Nedis SCBI9000BK Night Vision Monocular User Manual

: June 5, 2024
: nedis

SCBI9000BK Night Vision Monocular

Nedis SCBI9000BK Night Vision Monocular

User Manual

Preface

Thank you for purchasing the Nedis SCBI9000BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

This product is a monocular intended for observing up to 150 meters in completely dark conditions.

This product can also be used as a video recording device.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Night Vision Monocular

---|---

Article number

|

SCBI9000BK

Dimensions (l x w x h)

|

190 x 83 x 56 mm

Weight

|

345 g

Input power

|

4.2 VDC

Batteries

|

3x 1.5 V AA (not included)

Optical zoom

|

5x

Digital zoom

|

3x

Operating time

|

6 hours

Objective lens diameter

|

32 mm

Eye relief

|

20 mm

Field of view

|

87/1000 mm

Spectrum range

|

450 – 1100 nm

Viewing distance in dim light

|

2.0 m

Viewing distance in total darkness

|

100 – 150 m

Minimum working illumination

|

0.001 Lux

IR illumination adjustment

|

9 levels

Focal length

|

57 mm

Video resolution

|

640 x 480 pixels

Photo resolution

|

0.3 MP

MicroSD card

|

4 – 32 GB (Class 10) (not included)

Connections

|

Mini USB, 3.5 mm AV output

Main parts (image A)

A

1. Objective lens cover

2. Focus ring

3. Hand strap

4. Down button

5. Up button

6. Mode button

7. Power button

8. Diopter mark

9. Ocular lens

10. Diopter ring

11. Auxiliary illuminator

12. Picatinny rail

13. Tripod mount

14. Mini USB port

15. Video transmit port

16. MicroSD card slot

17. Battery cover

Symbols (image B)

B

1. Battery level indicator

2. Camera mode indicator

3. Available storage for photos or video

4. MicroSD card indicator

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
Do not expose the product to water or moisture.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Protect the product from excessive lighting. Do not use the product in daylight. Do not point the product at a bright light source. This can cause damage of your product.
Only power the product with the voltage corresponding to the markings on the product.
Wipe the battery terminals with a clean dry cloth if they are dirty.
Non-rechargeable batteries are not to be recharged.
Do not short-circuit a battery.
Children of less than 8 years should be kept away.
Cleaning and user maintenance shall not be done by children without supervision.
Make sure to match the (+) and (-) polarity markings.
Do not clean the inside of the product.
For more detailed information about disposal of your old battery, check the local rules and regulations for the correct disposal instructions.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Setting up the product

1. Remove the battery cover A17.

2. Insert 3 type AA batteries (not included) into the battery compartment. Make sure that the battery polarity (+/-) matches the polarity markings inside the battery compartment.

3.If you want to save photos or videos, insert a 4-32 GB Class 10 microSD card into the microSD card slot Au.

4. Place back A17.

5. Press the power button A7.

Look through the ocular lens A9. The screen lights up.
If the screen does not light up, check if the batteries are charged and have been installed correctly.

Use

Using the product

Rain, fog, snow or smoke can negatively influence the viewing distance and image quality.

1. Remove the objective lens cover A1.

Leave the lens cover A1 on during daylight.

2. Press A7 to switch on the product.

The product starts up in observation mode.

3. Look through the ocular lens A9.

4. Rotate the diopter ring A10 to adjust the light sensitivity.

5. Rotate the focus ring A2 to adjust the focus distance.

6. Press the up and down buttons A45 to adjust the digital zoom.

In dark environments, the infrared lamp switches on automatically.
The objective lens is equipped with an optic filter. Remove the optic filter in low light conditions.

Making photos

The product has no internal storage. Photos can only be saved on a microSD card (not included).

1. Press A7 when the product is in observation mode to take a photo.

Making videos

The product has no internal storage. Videos can only be saved on a microSD card (not included).

1. Press A6 to enter video mode.

2. Press A7 to start recording.

3. Press A7 to stop and save the recording.

Viewing photos and videos

1. Double press A6 to enter playback mode.

2. Press A4 or A5 to browse the stored files.

3. During video playback, press A7 to start and pause playback.

Deleting photos and videos

1. Double press A6 to enter playback mode.

2. Press and hold A6 on the file you wish to delete.

3. Press A4 or A5 to select Yes.

4. Press A7 to confirm.

Adjusting screen brightness

1. Press and hold A6 to enter the settings.

2. Press A6 to select the screen brightness setting.

3. Press A4 or A5 to adjust the screen brightness. Select level 1-9.

4. Press A6 to confirm.

The product returns to observation mode after 5 seconds of inactivity.

Infrared light settings

The product is equipped with an infrared lamp Aw for increased visibility in dark environments. By default, Aw automatically switches on in dark environments. You can also set Aw to manual mode to manually switch it on and off.
If the infrared lamp is switched on, the brightness level is indicated on the screen.

Using A11 in manual mode:

1. Press and hold A6 to enter the settings.

2. Press A6 to select the infrared lamp brightness setting.

3. Press A4 or A5 to adjust the infrared lamp brightness.

4. Press A6 to confirm.

The product returns to observation mode after 5 seconds of inactivity.

Setting the time and date

1. Press and hold A6 to enter the settings.

2. Press A6 to select the time setting.

3. Press A4 or A5 to change the value between the arrows.

4. Press A7 to select the next value.

5. After setting all numbers, press A7 to confirm.

Connecting the product to an external monitor

1. Plug a cable into the video transmit port Ay.

2. Plug the other end of the cable into an external monitor.

Switching off the product

Press and hold A7 for 3 seconds to switch off the product.
When the product is not in video recording or playback mode, the product switches off automatically after 3 minutes of inactivity.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---