JAMARA 460568 Ride on Offroader Bufalo 12V Truck Instruction Manual
- June 5, 2024
- JAMARA
Table of Contents
- General information
- Suitable for children over 3 years
- Box content
- Parts
- Assembly of the front axle
- Mounting the rear axle
- Mounting the wheels
- Mounting the steering wheel
- Fitting the doors
- Assembling the trailer
- Mounting the seat
- Charging Your Vehicle
- Functions
- Control board
- Spare parts
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
460568 Ride on Offroader Bufalo 12V Truck
Instruction Manual
General information
JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this is due to improper operation or handling errors. The Customer alone bears full responsibility for the proper use and handling, including without limitation, the assembly, the charging process, the use, and the choice of the operation area. Please refer to the operating and user instructions, it contains important information and warnings.
Suitable for children over 3 years
Warning: Not suitable for children under 36 months.
RISK OF SUFFOCATION! Contains small parts which can be swallowed.
Keep away necessarily from children
Due to its top speed, this toy is not suitable for children under 3 years!
- Before playing, remove all protective films from all parts
- This product is not intended for use by individuals (including children) with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge.
- Depending on the development, a minimum age of 4 years could be appropriate
- Maximum weight: < 28 kg Before assembly
- Adult required for assembly. Keep children away while assembling.
- Tools (not included) needed for assembly: screwdriver.
Certificate of Conformity
Hereby JAMARA e.K. declares that the products „Ride-on Offroader Buffalo 12V,
No. 460568, No. 460569“ comply with Directives 2014/35/EU, 2014/53/EU,
2011/65/EU, and 2009/48/EC.
The full text of the EU Declaration of Conformity is available at the
following Internet address: www.jamara-shop.com/Conformity
Read the complete instructions and security instructions carefully before
using the model.
To prevent accidents and injuries, DO NOT leave your child unattended during
the operation of the vehicle. Never let your child out of your sight while
driving a vehicle.
DO NOT use the vehicle on public roads or places or other dangerous locations.
ONLY operate the Ride On Car in places such as private parking, private land
or other safe locations. Make sure that no person or animal is endangered.
The model stops after releasing the accelerator, independently on a horizontal
surface. The vehicle has no brake or parking brake. Do not operate the vehicle
DANGER.
-
For safe driving, you should make sure that your child understands and adheres to the following rules:
– Always sit tight, do not get up during the ride.
– Never take additional Children for a ride. (The vehicle is only suitable for 1 person)
– Hold tight.
– Never drive without shoes.
– Never drive in the dark. -
Keep hands, hair, loose clothing, and any other item away from any rotating parts.
-
The Model should not be used in rooms or halls with high humidity, in the rain or on wet surfaces. Risk of malfunction or damage to electronics and housing.
-
The model is not water- or splash-proof. Only operate on asphalted surfaces (such as paving stones). The model is not suitable to be operated in grass or loose soil.
Attention!
Keep the not mounted kit away from small children as it contains swallowable
parts. It must be assembled or checked by an adult to make sure the car is
assembled in the right way before playing.
Box content
- Model
- Battery pack (412620)
- Charger 230 V (412978)
- Assembly tool
- Instructions
Parts
1 | Steering Wheel | 10 | Trailer guardrail |
---|---|---|---|
2 | Instruction | 11 | Trailer guardrail – the front part |
3 | Wheels | 12 | Front axle, assembled |
4 | Bumper | 13 | Rear-axle |
5 | Wheel cover | 14 | Trailer |
6 | Windshield | 15 | Screws |
7 | Doors | 16 | Spanner |
8 | Seat | 17 | Charger |
9 | Trailer guard and spade | 18 | Door bolt |
|
---|---
|
Assembly of the front axle
- Using the spanner (16), loosen the nut on the lower ends of the front axle (12), see illustration.
- Using the spanner (16), loosen the nut on the steering linkage.
- Place the front axle (12) in the correct position as shown in the illustration. Secure the axle on the left, right, and steering linkage with one nut each.
Mounting the rear axle
- Loosen the nuts from the rear axle (13) and remove the washers.
- Guide the rear axle (13) the body and the left-hand gearbox. Make sure that the rear axle protrudes the same distance on both sides.
Mounting the wheels
- Remove the nuts and the washer from the front axle (12) using the spanner (16).
- Now put the wheels (3)and one washer each on the front and rear axle (13) and secure it with a nur. Align the lugs of the wheel covers (5) with the grooves of the wheel and press firmly onto the wheels.
