wiltec 64205 Drywall Lift and Sheetrock Lifter Panel Hoist User Manual
- May 15, 2024
- wiltec
Table of Contents
User’s manual
Drywall Panel Hoist
64205 Illustration similar, may vary depending on model
64205 Drywall Lift and Sheetrock Lifter Panel Hoist
Read and follow the operating instructions and safety information before using
for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities,
please contact us.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes
in this operating manual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up-to-date,
errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you. Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
To return your goods for exchange, repair, or other purposes, please use the
following address. Attention! To allow for a trouble-free complaint or return,
it is important to contact our customer service team before returning your
goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Proper use
- The drywall lift allows one person to lift a drywall panel that is up to 75 × 175 cm in size without assistance. The panel can be raised to a maximum height of 330 cm for attachment to level ceilings or (with the cradle of the lift tilted) to sloped ceilings or side walls.
- The cradle of the lift lowers to 190 cm off the floor for easy panel loading, and can support up to 68 kg.
- This manual explains the assembly, use, and disassembly of the dry wall lift after use for safe transport and simple storage. We strongly recommend our clients to obey the instructions and information for use before using the drywall lift.
Important instructions
ATTENTION!
To protect yourself against serious injury, use common sense and observe
the following precautions when operating the drywall lift.
ALWAYS:
- read the instructions before use and make sure to respect all warnings.
- check the lift before daily use, especially the cable.
- assimilate the lift to the room temperature before beginning to work (movement from a cold to a warm room may cause condensations that can impair the effect of the brake).
- make sure that the brake drum is clean and dry before using the lift.
- keep the work area free of obstacles.
- wear a hard hat when working with the lift.
- pay attention for hanging obstacles when lifting a panel.
NEVER:
- use the lift in case the traverse fixation is not secured with its fastening springs.
- use the lift for any objects but drywall panels.
- lift more than one panel at the same time.
- lift more than 68 kg (150 lbs).
Assembly
Main components
The drywall lift is shipped as several components that must be assembled
before use:
- Frame assembly
- frame assembly, including a lever assembly and telescoping unit
- cradle assembly, without its detachable crossarms
- two cradle crossarm assemblies
ATTENTION!
- Always wear a hard heat and protective goggles.
- Max. lifting charge: 68 kg
- Never exceed the max. lifting charge.
- A damaged, worn, or improperly mounted cable may cause severe injuries or damages. Check cable before each use. Immediately replace a damaged cable.
- Only one drywall panel can be lifted onto the lift at once.
- Store all components of the drywall lift in a dry environment.
- Thoroughly read the instructions for use before operating the drywall panel lift.
Parts list
| No | Description | Qty. |
|---|---|---|
| 1 | Tripod base assembly | 1 |
| 2 | Rollers without brake | 4 |
| 3 | Roller with brake | 1 |
| 4 | Hexagon bolt M1o × 65 | 5 |
| 5 | Hexagon safety nut M1o | 5 |
| 6 | Holder 1 | 2 |
| 7 | Holder 2 | 1 |
| 8 | Hexagon bolt M8 × 3o | 2 |
| 9 | Washer 8 N | 2 |
| 10 | Hexagon safety nut M8 | 2 |
| 11 | Frame | 1 |
| 12 | Hexagon bolt M6 × 35 | 1 |
| 13 | Hexagon safety nut M6 | 1 |
Assembly
Assembling the base group with rollers
Using the hexagon bolts (4), fix the rollers (2 + 3) to the base group. Secure
the hexagon bolts with the hexagon safety nuts (5) (see fig.).
Assembling the
holder
Assemble the holder (6 + 7) as shown and secure the parts with the help of the
hexagon bolts (8), washers (9), and hexagon safety nuts (10).
Final assembly
Set the holder assembled (parts 6 and 7) into the frame (11), then secure the
parts with the help of the hexagon bolt (12) and hexagon safety nut (13).
After that, the upper part of the hoist is set into the base group (see
fig.).
Important note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
https://www.wiltec.de
Item 64205
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>