LG LRMXS3006S French Door Refrigerator User Manual
- June 5, 2024
- LG
Table of Contents
LG LRMXS3006S French Door Refrigerator User Manual
TROUBLESHOOTING
FAQs
Frequently Asked Questions
Q: What are the best temperature settings for my refrigerator and freezer?
A: The default setting for the refrigerator is 37° Fahrenheit (3° Celsius).
The default setting for the freezer is 0° Fahrenheit (-18° Celsius). Adjust
these settings as necessary to keep food at desired temperatures. Milk should
be cold when stored on the inner shelf of the refrigerator. Ice cream should
be firm and ice cubes should not melt in the freezer. To switch the display
from Fahrenheit to Celsius, press and hold the Freezer and Refrigerator
buttons until you hear a beep and the settings in the display change.
Q: How do I set the refrigerator and freezer temperatures?
A: Continually press the Refrigerator or Freezer button on the control panel
until the desired temperature appears. The numbers will cycle from highest to
lowest and then return to the highest again with continuous pressing.
Q: Why do I hear a buzzing noise from my refrigerator periodically?
A: This may happen if you do not have a water source attached to your
refrigerator and the icemaker is turned on. If you do not have a water source
attached to the back of the refrigerator you should turn the icemaker off.
Q: Why does the icemaker tray look crooked?
A: This is a normal part of the icemaker cycle. The icemaker tray may appear
level or with a slight tilt.
The change in position is to assist in the freezing process.
Q: My refrigerator is powered on and the controls are working, but it’s not
cooling and the display shows “OFF” (see below). What is wrong?
A: The refrigerator is in Display Mode. The Display Mode disables all cooling
in the refrigerator and freezer sections to conserve energy while on display
in a retail store. When activated, OFF is displayed on the control panel and
the display remains on for 20 seconds. With either refrigerator door opened,
press the Ice Plus button 3 times consecutively while pressing the
Refrigerator button. The control panel beeps and the temperature settings
display to confirm that Display Mode is deactivated. Use the same procedure to
activate Display Mode.
Before Calling for Service
Review this section before calling for service; doing so will save you both time and money.
Cooling
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>