Caution: The ends of the rear axle should stick out the same length on both sides. The gear shafts of all wheels must point inwards towards the body.
Mounting the steering wheel
- Remove the locking screw from the steering wheel (1).
- Connect the cable from the steering wheel to the cable from the model. Fit the steering wheel (1) onto the steering column as shown and secure it with the locking screw.
Fitting the doors
Place the doors (7) in the appropriate position as shown in the illustration.
Press the door bolts (18) down from above through the door and body hinges.
down.
ATTENTION: Be sure to fit the doors on the correct side!
Assembling the trailer
- Put the planks (9, 10, 11) together (see illustration)
- Position the plans so that the 10 pins match the recesses on the trailer. Press the planks on until they snap into place
- Place the trailer on the chassis, align the holes of the trailer with the protruding attachment points on the chassis and press it onto the chassis until it engages (note that the respective indication arrow points in the same direction, L to L, R to R).
Make sure that it is positioned correctly. Refer to the illustration.
Mounting the seat
Position the seat (8) onto the body by inserting the pins on the seat into the
body. Screw it in place with two screws (15).
Bumper
Press the bumper (4) at the front of the body into position until it clicks
into place.
Fitting the windscreen
Press the windscreen (6) into position until it locks into place. 13.
Opening the doors
Press the vehicle door switch and then pull the door outwards to open it.
Battery connection
1&2 Open the cover underneath the seat as shown in the illustration.
- Connect the connectors. Be careful not to reverse the polarity.
- Close the cover.
Charging Your Vehicle
- The power switch must be turned in the OFF position when charging.
- The charging port is under the seat.
- Insert the charger into the socket – the LED lights up green. Connect the charger to the charging socket.
- The LED on your charger lights up red as long as the battery is being charged. If the LED lights green again, the battery is fully charged.
- The charge time is 9 hours.
- When the vehicle begins to run slowly, recharge the battery.
- Do not charge the battery more than once within 20 hours.
- Charger and battery heat up during the charging process.
Warning!
-
Let the model cool off sufficiently after each use before putting it back into operation.
When using an additional battery let it cool off for minimum of 15 minutes until the model is operated again. Overheating can damage the electronics or may result in fire. -
Always disconnect the model from the charger immediately after charging. Always disconnect the charger from the power supply immediately after disconnecting the model. Inserting the rechargeable model or charger after charging will result in damage to the model, charger, or the power supply (fire hazard).
-
Only use the charger in dry rooms.
Resettable fuse
The vehicle is equipped with a self-resetting fuse. When the current exceeds a
certain rating, the recoverable fuse will automatically cut off the power
supply for 5 – 10 seconds, then the current will be resupplied.
Warning!
Risk of fire. Do not bypass the fuse.
This may overload and damage the electrical system.
Replace only with the original size and type.
Functions
-
Control board
-
Engine sound/next song button:
When the adaptor port and MP3 have no external device input, short press this key will play engine sound; when the adaptor port and MP3 are connected with an external device, or under FM mode, short press this key to play the next song. A long press is a key to increasing the volume. -
Horn button
Short press the button to play the horn. long-press the horn button can reduce the volume. -
Foot pedal switch
Step on the foot pedal switch and the car will move forward, loosen the pedal, and the car will stop. -
Cup holder
****|
---|--- -
High/Low speed
Power on, by default, the forward speed is a high speed, press the High/Low button can change to low speed, press this button again, can change to high speed. For backward, there is only one speed, the High/Low button is in invalid.
Important!
The vehicle must be stationary before changing direction or speed. Otherwise, the gear unit and/or the motor could be damaged. -
/ V-Previous / VOL down
Short press to play the last channel, long press to lower the volume -
Light switches
Power on, by default, the light is on, press the button to turn off the light.
9 / V+Next / VOL up
Short press to play the next channel, and long press to increase the volume. -
Start/Stop
Long press to turn on or turn off the power; When the music or radio is on, a short press can stop it, short press again can restart play it. -
USB
After inserting a USB stick, the soundboard starts playing the tracks one after the other. Only files with the extension .mp3 can be played back. -
Voltage display
Attention!
Your vehicle displays the total voltage of the two batteries in volts immediately after switching on. The fully charged batteries will usually display a total voltage of approx. -
6-13 volts unloaded. The display is load-dependent. This means that the displayed voltage will drop under load. If a voltage of less than approx. 11.8V is displayed in the unloaded state, you should switch off the Ride-on and charge the battery (see charging procedure). Otherwise, the battery may be deeply discharged and irretrievably damaged.
