OLIGHT Obulb Pro Multicolor Light User Manual
- June 5, 2024
- OLIGHT
Table of Contents
Obulb Pro Multicolor Light
User Manual
Thank you for purchasing this Olight product. Please read this manual carefully before use and keep it for future reference!
IN THE BOX
FEATURES
-
7 modes available: Warm white light, red/green/blue light, red flash, fade between 7 colors, and cycle between 7 colors.
-
App control: The Obulb Pro can be controlled by the OLIGHT APP via Bluetooth. With the APP, users can change its mode, brightness, and color, and check the remaining power and runtime. The APP also enables group control and data sharing.
-
Magnetic bottom: The magnetic bottom attaches to almost any smooth surface when combined with the adhesive metal badge.
-
Larger Battery: The built-in 1650mAh battery allows up to 84 hours of runtime.
Magnetic charging: With the magnetic charging cable, it can be fully charged in 3 hours. -
One-button operation: Single click the rubber-coated button to switch on the Obulb Pro and cycle through 7 light modes, or long-press to turn it off.
-
Suitable size: Measuring 3.7oz and 2.56*2.28in, this light orb is bigger to light a larger area, but still compact enough to be carried by hand or in backpacks.
-
Sturdy build: IPX7 waterproof and 1.5-meter impact-resistant, the Obulb Pro is ready for any environment and adventure.
-
Heat dissipation design: The hidden heat dissipation hole prevents distortion caused by overheating.
SPECIFICATIONS
MODE| |
---|---|---
WHITE LIGHT(HIGH)| 240 lumens| 2.5h
WHITE LIGHT(LOW)| 4.5lumens| 84h
COLOR LIGHTS| —| 17h
| |
OPERATING TEMPERATURE| 0℃ ~ 40℃|
STORAGE TEMPERATURE| -20℃ ~ 60℃|
- All data above are test results according to ANSI/NEMA FL 1-2009 standards.
- The tests are performed using the built-in battery that is fully charged.
PRODUCT OVERVIEW
UNLOCK THE LIGHT BEFORE FIRST USE
NOTE:
- When the charging cable is connected for the first time, it is normal that the indicator of the cable to flash red once or twice to signal to charge cable detection.
CHARGING
- Before the first use please fully charge the product.
- Connect the USB end of the magnetic charging cable (MCC 1A) to an external USB power source, then attach the other end of the cable to the charging port at the bottom of the product. It takes 3 hours to fully charge.
- Charged at 4.2V/max 1A.
- The red indicator means charging, while the green indicator means charging completed.
WARNING
Input voltage higher than 5V or voltage fluctuation may damage the IC, leading
to short-circuit and even melting of the charging interface.
BATTERY TYPE
- Built-in 1650mAh 3.7V Rechargeable Lithium Polymer Battery.
HOW TO USE THE ADHESIVE METAL BADGE
- Clean and dry the paste position.
- Gently and carefully peel out the protective film and DO NOT touch the sticky side.
- Paste the sticky side of the adhesive metal badge onto the desired position and press it evenly until it is fixed in place.
- Attach the Obulb Pro to the adhesive metal badge.
DANGER
- DO NOT drop the light or impact it heavily to protect the built-in battery.
- DO NOT charge the product with non-designated power adapters. It may cause battery combustion or even explosion.
- DO NOT throw the product into the fire, which may cause battery combustion, explosion, or unexpected disasters.
WARNING
- DO NOT charge the product if it becomes dirty or wet. Before charging, please clean and dry it.
- DO NOT let a pet play with it, in case the pet will bite and damage it.
- DO NOT hit it as a ball, which may cause irreversible damage.
- DO NOT use it as a baby toy.
- DO NOT use it at 60℃ or a higher temperature. Otherwise, it may be damaged or distorted.
- DO NOT disassemble or modify the battery, or use the battery for other purposes.
NOTICE
-
When the light is turned off, the current output mode will be memorized for the next activation.
-
The output brightness will decrease as the battery runs low and its voltage decreases until the light goes off.
-
The product can be charged with an MCC3 charging cable, but the charging indicator may not work properly if doing so.
-
The battery has a thermal protection feature. When the battery is working at a temperature higher than 40℃, the Obulb Pro may not be charged.
-
When the product has been fully charged with an MCC1A charging cable, the charging will stop.
Once the battery level drops below 95%, the charging will restart. -
Only two Obulb Pro should be charged on the Omino at a time.
-
The Obulb Pro does not support Night our control.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual, including
but not limited to using the product inconsistent with the recommended lockout
mode.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following
MEASURES:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC (IC) RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC (IC) radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator & your body.
EU-DECLARATION OF CONFORMITY
EU-Declaration of Conformity can be found here: https://olightworld.com/ec-
declaration
USA Customer Support
[email protected]
Global Customer Support
[email protected]
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town,
Dongguan City, Guangdong, China.
Made in China
THANK YOU!
Documents / Resources
|
OLIGHT Obulb Pro Multicolor
Light
[pdf] User Manual
Obulb Pro, Multicolor Light, Obulb Pro Multicolor Light
---|---
|
OLIGHT Obulb Pro Multicolor
Light
[pdf] User Manual
Obulb Pro Multicolor Light, Obulb Pro, Multicolor Light, Light
|
OLIGHT Obulb
Pro
[pdf] User Manual
Obulb Pro, Obulb
References
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight