LAVA Spreadtrum Platform Phone User Guide

Spreadtrum Platform Phone
User Guide
Thank you for choosing this Spreadtrum Platformphone.

This device will offer you unprecedented surprise for it can support GSM cards and multiple cards standby. Meanwhile, this phone is equipped with a 3-megapixel HD digital camera, an MP3 Mobile Music, and an MP4 video player. Enjoy yourself!

Safety

Please go through, and comply with, the following considerations before using this phone.

• Please take earphones if making or Answering incoming calls while driving or after your car is parked.
• Anyone may be susceptible to interference, which could affect performance.
• Please use the original battery and accessories in order to have optimal performance and prevent phone damage. Please don’t use unmatched products.
• To avoid interference with blasting work, please turn off the phone on the site or where the two-way radio must be switched off. Please observe the local rules.
• If your phone needs to be connected to another device, please read the User Guide of the latter.
• Please copy or keep a written copy of the vital information stored in your phone.
• The phone may interfere with aircraft telecommunication. So please turn if off or switch to flight mode during the flight.
• Please turn off your phone near the medical equipment or in the medical facility where any phone must be out of service.
• Please turn off your phone in the gas station or near fuel or chemicals to prevent an explosion.
• Burning or disposing of phone batteries, as usual, is prohibited, or it may cause life risk or environmental pollution. Please dispose of and recycle it in compliance with the local environmental regulations.
• Some small components (e.g. memory cards, etc.) shall be out of children’s reach; otherwise, they may be swallowed or cause other hazards.
• Ensure the phone is turned on and within the service area. Enter the emergency number, and press the talking key to tell your location. Please don’t end the call without permission.

FCC REGULATIONS
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off  and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each phone are performed in positions and locations as required by the FCC. For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the
body.
Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.
“Many people mistakenly assume that using a cell phone with a lower reported SAR value necessarily decreases a user’s exposure to RF emissions, or is somehow “safer” than using a cell phone with a high SAR value. While SAR values are an important tool in judging the maximum possible exposure to RF energy from a particular model of cell phone, a single SAR value does not provide sufficient information about the amount of RF exposure under typical usage conditions to reliably compare individual cell, phone models.”
World Health Organization (WHO) Advice， Organizations such as the World Health Organization and the US Food and Drug Administration have stated that if people are concerned and want to reduce their exposure they could use a hands- free device to keep their phones away from their head and body during phone calls or reduce the amount of time spent on the phone.

Introduction

Insert SIM card and battery
Long press power supply key for 3s to turn it off;
Slide the back cover downwards and remove it;
Remove the battery. Insert SIM1 (per the mark “SIM” on the card slot. The contractor shall face down (note the notch on the SIM card is in line with the slot). Push the SIM card inwards from the card slot until it absolutely fits the slot. Insert the battery with metallic contact aligned to the phone battery contact and replace the back cover.
Note:

1. This User Guide is designed for both SIM cards inserted by selecting [Settings→Call Settings→Dual-SIM→Standby mode→Dual SIM dual standby]. If only one card is inserted or no Dual SIM dual standby is set up, the screen and options may differ from this manual.

Insert memory card
This phone supports the T-Flash memory card. After it is inserted, you can browse or copy, etc. the files stored in the memory card. Also, the disk space of this phone can be expanded.
Remove the back cover and battery and turn over the cover of the memory card in the direction as shown thereon;
Let the side of the memory card bearing metallic contact face down, insert the narrower end into the slot until absolutely fitted by it, and replace the back cover

Warning:
Please don’t insert or remove the memory card quickly or frequently to avoid damage
Battery charging
The phone battery may be charged with a travel charger Insert the battery in the phone correctly; Open the rubber cover on the left side of this device below the screen,,let the charger arrow towards the screen, insert the charger plug into the screen, and connect the charger to the standard power supply socket.
After the charger is inserted, the battery intensity icon on the upper right of the screen starts running, which means the battery begins charging. When it is charged full, the icon
stops running and the battery icon on the screen comes full. After charging is over, cut off the connection between the charger and the standard power supply socket and then between this device and the charger by pressing the buttons on both sides of the charger。

