brother NC-9000W 2.4-5GHz Wireless Wi-Fi Module Instruction Manual
- June 3, 2024
- Brother
Table of Contents
brother NC-9000W 2.4-5GHz Wireless Wi-Fi Module
WARNING
Indicates a potentially hazardous situation which, if the product is handled
without following the warnings and instructions, could result in death or
serious injuries.
IMPORTANT
Indicates a potentially hazardous situation which, if not avoided, may result
in damage to property or loss of product functionality.
WARNING
- Do not use the machine with the Wireless Module installed in environments with other equipment, such as near medical equipment. Electromagnetic waves may cause medical equipment or other special equipment to malfunction.
- This product generates a weak magnetic field. If you feel anything wrong with the operation of your pacemaker when near the product, move away from the product and consult a doctor immediately.
- Keep the Wireless Module out of the reach of children, particularly infants, otherwise injuries may occur.
IMPORTANT
- Only use the Wireless Module with the specified machine.
- Place the machine on a stable surface, such as a level desk, before installing or removing optional accessories.
- When installing optional accessories on the machine, do not allow cords to be trapped under or between machines. Otherwise, damage or malfunctions may occur.
Mounting
Turn your machine’s wireless network feature ON from the control
panel. For more information, see the Online User’s Guide at
support.brother.com/manuals.
Federal Communications Commission (FCC) Supplier’s Declaration of
Conformity (USA Only)
Responsible Party: Brother International Corporation
200 Crossing Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: 908-704-1700
declares, that the products
Product Name: Color Laser Printer
Model Numbers : HL-L9410CDN/HL-L9430CDN/HL-L9470CDN/HL-EX470W Product
Name: Multi Function Printer
Model Numbers : MFC-L9610CDN/MFC-L9630CDN/MFC-L9670CDN/ MFC-EX670W comply
with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
(Wireless network models only)
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
IMPORTANT
Changes or modifications not expressly approved by Brother Industries, Ltd.
could void the user’s authority to operate the equipment.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed down
through the MAC, through the digitaland analog baseband, and finally to the RF
chip. Several special packets are initiated by the MAC. These are the only
ways the digital baseband portion will turn on the RF transmitter, which it
then turns off at the end of the packet. Therefore, the transmitter will be on
only while one of the aforementioned packets is being transmitted. In other
words, this device automatically discontinue transmission in case of either
absence of information to transmit or operational failure.
Frequency Tolerance : 20 ppm
RF Exposure Notice (USA or Canada Only) (Wireless Models Only)
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20 cm
or more away from a person’s body.
Industry Canada Compliance Statement (Canada Only)
This Class A digital apparatus complies with Canadian ICES–003.
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of this device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>