Otherwise, the battery may become deeply discharged and be irretrievably destroyed.
A deeply discharged battery is not covered by the warranty and must be replaced at a charge. -
Aux Connect MP3 device/mobile.
-
Charging socket
Control board
-
FM radio search
In FM mode, press this button will search the FM channel.. -
FM station
Press this button to enter the FM mode. -
Switch between Music, flash driver, and AUX
Press this button to enter the music mode. Can switch between different play modes.(Music, flash driver, AUX) -
Forward:
Press the forward button, step on the foot switch the model will move forward, loosen the pedal the car will stop. -
Reverse:
Press the reverse button, step on the foot switch the model will move reverse, loosen the pedal the car will stop.
Only use in direct supervision of an adult!
To control the vehicle a minimum skill level and caution are needed. Make sure
you are familiar with the operation of the model and its characteristics. The
model is heavy. This is an increased risk of injury and damage in the event of
loss of control. Avoid any kind of intentional or unintentional collisions
with objects or hazards to persons.
Caution
Always switch off the model immediately after each use. Immediately after each
use, the battery should be disconnected from the model. The battery can be
deeply discharged by leaving it switched on accidentally or leaving it plugged
in.
The deep discharge causes the battery to lose power or can be damaged to such
an extent that charging or discharging is no longer possible or the battery
can self-ignite during charging or discharging (fire hazard). Never attempt to
charge or discharge deeply discharged batteries. The battery voltage should
never fall below 11,9 volts to avoid deep discharge. The fully charged battery
has a voltage of approx. 13 Volt.
After use, the intact battery should be fully charged immediately after a
cooling phase of at least 10 minutes but at the latest after 12 hours to avoid
subsequent deep discharge by self-discharge. If the battery is not used or
stored for a longer period of time, the battery should be checked for voltage
(min. 12,3 volts) or damage at least every 3 months and charged or disposed of
if necessary.
Problem | Source | Solution |
---|---|---|
The battery can no longer be charged | Charger or battery defective. | Check |
charger and battery
The battery can no longer be charged although the battery and charger are OK.|
Charging socket defective (if present)| Check or replace the charging socket.
The journey time is very short.| The battery has been deep discharged or is
worn out.| Use a new battery and avoid deep discharge.
No function| The battery is not or is incorrectly connected.| Connect the
battery (see instructions)
ON/OFF switch defective.| Check or replace the switch.
Can be switched on but does not drive.| Motor cable incorrectly connected or
not connected.| Check and connect motor cable (see instructions).
Can be switched on but does not move. or only direction.| Gas or direction
switch defective.| Check or replace the switch.
Can be switched on but only travels in one direction| Directional switch
defective.| Check or replace the switch.
The active fuse blows and switches the unit off for a few seconds. You will
hear a single dick at the beginning| Overload or electrical short circuit.| Do
not overload or have the until checked.
No sound function on the steering wheel/handlebar| the cable was torn or
crushed during assembly.| Check or replace the steering wheel.
The vehicle has very high wear on switches.| Dirt and moisture damage the
switches.| Do not drive in moisture or dirt such as meadows. gavel. sand. etc.
The rubber tires come loose on the wheels| Ridden on too hot a surface or in
the dirt.| Change tires and avoid hot surfaces and dirt.
The wheel keeps falling off the axle.| Mounted incorrectly.| Check that the
wheel is properly engaged (see instructions).
Spare parts
| Charger 12V| | No. 412620
Battery 12V 4,5 Ah| | No. 413308
Switch panel
---|---|---|---|---|---
| Steering wheel| No illustration| No. 413310
Gearbox left| No illustration| Gearbox right
| No. 413312
Foot pedal| | No. 413313
Wheels| | No. 413315
Wheel cover
| No. 413316
Windshield| | No. 413317
Wheel axle| |
All rights reserved. Copyright JAMARA e.K. 2021
Copying or reproduction in whole or part, only with the expressed permission
of JAMARA e.K.
JAMARA e.K.
Inh. Manuel Natterer
Am Lauerbühl 5 – DE-88317 Aichstetten
Tel. +49 (0) 75 65/94 12-0 – Fax +49 (0) 75 65/94 12-23
info@jamara.com
www.jamara.com
Service – Tel. +49 (0) 75 65/94 12-777
service@jamara.com
References
- jamara.com
- Herzlich willkommen bei der Bay-Tec Modelltechnik!
- jamara.com
- Reitter Modellbau & Robotics - Zubehör, Ersatzteile, Bausätze
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>