Note:

1. Please use the standard matched battery and charger to prevent an explosion.
2. If the battery is absolute of no power, the battery icon will appear 2~3min after charging. Charging may take 2~5h depending on the current condition of this device  (whether it is started, any call is made, etc.).
3. Please use the charger to charge this device. USB wire charging shall be avoided if possible.
4. In order to help the new battery perform best, it shall complete 2~3 charge-discharge cycles. Its initial charging shall last for more than 10h unceasingly for each

Power on and off
Power on
Long press power supply key for 3s to turn on this phone
Power off
Long press power supply key for 3s to turn off this phone.
Warning:
Please don’t turn on this phone where it is prohibited or using it may cause interference or danger. In this case, please ensure this phone does not activate the regular power on/off or other function.

Call
Making an overseas call.
Enter the country code (in this case, “+” shall be entered by pressing * twice continuously); Enter the area code (without “0” prefixed to that as usual) and the phone number;
Press “Call”, and escape the SIM card option screen. Select SIM1 to dial with SIM1;
Dialing via Contacts
Enter the Contacts and search for the phone number you need; Press Record for a long time to select Call in the options menu.
Calling an extension number
Enter the switchboard number;
Press “call”, and escape the SIM card select screen. Select SIM1 to dial with SIM;
Making an emergency phone
Enter the emergency phone number; Press “Call”, and escape the SIM card select screen. Select SIM1 to dial with SIM;
Answer or reject incoming calls
If there is an incoming call, press “Answer” to answer it; If there is an incoming call, press “Reject” to reject it;
For incoming calls under the lock situation, slide to the left and right to answer or reject calls.
The menu during a call
During a call, you can :
Hold: Press [Hold] to hold the current call, and press [Activate] to resume the current call when holding the call (the function needs to be supported by the network).
Record: Record the call details, and the document will be kept in the file manager automatically.
Note:
It is illegal to record any call in some countries. So please do so with the speaker’s prior consent.
Mute: Turn off the microphone during the call. In the mute mode, you can hear the speaker but the speaker can’t hear you.
Adjust volume： You can volume the receiver by the side key during a call
Contacts： Enter into the interface of the contact list. Turn on hand- free: Start or cancel a hand-free call.
End a call
Press “Hang up” to end a call.
Call logs
Show the phone numbers missed recently Roll to any number and press the dial button to reply to the call and can press [Options] to select other operations.
Commonly Used Functions
Press the single record for a long time, and open the options menu.
Call： Call this number.
Write SMS: Send SMS to the current number.
Write MMS: Send MMS to the current number.
Add to New Contacts: Store the number on this phone.
More Functions
On the call record interface, press the [Options] button to open the options menu:
Delete All: Delete all phone numbers.
Call timers : The details of the SIM card is available after selecting that card to be viewed.
GPRS counter : Read the information of GPRS volume.
Contacts
Browsing contacts
When this device standby, select [Contacts] and open the name list. The contacts are listed in the order of unnamed, special symbol, digit, and English letter respectively (for Chinese names, the English letter corresponding to their pinyin prevails).
Quick search
When this device standby, select [Contacts] and open the name list. Click the search bar to search and position (vague search is allowed) through the virtual keyboard.
Example: search for “LiSi” (Li Si)
Enter “57”. The first letter of the pinyin of “Li” is “l” and the corresponding key is key 5, press it to locate the Chinese character initialed with “jkl”, where there are two items,  i.e. “Leo”, “LiSi”; the first letter of the pinyin of “Si” is “s” and the corresponding key is key 7, press it to continue locating to the Chinese character initialed with “pqrs”. So “LiSi” can be found out by entering “57” only.
Example 2: search for “sam” Enter key “726” where the letters “sam” are located.
New contact
SIM: The input is added to SIM
Phone: All records other than in SIM are stored in the memory of this device. The editable items include the name, phone number, and Group.
Note: Name may be empty, but phone number shall not be so for any new record.
Function Menu of Contacts
On the interface of the contact list, press “Options” to operate the functions:
Group: Enter into the group list interface.
vCard: Import or export all the cards.
Others: Query the settings of this phone number and speed dial、Own number Service number、Memory status.
On the contacts list interface, press one record to operate the following functions:
Write message ： send one message to the contacts.
Call: ring the contact.
Delete: Delete the person’s information.
Copy: Copy the contact information.
Import/Export: Import/Export the contact.

Multimedia

Camera
Take pictures and video clips with audio through the self-contained camera function. Click the camera icon from the main screen, and switch to the framing menu of the camera. Press the return button to exit the camera procedure.
Browse Shooted Photos or Videos
Delete the photos or videos.
Share through Bluetooth.

DV
This function enables you to record dynamic pictures. In the capture interface, press the OK key to capture a video clip.

Image
Check the pictures and shoot photos in the memory card through the photo album.

1. Click the media library from the main screen.
2. The phone automatically scans the supporting documents in the memory card.
3. Select the needed photo album.
4. Press the Options button to set.

Audio
The phone is able to play music files saved in the phone and the downloaded music and support background play of MP3 file.

Instruction:
MP3 supports MPEG 1 layer 3 audio; supports MPEG 2 layer 3 low sampling rate extension; MPEG 2.5 layer 3 (unofficial).

Play songs:
When play some certain content, select the needed items from the list.
Please press to pause; please press to continue; press or to fast forward or back. Please press or to turn to next or previous.

Click AB to review.
Please select Option > Equalizer to modify the effect of the music player. Please press the Back button to return to the main screen and play at the background by the player. Please press the Exit button to close the player.

List
Select Options > music list and select the list.
Create New List

1. Select Options > new list.
2. Enter the name of the list and select Confirm.
3. Select yes to immediately add the songs; please select No to add the songs later.
4. Select Finish.

Press to pop up the menu to delete or edit a custom list. Select Option > Add music when checking the list to add more songs later on.
Video
The video player supports 3gp, mp4, and avi documents. If the document is the standard format not supported, use the tools to convert it into the standard format.

Play:
When playing some certain content, select the needed items from the list. Please press to pause; please press to continue; press or to fast forward or back. Please press or to turn to next or previous.
Open local browse, local list.
Local browse: Browse the video documents in the phone or memory card. Local list: Play the stored video documents, you can add the videos in the memory card or the phone to the local list for watching next time.

FM Radio
The system will automatically scan channels and record the firstly open FM radio.
Search Broadcast Channel

• Automatically search the broadcast channels, and press the Options button → to scan and save.
• Manually search the broadcast channels, and slide the roller on the screen (move the frequency red line to adjust) to slightly adjust, or manually input the channels.

Background Play
Click the Background play button, and FM plays at the background.
Record
Record (a scheduled record) the playing channels, and automatically save them to the record list.
Sound Recorder
Enter into the function menu to select the Recorder.

1.  Press the Record button on the interface to record.
2. Press the Pause button to pause the record.
3. Press the Stop button to stop the record.
4. After stopping the record, the recording documents will be automatically saved in the “Audio” file in the memory card, click Folder to check.

My file
File Manager can manage the files in the memory card.
Copy Files

1. For copying the files, press to pop up the menu, and enter into the copy mode.
2. Select the target folder, click the confirm icon on the right or click “select the contents” in the folder.
3. Click “Mark” to copy multiple files.

New Folders

1. Open the file manager.
2. Press the Options button → New Folder.
3. Input folder name and click to save.

Message
Message service is actually a network service. This menu works soundly depending on the type of your SIM card and the service provided by the network operator. Therefore, please check it before applying such a function.
Write message
Please have the service center number from the network operator before applying this function. The storage capacity of the SIM card depends on its type.

