SCOSCHE UAKP4G Kwik Plug 4 AWG Universal Quick Disconnect Power Plug User Guide
- June 5, 2024
- Scosche
Table of Contents
UAKP4G
Kwik Plug
4 AWG Universal Quick Disconnect Power Plug
PRELIMINARY INTRODUCTION
The Kwik Plug is a quick-release power connection for your amplifiers and active bass enclosures. The high-quality ABS plastic and gold-plated terminals allow the Kwik Plug to be extremely durable and hard-wearing. Works with most cables up to 4 AWG.
INTRODUCTION
Use the provided 3mm or 1.5mm hex wrench loosen the hex screws on the Kwik Plug and make the necessary connections. Ensure that the connection marked AMPLIFIERS is connected to the amplifier and that the side marked POWER is connected to the power source. Once properly wired, tighten the hex screws then connect both of the Kwik Plug connections together. Note: Amplifier wires not included.
TECH SUPPORT !
If you have any questions or need technical assistance with the installation, or the most current application please call or visit us on the web at: 800-363-4490 x1 I www.scosche.com/contact
©2021 SCOSCHE INDUSTRIES INC.
UAKP / UAKP4G 07/21
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>