STACK-ON GC-910-5 Home Security Cabinet Installation Guide

June 7, 2024
STACK-ON

STACK-ON GC-910-5 Home Security Cabinet Installation Guide
STACK-ON GC-910-5 Home Security Cabinet

IMPORTANT

Record the serial and key numbers from the back of the cabinet. You will need the serial number information in order to replace lost keys.

Do not store this document in your security cabinet. Keep keys in a secure place away from children.

NOTE: Assemble shelves before mounting the cabinet to a wall or floor. Exterior access is required for assembly. Review these instructions prior to installation.

Tools Required:

  1. Phillips screwdriver
    screwdriver

  2. 7/16″ wrench
    Wrench

  3. Drill with 3/16″ bit
    Drill

MODEL GC-910-5

INSTALLATION OF BARREL RESTS AND SHELF

Installation of Barrel Rests

Measure and mark the locations of the barrel rests on the innner sides of the cabinet using the dimension shown. (See figure 1)
Dimension
To install the barrel rests to the cabinet, first remove the backing from the foam rests. For help in doing this, pinch the end of the foam to help secure the adhesive to the foam. Attach the barrel rests to the inner sides of the cabinet as shown.

Shelf Assembly

Assemble the shelf inside the cabinet with (4) 10-32 nuts and bolts as shown. (See figure 1) Place the bottom pad (A) in the bottom of the cabinet.

CABINET MOUNTING INSTRUCTIONS

Selecting a Location

Your Security Cabinet should be installed in an isolated, dry and secure area.

For greater security the cabinet must be fastened to a solid surface with a minimum space on either side. Ideally the cabinet would be installed on the side wall of a closet.(See figure 2)
CABINET MOUNTING

The cabinet should be flat against the wall and floor. Remove the baseboard if necessary. (See figure 3)

Insert the plastic plugs in the cabinet’s top mounting holes if you are not installing the Pistol-Ammo cabinet on the top of the security cabinet.

Wall Mount Option

The (4) mounting holes in the rear of the cabinet must line up with the 16″ centers of the wall studs. Drill new holes in the cabinet if necessary. (See figure 3)
Wall Mount

Drill (4) 3/16″ pilot holes into the wall studs and secure the cabinet to the wall using (4 ea.) lag bolts and washers. (See figure 3)

Floor Mount Option

The (4) mounting holes in the rear of the cabinet must line up with the 16″ centers of the wall studs. Drill new holes if necessary. (See figure 3)

Drill (2) 3/16″ pilot holes into the wall studs lining up with the top (2) mounting holes in the back of the cabinet. Secure the cabinet to the wall using (2) lag bolts and washers.

Drill (2) pilot holes and secure the cabinet bottom to the floor with (2) lag bolts and washers.

MODEL GC-500-5

PISTOL-AMMO CABINET ASSEMBLY

IMPORTANT: Install the shelf before mounting the cabinet to a wall. Install shelf with (4) 10-32 nuts and bolts. (See figure 4) Place foam pad in bottom of cabinet. Insert the plastic plugs in the cabinet’s top mounting holes.

CABINET ASSEMBLY

INSTALLATION OF GC-500-5 PISTOL-AMMO CABINET ON TOP OF SECURITY CABINET

NOTE: We recommend that security cabinet be installed as described above.
IMPORTANT: Install the shelf before mounting the cabinet to a wall. Remove the top hole plugs from the cabinet by pushing out from the inside of the cabinet. Place the GC-500-5 on top and assemble with (2) 1/4-20 nuts and bolts. Do not tighten bolts. (See figure 5)
Installation of GC-500-5

Drill (4) 3/16″ pilot holes into the wall studs and secure the GC-500-5 cabinet to the wall using (2) lag bolts and washers. (See figure 5) Tighten the (2) bolts that connect the cabinets.

IMPORTANT

Keep keys away from children. Keep this record of your serial and key numbers in a secure place separate from your security cabinet. If you lose your keys you will need this information as a reference for obtaining new keys. To order a replacement key set, follow the instructions on the attached form.

