MOMENTO M7 Three Channel Car Dash Camera User Guide
- June 5, 2024
- MOMENTO
Table of Contents
MOMENTO M7 Three Channel Car Dash Camera User Guide
Package Components
- Please do not access this device while driving. It is extremely dangerous and LCD layout isn’t intended for use while driving.
- MOMENTO is not responsible for any data loss and will not compensate for any loss. Also, based on the user’s setting and environment, please be informed that the device may NOT record videos of all accidents.
- The device and the recorded videos are intended for reference and personal use only.
Product Overview
Mark | Description |
---|---|
① Mount | Installation mount with GPS |
② LED | Security LED (white) |
③ Camera Lens | Front camera for video recording |
④ Speaker | Voice guidance |
⑤ MIC | Microphone for voice and audio recording |
⑥ Power | Power ON/OFF switch |
⑦ Micro SD | Memory card slot |
⑧ CAM1 | External camera 1 port |
⑨ CAM2 | External camera 2 port |
⑩ DC-IN | Power cable port |
⑪ Tightening Knob | Angle adjustment of the camera |
⑫ LCD | LCD touch screen |
Device Installation
Caution
- Make sure to install the device in a safe area and that the engine is OFF.
- Please check if the Micro SD card is inserted correctly before connecting to power.
- Make sure the installation area is clean.
- Disconnect the power cable if you are not using the device for a long period of time.
- The power cable on the mount must be unplugged before installing or detaching.
Caution when inserting Micro SD card
- Do not apply excessive force on the Micro SD card or insert in the wrong direction. Any actions which may cause an SD card error, will be the responsibility of the user.
- Make sure the device is turned off when you pull out the SD card.
Camera installation
- Select and clean the area where the product will be installed.
- Remove the double-sided tape and press firmly onto the cleaned area.
- Connect the main camera and the mount.
- Connect the angled end of the cable to the rear camera and use the straight end of the cable to connect to either Cam 1 or Cam 2 of the camera mount.
- Connect the power cable & remove a sticker from each camera lens.
To avoid interrupted reception with other devices such as a navigation, make sure the wiring is not overlapped with enough space in between.
Connecting Hardwire Cable
BLACK : GND
YELLOW : BAT (B+)
RED : ACC
Please visit a professional installer to connect hardwire cable.
Using Dashcam Application
Live View
No | Description |
---|---|
① | Real-time driving video |
② | Home Menu |
③ | Microphone On/Off |
④ | Voice Guidance On/Off |
⑤ | Vehicle’s battery status |
⑥ | Date |
⑦ | Time |
⑧ | Manual Recording |
⑨ | Camera View Selection |
Home Menu
No | Description |
---|---|
① | Back to Live View |
② | Recorded Video Files |
③ | Memory, Camera & System Settings |
File List
You can check the recorded video through the file list menu below.
No | Description |
---|---|
① | Back to the Previous Menu |
② | Driving Recordings |
③ | Driving Event Recordings |
④ | Parking Recordings |
⑤ | Parking Event Recording |
⑥ | Manual Recordings |
Playback
No | Description |
---|---|
① | Recording Mode Icon |
② | Video File (Date / Time) |
③ | Video File Navigation |
④ | Camera Selection |
⑤ | View Previous Recording |
⑥ | Rewind 5 seconds |
⑦ | Play or pause video |
⑧ | Fast-forward 5 seconds |
⑨ | View Next Recording |
Settings
Memory
No | Description |
---|---|
① | SD Card Settings |
② | Camera Settings |
③ | System Settings |
④ | Parking Mode Capacity Selection |
⑤ | SD Card Format |
Camera
No | Description |
---|---|
① | Select Parking Mode: Eco On (Radar), Eco Off (Camera Motion), Off |
② | A range of 0~5 level ( 0 is Off) |
③ | A range of 0~3 level ( 0 is Off) |
*Motion Sensitivity will be automatically turned off in Eco Parking Mod e
④| LCD operation mode during idle status: Live View, Clock, Off
System
Power Saver & MIC & Speak & LED
No | Description |
---|---|
① | Low Voltage Camera Shutoff in Parking Mode |
② | Microphone On/Off |
③ | Speaker Volume |
④ | Security LED On/Off |
Time Zone
No | Description |
---|---|
① | Adjust Date/Time Manually |
② | Daylight Saving On/Off |
③ | Time Zone Selection (If Manual |
mode enabled)
Manual Time Settings
No | Description |
---|---|
① | Select date or time settings. |
② | Manual settings for date. |
③ | Manual settings for time. |
④ | Click [Back] to apply the changes. |
System Secret Mode
The Secret Mode, when enabled, encrypts the dash cam and requires a password to view settings or video files.
No | Description |
---|---|
① | Secret Mode On/Off |
② | Set the secret mode password. |
③ | Select mph or km/h |
System information
No | Description |
---|---|
① | Select English or French |
② | Displays System Settings and Firmware Version |
③ | Reset to Factory Settings |
Software Update
Do not turn the product off or remove the memory card while the firmware update is in progress. The stored software may be lost or the product may malfunction.
-
Remove the memory card with the dash cam turned off.
-
Insert the memory card into the memory card reader connected to the PC.
-
Copy firmware for upgrade to the root of the micro SD card
-
Remove the memory card from the memory card reader connected to the PC.
-
Insert the memory card into the product’s memory card slot.
-
Turn on the vehicle (ACC ON) or start the engine to turn on the dash cam.
The firmware upgrade will run automatically. When the firmware upgrade is completed normally, the product will automatically turn off and then on again. -
The firmware upgrade is complete.
PC Viewer
Download M7 PC Viewer
Open the Internet browser then download the PC Viewer on the
following link in below. https://momentocam.com/resources
PC Viewer Compatibility
The PC Viewer is compatible for both Windows and Mac OS Computers.
PC Viewer Manual
Open the Internet browser then download the manual on the
following link in below.
https://momentocam.com/resources
Specifications
Item | Description |
---|---|
Micro SD Card Capacity | Up to 256GB |
Camera FOV
| Front| 135°(D) x 113°(H) x 61°(V)
Rear| 146°(D) x 116°(H) x 62°(V)
ECO Mode Operation| 24GHz Radar Sensor Motion detection
GNSS Support| GPS, BEIDOU Built-In Support
Input Power Source| DC 12V / 24V
Operation Temperature| -20°C ~ +60°C
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>