Reveal K Series Boy Cameras User Guide

: June 3, 2024
: Reveal

Table of Contents

Reveal K Series Boy Cameras
Basic Functions
Recording
Playback
SIM Card Insertion (K7 only)
Mounting
Camera head articulation
Camera head Locking
Technical Specifications
Notifications
Product conformance
FCC statement
Battery Safety and Storage
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Reveal K Series Boy Cameras

Basic Functions

$Reveal-K-Series-Boy-Cameras- $1$$

Button Functionality

Recording

$Reveal-K-Series-Boy-Cameras- $3$$

Button Functionality

Screen Data

A. Current date
B. Recording indicator {red)
C. Current time
D. Remaining storage
E. Recording resolution
F. Elapsed recording time
G. Battery charge
H. Audio mute indicator
I. Important indicator

Playback

$Reveal-K-Series-Boy-Cameras- $5$$

Button Functionality

Screen Data

A	File number/ File total
B	Date of recording
C	Time of recording
D	Battery charge
E	Volume level: 0 – 10
F	Playback/ Total time
G	Playback speed: x1 x4 x16 x64
H	Incident ID & Notes field
I	Cloaked indicator
J	Retention policy dropdown

SIM Card Insertion (K7 only)

Remove the two fixing screws from the SIM card cover using the tool provided.
Insert the SIM card as per the illustration.
3} Fix the SIM card cover back in place. Ensuring the screws are tightened to maintain waterproofing.

Mounting

The K-Series camera has several mounting options including:

Screw in Klick Fast stud (pre-attached}
Crocodile clip (supplied in the box}
Lanyard (supplied in the box}

Guidance for camera mounting can be found on the: Reveal Website: https://www.revealmedia.co.uk/support

Camera head articulation

The K-Series camera head is able to rotate 308° horizontally and 177° vertically allowing the camera to be worn in various places on people of all shapes and sizes, or head mounted on a helmet or cap.
DO NOT OVER ROTATE!
The K-Series camera head does not rotate 360° and attempting to do so will cause damage.

Camera head Locking

$Reveal-K-Series-Boy-Cameras- $12$$

It is possible to lock the K-Series camera head into 1 of 4 vertical and 1 of 3 horizontal positions. This procedure requires K-Series camera head locking screws, available from your Reveal contact.

Remove the two rubber bungs to expose the screw holes.
Adjust the camera head into the desired position, using the arrow marks to align the screw holes.
Insert the screws and tighten There is no need to re-insert the rubber bungs.

Technical Specifications

Dimensions	H: 113.5mm W: 63mm D: 28mm
LCD display	2.83″ VGA (480×640 pixels)

Touch screen, with dimmable backlight

50-60 Degrees (Vertical)

(Non-removable)

Temperature range| Storage: -20°C to 50°C (-4°F to 122°F) Operating: -20°C to 50°C (-4°F to 122°F) Charging: +10°C to 30°C (50°F to 86°F)

Notifications

Product conformance

How to recycle your equipment
The symbol shown here and on the packaging means that the product is classed as electrical or electronic equipment, so DO NOT put it in your normal garbage bin.

It’s all part of the Waste Electrical and Electronic Equipment (WEEE) directive to recycle products in the best way, and get rid of dangerous things more safely. You should contact your retailer, supplier, or local city office for advice on how to dispose of this product in an environmentally friendly way.

Reduction of hazardous substances
This product is compliant with the EU Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Regulation (Regulation No 1907/2006/EC) and the EU Restriction of Hazardous Substances (RoHS) Directive (Directive 2011/65/EU).

Radio Equipment Directive (RED)
The K-Series product is compliant with the requirements of the Radio Equipment Directive (2014/53/EU).

FCC statement

The K-Series complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The K-Series has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SAR Safety
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body with a minimum separation distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
This product is compliance to FCC RF Exposure requirements and refers to FCC website
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AL26-K6 and FCC ID: 2AL26-K7
All transmission frequencies of U-Nll-1,U-Nll-2A,U-Nll-2C and
U-Nll-3 comply with 47 CFR FCC Part15.407(g) and the manufacturer declares that their transmission is maintained within the U-Nll-1, U-Nll-2A,U-Nll-2C and U-Nll-3 bands.

Battery Safety and Storage

Battery safety
Reveal’s body cameras use lithium Ion batteries which are common in most portable devices such as radios and mobile phones. Reveal’s cameras are safety tested with the appropriate certification.
Damage to a lithium Ion battery can cause excessive heat build-up often associated by an audible “hissing” sound, smoke and, in extreme cases, combustion. The K-Series casing provides a significant degree of battery protection, however, if the case becomes punctured or crushed by excessive forces, then there is a risk of battery damage. Therefore, we recommend that the user of cameras performs a risk assessment as to the role of the wearer and likelihood of excessive trauma to the camera.
If a camera becomes excessively hot or emits any unusual sounds or smoke then:

Immediately detach the camera and place in a safe area.
Do not charge the camera.
Contact Reveal Support.

Storage
Store in dry place, away from direct sunlight and sources of heat, at a temperature between -20°C and 50°C (-4° F to 122° F).
Lithium ion battery discharge naturally over extended periods of time and if not charged for prolonged periods of time, may deteriorate resulting in reduced performance and failure.
If your K-Series camera is kept in long-term storage it should be charged to at least 50% of full charge every six months. Your warranty may be invalidated if you fail to recharge your battery regularly or to follow other instructions for the storage, installation, commissioning, use or maintenance of the camera.