SMS/MMS
Under the idle situation, press the “information service” button to enter into the mailbox list interface, press [Write message→New SMS/MMS] to enter into the message editor interface, manual input or insert the contacts from the address list as the recipients, press the “send” button to send the messages after editing the contents.
Note: This device supports multi-messaging. Four common SMS are editable at most with each containing 268 Chinese characters or 612 English ones.
Create a message, pressing“Options”, you can:
Insert template: Insert template in the cursor position.
Add contact info: Insert in the message a name and its number from the Contacts.
Add phiz symbol: Insert an expression symbol in the cursor position.
Save as draft: Save the edited message in the Draft box.
Inbox
Save the received SMS/MMS.
Outbox
Save the SMS/MMS not sent out successfully.
Draft box
Save the unsent messages.
Sandbox
Save the SMS /MMS you sent successfully.

Templates
You can create pre-defined messages in this interface.
Broadcast message
This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecasts or road conditions. At present, few networks provide this service. Please consult the network operator.

Voice mail server
This is similar to the Answer machine. You may transfer the incoming call that you fail to answer duly to your Voice mail server, where the caller can leave a message. You are reminded of a message, if any, in the mailbox by a short message. This function is part of the mating software provided by the network operator, so you need to register it, please refer to your network operator for the detail.

Note:
You may transfer any incoming call to the Voice mail server (the number of caller to leave a message) by setting “Call Forwarding”

Application

Alarm
Enter into the function list, and then select Alarm.
New Alarm

1. Turn on the switch of the needed alarm clock.
2. Set the parameters of the alarm clock as needed.
3. Select Save

Calendar
Enter into the function list, and then select Calendar.
Add new schedule

1. Select Options →Add a new schedule
2. Write the schedule details.
3. Select Store.

View schedules

1. Select the date on the calendar, and check the events on a special date.
2. Select [All agenda], and check all the records.

World clock

Understand how to check the time of other areas and set the displayed world time on the screen. In the standby mode, enter the function list and select World time.
Press the Menu button to carry out the following settings:
Set local: Set the selected location and time to local.
Set local : Set the selected location and time to local.

Calculator

1. Select Calculator under function menu mode.
2. Use the buttons matched with the calculator to carry out the basic arithmetic operations.

Memo
The memo refers to any kind of help memory， simple event theme, and related picture， text or voice date Cheat or retain use informal record in the future; Help or evoke memories records; Diary record
E-book
E-books can support files in TXT format. You can copy the TXT file to the [E-book] folder on the T-FLASH card by PC. In standby mode, enter the function menu, and then select [E-book]. Randomly select a book in the bookshelf to read; slide to turn pages.

** Instruction:**
Please delete the unnecessary files when you read the E-book with the hint that there is not enough space. Make sure there is over 500KB of free space on your mobile phone.

Bluetooth
Start Bluetooth Wireless Function

1. Enter into the function menu, and select Bluetooth.
2. Click the switch button to start the Bluetooth wireless function.
3. If allowing other devices to position your telephone, please the switch button behind Visibility.

Search Other Started Bluetooth Devices and Pair

1. Select Paired Device → Add New Device.
2. Select devices from the list.
3. Input the PIN code of the Bluetooth wireless function or other devices (if exist), and then select Having Finished.
   When the owner of another device inputs the same PIN code or accepts the connection, the pair is completed.

Send Data by Bluetooth Wireless Function

1. Select the expected documents or items from the applications in the mobile phone.
2. Select to send through Bluetooth.

Receive Data by Bluetooth Wireless Function

1. Input the PIN code of the Bluetooth wireless function, and then select Having Finished (if necessary).
2. Select Yes to confirm to receive the data of the device (if necessary).

Torch Light
Turn on/off the torch as per your need

Internet

Note:

1. Your Internet service provider may not support some functions, please confirm that your SIM card supports the Internet function and the function has been opened.
2.  To browse WebPages, you might be charged of corresponding flow rate
3. If the WLAN network is applicable, surf the internet through the WLAN interlinks age.

