HONDA GL1800B-BD Passenger Audio Switch Instruction Manual

June 13, 2024
Honda

HONDA logo GL1800B-BD Passenger Audio Switch
Instruction Manual

GL1800B-BD Passenger Audio Switch

INSTALLATION INSTRUCTIONS
Accessory
PASSENGER AUDIO SWITCH
P/N 08A70-MKC-A00

Honda Dealer: Please give a copy of these instructions to your customer.

PARTS LIST

HONDA GL1800B BD Passenger Audio Switch

No. Description Qty
1 Installation Instructions URL 1
2 Passenger audio switch 1
3 4 mm screw 2
4 Right switch cover 1

TOOLS REQUIRED’

Phillips screwdriver
Torque wrench

TORQUE CHART

Tighten all screws, bolts, and nuts to their specified torque values. Refer to the Service Manual for the torque values of the removed parts.

Item N•m kgf•m Ibf·ft
4 mm screw 1 0.1 0.7

INSTALLATION

CAUTION

  • To prevent burns, allow the engine, exhaust system, radiator, etc., to cool before installing the accessory.

NOTE:

  • Disconnect the negative (-) cable from the battery before installing this accessory.
  • The clock memory will be erased when you disconnect the battery. Reset the clock after reconnecting the battery.
  • Reinstall the removed parts on the motorcycle and make sure that the wires and harnesses are not pinched.
  1. Open the left saddlebag lid as shown.
    • Repeat on the right side.HONDA GL1800B BD Passenger Audio Switch - PARTS
LIST

  2. Remove the left side cover as shown, and disconnect the negative (-) cable from the battery.HONDA GL1800B BD Passenger Audio Switch - cover

  3. Remove the right side cover in the same manner as the left side.

  4. Remove the seat as shown.
    • Disconnect the connector for GL1800/D/DA.HONDA GL1800B BD Passenger Audio
Switch - PARTS LIST1

  5. Remove the right passenger grip as shown.HONDA GL1800B BD Passenger Audio Switch - passenger grip

  6. Remove the right saddlebag switch cover as shown.HONDA GL1800B BD Passenger Audio Switch - saddlebag

  7. Remove the dummy connector as shown.HONDA GL1800B BD Passenger Audio Switch - dummy

  8. Route and connect the passenger audio switch harness through the right saddlebag as shown.HONDA GL1800B BD Passenger Audio Switch - saddlebag1

  9. Install the passenger audio switch and right switch cover onto the right saddlebag as shown.HONDA GL1800B BD Passenger Audio Switch - saddlebag4

  10. Install the motorcycle’s parts in the reverse order of removal.
    Confirm that any wire harness is not caught or too tight.

  11. Check the passenger audio switch, headlight and the other lights for proper operation.

HONDA logo Application
GL1800/D/DA
GL1800B/BD
Publication No.
MII 16426 Issue Date
January 2018

Documents / Resources

| HONDA GL1800B-BD Passenger Audio Switch [pdf] Instruction Manual
GL1800-D-DA, GL1800B-BD, GL1800B-BD Passenger Audio Switch, GL1800B-BD, Passenger Audio Switch, Audio Switch, Switch
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals