wiltec HW-702A External Aquarium Filter Instruction Manual

wiltec HW-702A External Aquarium Filter

Read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further developments.

The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.

If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to: service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch

Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany

In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to contact us briefly beforehand or to place your order via the webshop.
E-mail: service@wiltec.info
Tel: +49 2403 55592-0
Fax: +49 2403 55592-15
To return your goods for exchange, repair or other purposes, please use the following address. Atten-tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592-0
Fax: (+49 2403 55592-15)

Introduction

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it.
Keep these operation instructions in a safe place.

The advantage of the external aquarium filter is that it takes up very little space inside the aquarium. An external aquarium filter can easily be placed under or next to the fish tank. The 360° rotatable hose connections on the top of the lid allow for optimal positioning. Due to its large volume, the canister offers enough space for various filter media to ensure an effective filtering process.

The SunSun external aquarium filters of the HW series can easily be connected to fish tanks with large volumes of water. Filtering large aquariums becomes a finger exercise. The external aquarium filter series is characterised by its high flow rate and yet quiet operation. Its rubber feet provide for an optimal vibration attenuation. The extremely quiet SunSun series filter technology is suitable for both freshwater and saltwater aquariums.

Parts list

pipe
2| Hand pump| 8| Decor moulding| 17| Inlet basket
3| Switch| 9| Canister| 18| Suction cup
4| Lid| 9-1| O-ring canister| 19| Skimmer
4-1| Cover pump shaft and impeller| 10| Filter head| 20| Outlet elbow
4-2| Pump shaft and impeller| 11| Hose| 21| Connection elbow
5-A| Lid clip| 12| Cover filter basket| 22| Connection elbow
5-B| Canister clip| 13| Filter basket| 23| Spray bar
6| Quartz glass tube| 14| Inlet elbow| 24| Spray bar plug

Note: The parts list may vary depending on the model.

• Parts 6, 6-1, and 7 are only available for HW-702B, HW-703B, and HW-704B.
• Part 13:
  • 3 pieces for HW-702A, HW-703A, HW-702B, and HW-703B.
  • 4 pieces for HW-704A, and HW-704B.

Technical specifications

Item| HW-702A| HW-702B| HW-703A| HW-703B| HW- 704A| HW-704B
---|---|---|---|---|---|---
Energy supply| 220–240 V/50 Hz
Power (W)| 24| 33| 35| 39| 55| 54
Max. flow rate (ℓ⁄h)| 1000| 1400| 2000
UV power (W)| ―| 9| ―| 9| ―| 9

Operation

1. Take the inlet/outlet connection piece and push up the small lever ①. Press the connection piece into the lid ② and fasten it by using the small lever ③ (Fig. 1).
2. Unclip all clips at the canister and the lid to open the filter (Fig. 2). Separate the filter head from the canister.
3. You can now add your preferred filter media (Fig. 3).
4. Insert UV lamp and quartz glass tube correctly (Fig. 4). Fasten the filter head to the canister (instruction only for HW-702B, 703B, and 704B).
5. This product is equipped with a protective switch for the UV lamp. When the filter head is separated from the canister, the UV lamp will be turned off automatically for safety reasons. Please make sure to place the filter head carefully on the canister (Fig. 5). Otherwise, the UV lamp will not work (instruction only for HW-702B, 703B, 704B).
6. Close all clips at the canister and the lid carefully (Fig. 6).
7. You can adjust the water inlet and outlet with the small lever of the inlet/outlet connection piece. Push down the lever (Fig. 7) to put the filter into operation. Connect the provided hoses to the in-let/outlet of the filter.
8. Press the button for the manual pump on top of the filter head (Fig. 8) for initial operation. The filter sucks in water through the hose. Repeat this step, if necessary, until the line system is filled with water.
9. The UV lamp must be replaced after 8,000 hours of operation at the latest. Please disconnect the filter from the electricity network before replacing the lamp (only for HW-702B, 703B, 704B).

Filter media

(see Fig. 3)

The included filter media form the basic kit for your external aquarium filter.
Starting with the lowest filtration layer, the order is:
1st layer: mechanical/partial biological filtration
2nd layer: biological filtration
3rd layer: c hemical filtration (activated carbon, peat, phosphate etc.)

If you purchase a 4-stage filter, you can add a mechanical or biological filter layer as required.

Ceramic rings
Ceramic rings can be used for internal and external aquarium filters. Mechanical filter media are used to remove suspended particles. The ceramic rings cause water swirls inside the filter basket due to their special form and large surface. The suspended particles accumulate when sinking to the bottom and are thus removed from the water circulation. In addition, the ceramic rings provide optimal conditions for nitrifying bacteria which reduce nitrite peaks better than conventional filter media.

