Gude HLG 650-2000 LCD Hot Air Blower Instruction Manual
- June 5, 2024
- Gude
Table of Contents
HLG 650-2000 LCD Hot Air Blower
Instruction Manual
DELIVERY RANGE
Operation
Technical Data
| Hot air blower | HLG 650-2000 LCD |
|---|---|
| Art. No | 58121 |
| Service connection | 230 V ~ 50 Hz |
| Rated input | 2000 W |
Air volume
Level 1
Level 2| 250 – 500 l/min
250 – 500 l/min
Air temperature
Level 1
Level 2| 50 °C
50 – 650 °C
Weight| 0,9 kg
Read and understand the operating instructions before using the appliance.
Familiarise yourself with the control elements and how to use the appliance
properly. Abide by all the safety measures stated in the service manual. Act
responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception
includes youngsters trained in order to reach knowledge under the supervision
of the trainer during occupational education.
In case of any doubts about connection and operation refer please to our
customer center
WARNING Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
Safety Warnings Hot air blower
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
The danger of fire if not used properly! Take care if using the device in the
vicinity of combustible materials.
Do not direct the device towards the same place for long periods. Do not use
the device in rooms with a potentially explosive atmosphere.
Do not use the device in rooms in which easily flammable material or gases may
be present.
Heat can be conducted to combustible materials that are concealed.
Do not leave the device unattended while switched on.
Do not use the device outside if it is raining. Never cover or close the hot
air nozzle.
Do not point the hot air flow at people.
Do not use the device as a hair dryer. Allow the device to cool down for a
while after use before packing it away.
Specified Conditions Of Use
The device is suitable for soldering copper pipes, galvanizing bodywork parts,
welding plastics, thawing out water pipes or heating metal parts.
Do not use this product in any other way as stated for normal use. Not
observing general regulations in force and instructions from this manual does
not make the manufacturer liable for damages.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified
medical attendance as quickly as possible. Protect the injured person from
further harm and calm them down. If you seek help, state the following pieces
of information:
- Accident site,
- Accident type,
- Number of injured persons,
- Injury type(s)
Symbols
| WARNING / Caution!
---|---
| Read the operating instructions to reduce the risk of injury.
| Wear eye protective goggles!
Wear ear protectors!
| Wear gloves!
| Unplug the machine before any work on it.
| WARNING! Danger of burns
| Class II tool.
| CE marking
| Any damaged or disposed of electric or electronic devices must be delivered
to appropriate collection centers.
Mains Connection
Operation is only allowed with a safety switch against stray current (RCD
max. stray current of 30mA).
Connect only to single-phase AC system voltage as indicated on the rating
plate. It is also possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
Only plug in when the machine is switched off.
Maintenance
Unplug the machine before any work on it.
Repairs and works specified in these Instructions may only be performed by
qualified authorized staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all times. Never spray
water on the device’s body!
Do not clean the plastics with solvents, flammable or toxic fluids. For
cleaning, use a damp cloth only.
Caution! If the power cord of the appliance gets damaged, it must be replaced
by the manufacturer or its customer service or a similarly qualified person to
avoid danger.
Only a regularly maintained and treated appliance can serve as a satisfactory
aid. Insufficient maintenance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at
www.guede.com.
Hot air blower
Appropriate EU Directives
Harmonized standards used
EN 62233:2008
EN 60335-2-45:2002+A1:08+A2:12
EN 60335-1:2012 ; ZEK01.04-08
EN 55014-1:2006/+A1:2009/+A2:2011
EN 55014-2:1997/+A1:2001/+A2:2008
EN 61000-3-2:2006/+A1:2009/+A2:2009
EN 61000-3-3:2013
Guaranteed sound power level: LWA dB (A)
Measured sound power level: LWA dB (A)
Managing Director
Joachim Bürkle
GÜDE GmbH & Co. KG, Birkichstraße 6, 74549 Wolpertshausen, Germany
Authorized to compile the technical file
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail: info@guede.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>