Internet is an application platform integrating wireless communication and Internet technology, which makes it possible for you to access to rich Internet information sources and e-commerce applications etc.

Browser
Open the starting page of the browser, users can enter into input URL, search, bookmarks, history, and stored pages through the interfaces. Press the Options button to open more menus: homepage, settings, clear records, and exit browser homepage, and users can the homepage of ISP internet (set in advance or default homepage).
Current Page：
Option: Enter into the options list of the browser.
Forward\Back: Open the WAP page forward and backward.
Stop: stop loading the WAP webpage
Refresh: Refresh the current WAP page.
Add to bookmark: Add the current WAP page to the bookmark list.
Bookmark: Open the list of the stored bookmark.
History: Open the list of browsing WAP.

Settings

Call settings
Including:
Dual SIM settings: including Standby mode, Reply by original SIM, Set SIM name.
Call Divert:

• Divert all voice calls: After the function is activated, you can divert all incoming calls to Voicemail or the pre-determined phone numbers. Choose [Check Status] to view the current status of the Divert all voice calls service.
• Divert when busy: After the function is activated, you can divert the incoming calls to Voicemail or the pre-determined phone numbers if you are on a call
• Divert when not answered: After the function is activated, if the call is not answered within the pre-determined time, you can divert the incoming calls to Voicemail or tpre-determined phone numbers.
• Divert when phone off or no coverage: After the function is activated, if you are unavailable because there is no coverage or the phone is powered off, you can divert the incomicalls to Voicemail or the pre-determined phone numbers.
• Cancel all diverts: Cancel all the call diverts.

Note:
You have to turn off “Flight mode” before setting “Call divert”.

Call Waiting:

• Activate: After the function is activated, the network will inform you of the new incoming calls when you are on a call. You can hold on to the current call and answer another call.
• Cancel: Cancel the Call waiting service, and the incoming calls will not be informed when you are on a call.
• Check the status: You can check and view the current status of the Call waiting for service.

Call Barring：

• Outgoing calls: All outgoing calls are limited
• Incoming calls: All incoming calls are limited
• Incoming calls when roaming: All calls can not be answered when roaming
• International calls: International calls are limited
• International calls when abroad: International calls are limited when you are abroad
• Cancel all call barrings: All call barrings are canceled
• Edit barringpassword: Barringpassword can be edited

Note:
Some internet service providers may limit the use of this function. For details, please contact your internet service provider.
When you are applying for this service, your internet service provider will offer you the original network password。
Hide My Caller ID: Set the display mode of the phone number.
Others： the settings item include IP Push-To-Talk, Voice calls minute beep, Automatic redial, Vibration for outcoming calls

Phone Settings
The items include:
Time and Date: You can customize time and date as well as their formats
Language: You can customize the display language and writing language.
Shortcut: Select the preferred function as a shortcut on-screen direction key as needed.
Automatic Power On/Off : Set time and repeat ways of the automatic power on/off.
Restore Factory Settings: Restore factory settings
Display Settings:
The settings items:
Wallpaper Settings: Supported wallpapers: Static wallpapers, dynamic wallpapers, and more pictures.
Contrast: adjust the screen brightness.
Auto keypad lock : adjust the keypad lock time.
Keypad Backlight: adjust the backlight time.
Security settings
Including:
PIN code : Start and close of PIN code and the modification of PIN.
Warning
Please use this function cautiously. If you forget the PUK code, please get it from the service provider. Ten consecutive incorrect PUK code entries will make the SIM card unserviceable.
Modify PIN2 code : Modification of PIN2 code.

Warning:
Be cautious to use this function, if the wrong PUK2 code is entered 10 times, the SIM card can not be used.

