HUSKY 51611 Floor Liner Instruction Manual
- June 13, 2024
- Husky
Table of Contents
X-ACT CONTOUR®
FLOOR LINERS
PT #51611
CARE AND USE INSTRUCTIONS
Thank you for selecting an X-act Contour® Floor Liner from Husky Liners. Your
new front floor liners are custom molded to fit your specific vehicle. The
liners are made to take the place of your factory floor mats. For correct fit,
it is necessary to remove the factory floor mats before installing your new
floor liner. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and
extremely tough and durable. The easiest way to clean your liners is with a
damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use
of Armor All® , Son-of-a-Gun® or similar items is discouraged as these
products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR CUSTOM MOLDED FRONT FLOOR LINERS
TO EASE INSTALLATION OF YOUR FRONT LINERS, MOVE BOTH FRONT SEATS TO THEIR MOST REARWARD POSITION. NEXT, REMOVE ANY EXISTING FLOOR MATS AND INSTALL THE LINERS, POSITIONED AS SHOWN ABOVE. TAKE CARE THAT THE LINERS ARE SECURED TO THE FACTORY FLOOR MAT RETENTION VELCRO INSERTS. ONCE THE LINERS ARE INSTALLED, MOVE THE FRONT SEATS TO THEIR DESIRED LOCATIONS.
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-
warranty
5161 X-act Contour Front Floor Liner.docx
6_13_2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>