Filter floss
Filter media like floss or sponges are essential material for every modern aquarium. Filter floss absorbs large dirt particles, sponges reduce nitrate, absorb chemical impurities and provide optimal conditions for nitrifying bacteria.

Bio balls
Bio balls are used as mechanical and biological filter media. They provide optimal conditions for nitrifying bacteria due to their extra-large surfaces and are considered high performance filter media, especially for large filter systems. In contrast to other filter media, bio balls have a practically unlimited life span, which makes them a popular and low-cost filter medium for pond filters, trickle filters and chamber filters.

Activated carbon (optional)
Activated carbon is used to absorb urea, humic substances, pesticides, metabolic products, and similar residues, thus ensuring clean aquarium water. Activated carbon also reduces the concentration of ozone and chlorine in the water. Activated carbon is particularly suitable for pre-treatment of tap water, for turbid water due to suspended particles, and for absorbing residues of medication.

During medication or algae control, the use of activated carbon should be avoided. After the treatment, however, activated carbon is indispensable to remove any residues. We do not recommend leaving activated carbon in the filter over a long period of time. Once the carbon’s capacity has been reached, there is a possibility that the absorbed harmful substances are washed out and get back into in the aquarium water.

When purchasing a new aquarium filter or after a complete cleaning, the nitrifying bacteria population must be accumulated (once again). There are special bacteria cultures that can be added to the aquar-ium filter, thus facilitating the accumulation.

Replace UV lamp

1. Open the filter (Fig. 2 above) and turn the filter head over.
2. Carefully turn the quartz glass tube counter-clockwise ① until you feel a resistance ② and pull it out.
3. Pull out the UV lamp and insert a new one ③.
4. Fasten the quartz glass tube again by carefully turning it clockwise.

Placing into aquarium

(1) = Water level must be 3 cm above inlet bow.
(2) = Suction must be parallel to aquarium wall.

Filter operation and troubleshooting

Noise reduction/ external air
Especially the suction pipe and the connected skimmer must be adjusted to the water level of the aquar-ium and checked for seal tightness. In cases where this is not possible due to the form of the aquarium, the skimmer should be sealed completely to avoid undesirable external air intake.

De-aeration
Take the return-flow hose that conducts the water from the filter to the fish tank and put its end inside a clean bucket placed below the filter. Carry out the de-aeration process (evacuation of air) by activating the manual pump. Please make sure to adjust the highest possible flow rate at the inlet/outlet connection piece. As soon as there are no more air bubbles, seal the hose with a finger and reconnect it to the corresponding pipe at the top edge of the aquarium.

Leakage after installation or cleaning

• A slight leakage after installation or cleaning of the filter is most likely caused by a problem with the sealing between inlet/outlet connection piece and the filter head or lid.
• The inlet/outlet connection piece for the hoses has two O-rings on its lower side to seal the filter head. If these O-rings are dirty, off-centre or damaged, they can no longer seal the filter head properly. Water gets into the filter head. The water leaks from the lowest point of the filter head, which is usually the clips on the side of the filter head and canister.
• This problem is easy to solve. Clean and check the O-rings. Also, make sure to clean the spots where the O-rings are inserted into the filter head regularly. Algae growth or sand can impair or damage the sealing properties of the O-rings if these spots are not cleaned on a regular basis. This problem can also appear after initial operation, e.g., because of sand.
• Please allow sufficient time for cleaning the filter; if this is not done carefully and thoroughly, the filter may still leak even after cleaning.
• If water still leaks from the above-mentioned point despite thorough cleaning, check the fit of the O-rings inside the connection piece. This requires opening the inlet/outlet connection piece. Please contact our customer service in this case.

Regulations for waste disposal

The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was implemented in the German law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed-out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR (Stiftung Elektro-Altgeräte Register) under the WEEE registration number DE45283704.

Disposal of used electrical and electronic devices (intended for use in the countries of the European Union and other European countries with a separate waste collection system for these devices).
The symbol on the packaging or the product itself indicates that this product must not be treated as normal domestic waste but must be disposed of at a recycling collection station for electrical and electronic waste. By disposing of this product correctly, you contribute to the protection of the environment and the health of your fel-low people. Inappropriate disposal threatens the environment and health.

Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by your local commune, the municipal waste disposal facilities, or the store where you purchased the product.

Address:
WilTec Wildanger Technik GmbH Königsbenden 12 / 28
52249 Eschweiler
Germany

Important notice:
Any reprint or reproduction, even of excerpts, and any commercial use, even of parts of this operating manual requires the written permission of WilTec Wildanger Technik GmbH.

References

• Aoyue.de
• Teichtip.de
• WilTec - Ihr Online Shop für Haus, Garten, Werkstatt, Freizeit
• WilTec Wildanger Technik GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>