Phone Lock ： Open or close the phone lock.
Modify privacy password： change the phone password.
Privacy Protection: set the privacy protection
Lock screen by end-key: You can select to turn on/off this function.
Fixed Dialling: Start and close of the fixed dialing, and management of the fixed dialing list.

Connection
The items are :
Internet account: Manage internet account, and support the editor and delete.
Data connection settings: Select to connect as needed or all the time.
Network selection: Select to automatically or manually connect.

Profile
The preset modes are Normal mode, Mute mode, Conference mode, Indoor mode, Outdoor mode, Headset mode, and Bluetooth mode. It supports custom profiles, defines at most 5 profiles, and users can set the parameters of the profiles.
Instruction: The preset profiles do not support delete, while the custom profiles support delete.

Additional Function

U Disk Function
U disk is used as follows:
Before using U disk, please confirm your computer is Windows 2000 or Windows XP system.
Link mobile phone to computer with the USB data line provided to the mobile phone. The mobile phone is linked to a computer, select［U disk］at the end of the mobile phone. After the computer successfully identifies the U disk, a green USB equipment small sign will appear on the status bar at the right corner below. Open “My computer”, now see “Removable disc”, and operate U disk. The multi-media files browsed by mobile phone must be saved under designated content before it can be identified, or it can be read or broadcast through mobile phone under other contents. For example, a photo file is readable only under the content of “Photos”.

Note:

1. When the mobile phone is in the status U disk is being used, you can see some default files. Once deleted, the default files in the U disk will be lost forever.
2. After the U disk is used, remove the U disk from the computer first and receive a sign from the system before taking U disk safely, or the data of U disk may be lost or file system of U disk is damaged.
3. Support USB1.1

Maintenance of Mobile Phone
The mobile phone is a high-precision electronic product, so please take good care of it. The following suggestions can help you preserve it and lengthen its useful life:

• Put the mobile phones and their accessories in a place where children are out of reach.
• Keep your mobile phone dry. Rain, moisture, or water may erode the circuit board. If a mobile phone falls into the water carelessly, take the battery out in time and send it to a local authorized service center immediately.
• Please do not put the mobile phone in a dust-covered place or its normal usage will be affected.
• A liquid crystal display is an easily vulnerable part of a mobile phone, try to prevent it from falling down or violently shaken; it is forbidden to use sharp items to touch the screen.
• Please do not put your mobile phone in a place where the temperature is too high. The high temperature will shorten the life of electric equipment, damage the battery, and deform or melt its plastic cover.
• Please do not put the mobile phone in a place where the temperature is too low, or moisture will come out when its temperature increases to normal temperature, it will damage the circuit board of the mobile phone.
• Please do not throw, knock, or forcefully shake the mobile phone to avoid its inner circuit board and precise structure being damaged.
• Please do not clean the mobile or with a chemical agent, cleaning solvent or powerful detergent, instead, clean it lightly with a soft cloth with soap water.
• Please do not draw the mobile phone with painting material to prevent its removable parts from being stuck, which will affect its normal operation.
• Please use a clean soft cloth to clean the lens, such as the camera’s lens.
• When the antenna is replaced, use only supporting or designated antenna. Using unauthorized antennae, or accessories, or reshaping a mobile phone may damage it or violated relevant wireless electric equipment.

Safety Information

Usage Environment
To assure you use your mobile phone reasonably and avoid its effect on you and the environment, please keep in mind relevant regulations and provisions which shall be complied with at any place when you use a mobile phone.
In the places which may give rise to bombs such as gas stations, fuel reservoir, chemical factory, or bombing work, please turn off your mobile phone and abide by all safety marks and instructions there. Any violation of relevant regulations may give rise to bombs and cause casualties.
Using a mobile phone in the plane may disturb the plane’s operation and give rise to danger. Therefore, please do turn off your mobile phone before boarding and make sure it is powered off during the whole course of the flight.
When your drive, please place your mobile phone on a special stand, do not place it on the seat or any place where it may slide when it comes to collision or sudden braking. In the course of driving, please do not use a mobile phone to assure a safe drive and avoid traffic accidents. If you must use a mobile phone, please stop first before using it.
Please keep your mobile phone away from a high-temperature environment to avoid the bomb rising from the increased temperature of the battery.

