wiltec 63451 Parcel Letter Box Instruction Manual
- May 15, 2024
- wiltec
Table of Contents
wiltec 63451 Parcel Letter Box
Illustration similar, may vary depending on model
IMPORTANT INFORMATION
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes
in this operating manual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up-to-date,
errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you.
Send us an e-mail to: service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/ .
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch Our postal address is: WilTec Wildanger
Technik GmbH Königsbenden 12 52249 Eschweiler – Germany To return your goods
for exchange, repair, or other purposes, please use the following address.
Attention! To allow for a trouble-free complaint or return, it is
important to contact our customer service team before returning your goods.
Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249
Eschweiler – Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to
always take some basic safety precautions when using this product. Please read
this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Assembly instructions
Do not tighten the screws completely yet. Tighten them after all screws have been set in.
Do not tighten the screws completely yet. Tighten them after all screws have been set in
First set the right side of the locking bar into the hole of the rear wall. When installing the left side, you can first pull the lever of the spring catch. After aligning, let the lever go. Installation is complete.
When installing the lower door leaf, the upper door leaf can be tilted for making this step easier. First install the right side, then the left side.
When mounting the lower door, this is set in first with the upper hinge, then with the lower hinge.
Important note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
CUSTOMER SUPPORT
© by WilTec Wildanger Technik GmbH Item
63451–64259, 64851 Page 8
http://www.wiltec.de
