Ave., Oxnard CA 93033, USA

IC:
This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.RSS-Gen Issue 5 March 2019

MagicMount PRO CHARGES How-To Video …

Scosche Industries
1550 PadficAvenue
Oxnard, California 93033
Phone: 800-363-4490 x1 / 805-486-4450 x1
www.scosche.com
©2021 Scosche Industries

Scosche, MagicMount MagicPlate are all trademarks of Scosche Industries. Other marks or brands are the property of their respective owners. Devices and or appearance may vary.

Designed in Oxnard,California

SI MPQ5DV 10/21