wiltec 61575 Sheet Metal Folder Instruction Manual
- May 15, 2024
- wiltec
Table of Contents
wiltec 61575 Sheet Metal Folder
Product Information
Specifications
- Model: 61575
- Product: Sheet Metal Folder
- Components: Frame, Handle balls, Pressure plate, Carrier plate, Handle levers, Folding panel
Product Usage Instructions
Safety Precautions
Before using the sheet metal folder, please ensure to follow these safety precautions:
- Read and understand the operation instructions carefully.
- Keep the device out of the reach of children.
- Store the press brake in a safe and dry area.
Mounting Instructions
When mounting the sheet metal folder, follow these steps:
- Clean the press brake with a smooth and clean cloth.
- Ensure all components are securely in place.
- Store the device in a safe and dry area.
Operating Instructions
To operate the sheet metal folder, follow these steps:
- Insert the metal sheet to be folded between the pressure plate and the carrier plate.
- Use the handle levers to apply pressure evenly on the metal sheet.
- Fold the metal sheet using the folding panel.
FAQ
- Q: Where can I find the most recent version of the manual?
- A: The most recent version of the manual in various languages can be found in our online shop via: Manual Versions
- Q: How should I contact customer service for returns or complaints?
- A: To return orders for exchange, repair, or other purposes, please contact our customer service team before returning the goods. You can send an e-mail to: service@wiltec.info or use our contact form.
Read and follow the operating instructions and safety information before using for the first time.
- Technical changes reserved!
- Due to further developments,
- illustrations, functioning steps, and technical data can differ insignificantly. Updating the documentation
- If you have suggestions for improvement or have found any irregularities, please contact us.
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights re- served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible
mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible
efforts to ensure that the operating manual is complete, faultless, and up to
date , mistakes cannot be entirely
If you should find a mistake or wish to make a suggestion for improvement, we
look forward to hearing from you.
Send an email to:
- service@wiltec.info
- or use our contact form:
- https://www.wiltec.de/contacts/
- The most recent version of this manual in various languages can be found in our online shop via:
- https://www.wiltec.de/docsearch
Our postal address is:
- WilTec Wildanger
- Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
- Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention! To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
Returns Department
- WilTec Wildanger Technik GmbH
- Königsbenden 2852249 Eschweiler
- Email: service@wiltec.info
- Tel: +492403 5559 2 0
- Fax:+49 2403 5559 2 1 5
Introduction
- Thank you for purchasing this quality product.
- To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device.
- Please read the operation instructions carefully and make sure you have understood its content.
- Keep these operation instructions safe.
Safety notes and warnings
- Keep your working area clean and tidy. Crowded and untidy work areas increase the danger of injury.
- Consider the conditions of your workspace. Your work area should always be well-illuminated.
- Keep children away. Children are not allowed to be in the direct surroundings of the workspace. Do not allow them to operate machines, tools, or extension cables.
- Store equipment that you are not using. Store devices and tools unused in a dry area to protect them from rust. Keep tools and devices out of the children’s reach when storing them.
- Never apply too high a pressure on the device. Work will be safer and more effective when the device is used within the range of speed that it was designed for.
- Do not attach any additional components to the device to exceed the maximum ratings of the device.
- Use the right tool/device for every work to be carried out.
- Do not try to use smaller tools by force to carry out the work of bigger industrial tools.
- Use tools and devices only for their intended purpose.
- Dress adequately. Do not wear loose clothing or jewellery which can get caught in moving parts. Protective clothing and non-slip shoes are recommended during work. Tie long hair together or wear a hairnet.
- Wear eye and hearing protection. Always wear a pair of shatterproof safety glasses. When metal or wood splinters or dust is created during the work process, wear a full face cover.
- Wear a respiratory mask or a breathing apparatus when working with materials such as wood or metal or when coming into contact with chemical vapours or dust particles.
- Never lean too far forward. Make sure that you have a secure positioning and can always hold your balance. Never reach over a running
- Care for and maintain your tools and devices thoroughly. Keep tools sharp and clean to allow a good working result. Follow the instructions on greasing and exchanging spare parts.
- The handle needs to be clean, dry, and free from oil and lubricants.
- Stay aware. Focus on what you are doing and carry out work with care and thoughtfulness. Do not use devices and tools if you are tired.
- Check the device before every use for damaged parts. If any part seems damaged, the device should be thoroughly checked to make sure that its performance is not affected in any way.
- Check the alignment and connection of the moving parts, the mounting devic es, and examine the device for possible broken parts or impairments on the performance. Broken parts need to be repaired or exchanged properly by a qualified technician.
- Do not use the device if you are under the influence of drugs, alcohol, or medicine. Read the warning and safety notes included in the package insert to make sure that your judgement and reflexes are not affected by the medicine negatively.
- If you are unsure, you should not use the device.
- Never exceed the maximum bending capacity of 760 mm (30″) thick material or 1 mm steel.
Mounting and operating instructions
- Attach the frame 1) to the workbench via 0.95 cm (⅜″) mounting bolts (not included in the de- livery).
- Attach the handle balls 4) to the handle levers 3) and then attach the handle levers to the frame (see illustration).
- For an easier use, please use a scriber (not included in the delivery) to engrave a straight line into a metal sheet and be able to fold it afterwards.
- Position the material needing to be folded above the carrier plate 5) and below the folding panel 6).
- Place the wider base of the pressure plate above the material. Match the corner to the marked folding line.
- Please note: First test the device on a scrap metal sheet to determine the required distance.
- To keep the pressure plate down, use clamps (not included in the delivery) or other tensioning tools.
- Lift the handle levers, to fold the material in the desired angle.
- Warning: During the use, keep your fingers away from the carrier plate and the moving plates.
- Please note: The handle levers are not designed to be attached to the frame continuously.
- When the work is finished, remove the pressure plate and clean the surface. Then clean the press brake with a smooth and clean cloth and store the press brake in a safe and dry area out of the reach of children.
Components and their names
| № | Name | Qty | № | Name | Qty |
|---|---|---|---|---|---|
| 1 | Frame | 2 | 4 | Handle balls | 2 |
| 2 | Pressure plate | 1 | 5 | Carrier plate | 1 |
| 3 | Handle levers | 2 | 6 | Folding panel | 1 |
Technical Data
| Bending capacity | 90° (760 mm [30″] / 1 mm steel) |
|---|---|
| Mounting hardware | Requires four ⅜″ diameter bolts, nuts, and flat |
washers (not supplied)
Important notice The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>