Medical Equipment
It is expressly stipulated in writing that you shall turn off your mobile phone nearby electric medical equipment (like cardiac pacer maker and hearing aids). Most medical equipment has the function of blocking radio-frequency signals given off by mobile phones, but some electronic equipment doesn’t. if you have any doubt or uncertainty about if medical equipment has the function of blocking radio-frequency signals, please consult doctors or the manufacturer of medical equipment.

PaceMaker
The manufacturer of pacemakers suggests you keep a distance of about 6 feet (15.3 cm) at least between your mobile phone and pacemaker, in order to prevent the mobile phone from causing disturbance to a pacemaker.
Staff wearing pacemakers:
When your mobile phone is powered on, make sure the distance between your mobile phone and pacemaker is about 6 feet (15.3 cm) at least. Please do not put your mobile phone into the pocket in front of your chest. Please receive the call with the ear at the side different from the pacemaker.

Note:
If you suspect any disturbance, please turn off your mobile at once and consult medical staff in time.

Hearing Aids
The mobile phone may disturb some hearing aids, if the disturbance is made, please contact the manufacturer of hearing aids at once.
Emergency Call
The same as other mobile phones, this kind of mobile phone uses a radio signal, wireless and ground communication network, and personal setting function, it can’t guarantee it can get linked successfully under any situation. Please don’t reply on only mobile phone for sending important communication (such as a medical emergency)
Dial emergency call
If your mobile phone is powered off, please turn it on and check if the network signal is strong enough.

• Input the correct local emergency number (like 120 emergency center), the number differs from one district to another.
• Please call by pressing the talking key.

Note:
In case of an emergency call, please try to provide all the important information. The mobile phone may be at the accident site. It is the only conversation tool, please do not end the conversation without approval.

Password Access
The mobile phone and SIM card can be protected by password to prevent them from illegal usage.
Power-on Password
To prevent your mobile phone from being used by others without your approval, you can set a password when you use the function for the first time. After you use your mobile phone, please change the power-on password as soon as possible and keep it a secret.

PIN Code
It is a personal identification number to protect the SIM cards from being used by others without your approval. Usually, PIN codes and SIM cards are provided together. When you use using power-on PIN code, every time when you turn on your mobile phone, you have to input the password before starting the normal phone function.

Note:
If the PIN code is imputed wrong three times successively, the SIM card will be locked. You need to input the PUK code to unlock it. (If no PUK code is available, please contact your network operator or SIM card retailer asking for a PUK code. Please don’t input any character.)

PIN2 Code
PIN2 is the password to realize the special function of the SIM card. If the network operating company provides this number to you, it is to be imputed for getting access to some functions (such as a unit of account, fixed dial numbers, etc.). Usually, the PIN2 numbers and SIM cards are provided together. If you input the PIN2 code wrong three times successively, the PIN2 code will be locked. You need to input the PIN2 code to unlock it.
PUK Code
Unlock the Key PIN code. Usually, the PUK code and SIM card are provided together. If you don’t have one, please contact your network operator or SIM card retailer. If you input the wrong PUK code ten times successively, the SIM card can’t be used anymore. Then please apply to your network operator for a new card. Do not change the PUK code.
PUK2 Code
Unlock the PIN2 code. Usually, the PUK2 code and SIM card are provided together, PUK2 code can alter the locked PIN2code. If the PUK2 number is imputed wrong ten times successively, some functions can’t be used anymore. Then please apply to your network operator for a new card. Do not change the PUK2 code. If it is lost, please contact the service provider.
Attentions on Charging of Battery
This kind of mobile phone provides energy from a lithium-ion battery, system environment, mobile phone settings, and others will affect the waiting and conversation time of the mobile phones. Please use the standard battery and charger provided by the company, or the company isn’t responsible for damage caused by the battery or charger unauthorized by the company. When the mobile phone is powered on, the batty starts to roll on the battery indicator on the screen.