STACK-ON PRODUCTS COMPANY P. O. BOX 489 WAUCONDA, IL 60084

Security Cabinets and Safes Key or Combination Request

“This is not a Registration Form”

Verification of ownership is required in order to receive replacement key or confirm your combination on your security product.

In order to receive a replacement key or obtain the combination to your security product:

  1. Complete the following form and send to Stack-On Products.
  2. Send a copy of your valid driver’s license along with the form.
  3. Send a copy of the receipt showing the original purchase.
  4. Security product owner must sign form.
  5. Owner’s signature must be notarized.
  6. Send $10.00 for replacement key or combination. Personal Check, MasterCard, or Visa accepted.
  7. Send completed information to:
    Stack-On Products Company 1360 N. Old Rand Road
    P.O. box 489 Wauconda, IL 60084

Serial Number____Key Number (if applicable)____

Unit Dimensions__

Unit Description___

Owner’s Name ___ Date Purchased_/_/__

Owner’s Address ___ Unit or Apt Number _

City ____ State Zip Code____

Telephone Number: ()____ Fax Number: (__)___

Owner’s Email Address: __

Owner’s Signature ___Notary Signature____

Notary Commission Expires: //____ Notary Stamp

SERVICE REQUESTED

Combination confirmation: Yes No
$10.00 charge for this service

Key Replacement: Yes No
$10.00 charge for this service

Credit Card Information (Please circle one) MasterCard Visa

Expiration Date: //_ Card Number:____

Credit Card Identification Number (Located on back of card, last 3 digits on signature strip)_____

LIMITED ONE YEAR WARRANTY SECURITY PLUS STEEL CABINETS AND PISTOL BOXES

Stack-On Products Co. (“Stack-On”) Security Plus Steel Cabinets and Pistol Boxes, are warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase by a consumer. This warranty extends to the initial consumer only.

If you believe there is a defect in material or workmanship in your Security Plus Steel Cabinet or Pistol Box, during the one-year warranty period, please contact our customer service department, by regular mail or email at the address listed below, and include with your correspondence proof of purchase information and the model number of the product.

Stack-On Products Company
1360 North Old Rand Road
Wauconda, IL 60084
customerservice@stack-on.com

If Stack-On is properly notified during the one-year warranty period and, after inspection confirms there is a defect, Stack-On will, at its sole option, provide repair parts or exchange the product at no charge, or refund the purchase price of the product.

THIS WARRANTY DOES NOT COVER ANY PRODUCT, OR ANY PART OF ANY PRODUCT, WHICH HAS BEEN SUBJECT TO EXCESSIVE USE, ACCIDENT, NEGLIGENCE, ABUSE OR MISUSE, INCORRECT MAINTENANCE, ALTERATION OR REPAIR BY ANYONE OTHER THAN STACK-ON. IN ADDITION, THIS WARRANTY DOES NOT COVER ANY ACCESSORIES OR PARTS USED WITH OR IN THE PRODUCT, WHICH ARE NOT INCLUDED WITH THE ORIGINAL PURCHASE.

THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY  DISCLAIMED AND EXCLUDED. STACK-ON SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES. STACK-ON NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF STACK-ON’S SECURITY PLUS STEEL CABINET OR PISTOL BOX.

STACK-ON WILL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO THE INITIAL CONSUMER FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL,EXEMPLARY, OR PUNITIVE DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ANY STACK-ON SECURITY PLUS STEEL CABINET OR PISTOL BOX.

STACK-ON’S LIABILITY FOR ANY BREACH OF THIS WARRANTY SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT, AS DESCRIBED ABOVE, OR A REFUND OF THE PURCHASE PRICE OF THE PRODUCT.

IN NO EVENT SHALL STACK-ON’S OBLIGATION UNDER THIS WARRANTY EXCEED THE PRICE OF THE PRODUCT.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals