VISUAL COMFORT CHA8969 Small Ring Table Lamp Instructions
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CHA8969 Small Ring Table Lamp
Product Information
- Product Name: Small Ring Table Lamp
- Model Number: CHA8969
- Compatibility: ALB & CG Version, Metal Version
- Bulb Type: Not included
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Important Notice: This light fixture should be installed in accordance with
all applicable, local installation codes, and by a person familiar with the
construction and operation of it, as well as the hazards involved. Inspect
item and contents carefully. If
any damage or defect is found, do not install. Retain all packaging material
until installation is complete and approved.
Product Usage Instructions – ALB & CG Version
- Tools Required (Not Included): Scissors
- Carefully remove all parts from the box. Place on a clean, soft surface.
- Install the harp (C) by squeezing it together and inserting it into the top of the saddle (D).
- Remove the finial (A) from the harp (C).
- Remove the shade (B) from packaging and install it to the harp (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
- Install the light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
Product Usage Instructions – Metal Version
-
Tools Required (Not Included): Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install the harp (C) by squeezing it together and inserting it
into the top of the saddle (D). -
Remove the finial (A) from the harp (C).
-
Remove the shade (B) from packaging and install it to the harp (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
-
Install the light bulb into the socket.
-
Remove the protective cover (E) from the plug.
-
Plug the lamp into an electrical outlet and test the fixture.