Note:

1. If the battery doesn’t have power at all, the battery indicator will show up after it is charged for 2 to 3 minutes. Generally, according to the current status of the mobile phones (if it is powered on, with the conversation, etc), the charging time is 2 to 5 hours.
2. To make the new battery reach perfect performance, please finish two to three charging and discharging cycles. A new battery shall be charged continuously for above 10 hours for the first time.
   In the course of charging a mobile phone, please do not contact its battery or charger with a wet hand in order to avoid danger.
   When a mobile phone is charged, please do not use it as possible as you can. After the battery is charged full, the electricity indicator stops rolling, then takes the mobile phone out from the port of its adaptor.

Attentions on Use of Battery
The usage of battery is determined by network, settings of mobile phone, usage of mobile phone, take lithium-ion battery with a capacity of 1200 MA, for example, its conversation time is about 6 to 8 hours and standby time is 150 to 240 hours. Please do not use a damaged charged battery. When a mobile phone is used nearby a network base, the battery consumes little electricity. Therefore, conversation and standby time, to great extent, are affected by the signal strength of the cellular network and parameters set by the network operator. The time of charging the battery depends on residual capacity, type of battery, and electronic equipment type. When the usage time of the battery is obviously shortened, you have better change the battery to guarantee the performance of the mobile phone. Please use the standard battery and charger provided by Amoi Company, or it may give rise to a bomb. When you don’t need a charger, please cut off the electricity source. Do not keep the battery linked with the charger for over one week, overcharge will shorten the useful life of the battery. Please do not place the battery by mistaking its cathode and anode. Please do not place the battery in a place where it is too high or too low, or it will decrease the battery’s capacity and life. Please use the battery at domestic temperature as much possible as you can. Do not make the battery short-circuit, or it will damage the battery core or protective circuit inside the battery. When you put the unused battery in a pocket or bag, medal items (coin, pin or pen, etc.) may link two ends of the battery immediately and make the battery short-circuit, so please place the battery singly and safely. Please do not burn the battery of a mobile phone or do it with it as common rubbish. To avoid potential life hazards and harm to the environment, please comply with the environment-friendly policy stipulated by the local government, and treat and recycle batteries in time. If your mobile phone, battery, or other charging equipment fall into the water carelessly, please do not dry it in any heating equipment (such as a drier, or microwave). Mobile phones or other products may give rise to malfunction, and mobile phones, batteries, or other chargers may burn, and expand bombs. Please do with abandoned used battery according to relevant stipulation. Amoi Company isn’t responsible for any direct or indirect loss caused by the above- mentioned wrong operation.

Attention to Use of Accessories
Please put all accessories (such as SIM card, memory card, and battery) in the place where the children are out of reach, to avoid danger. Before taking out the battery of the mobile phone, please make sure the mobile phone is powered off and cut off the linkage between the mobile phone and charger. Accessories of mobile phones don’t have waterproof performance, please keep all accessories dry. When cutting off electricity from any accessory, take out the plug correctly, and do not draw the power cable. If the mobile phone, battery, and charger don’t function normally, please contact the nearest and qualifying maintenance department.

Other Safety Information
When a mobile phone is not used, you’d better turn off the mobile phone and take out the battery in order to save energy and eliminate the radiation of mobile phones.
When a mobile phone is used, please do not adjust its volume too high or it will do harm to hearing Non-professionals shall not take out the terminal and battery of the mobile phone by themselves or themselves. You’d better not use a leather case with a magnetic button as possible you can to avoid magnet which may cause disturbance to signal of powering on or off the mobile phone, and its hard iron the button may damage the fluid crystal display; the plastic case may cause unsmooth evaporation to steam, eroding components inside the mobile phone and oxidizing and discoloring its cover

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>