LIGHT BRICKS 75328 MANDALORIAN HELMET LIGHT KIT Installation Guide
- June 5, 2024
- LIGHT BRICKS
Table of Contents
75328 MANDALORIAN HELMET LIGHT KIT
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT
INSTALLATION GUIDE
Light My Bricks
LEGO THE MANDALORIAN HELMET 75328 INSTALLATION GUIDE
Hi There! We’re here to help you get started on the LEGO The Mandalorian
Helmet 75328 Light Kit. This PDF details the instructions for the LED light
kit only. If you run into any issues, please refer to the troubleshoot-ing
section towards the end of this guide. Have fun and enjoy!
INSTALLATION GUIDE
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE 2
v
PACKAGE CONTENTS:
1x Blue Large 30cm Bit Light 1x Cool White 30cm Bit Light 3x Cool White Large
30cm Bit Light
1x 6-Port Expansion Boards
1x USB Power Cable (Power Source not Included)
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
ASSORTED BRICKS:
· 1x Plate 2×2 W Rounded Bottom – Trans Clear · 1x Plate 1×1 – Trans Clear ·
1x Plate 1×2 MW Stud Jumper – Black · 2x Plate 1×6 – Black · 2x Tile 1×1 W
Clip Round Edges – Black · 2x Round Brick 1×1 – Black · 2x Arm Skeleton, Bent
with Clips (Horizontal Grip) – Black · 4x Round Plate 1×1 Open Stud – Black ·
6x Plate 1×1 Mod Rounded w Handle – Black
PACKAGE CONTENTS
3
Contents
Before You Begin
5
Blueprint
8
Instructions
9
Final Product
23
Troubleshooting
24
Contact
29
CONTENTS
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE 4
Before You Begin
Laying cables in between and underneath bricks
Cables can fit in between and underneath LEGO bricks, plates, and tiles
providing they are laid correctly between the LEGO studs. Do NOT forcefully
join LEGO together around cables; instead ensure they are laying comfortably
in between each stud. CAUTION: Forcing LEGO to connect over a cable can result
in damaging the cable and light.
BEFORE YOU BEGIN
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Connecting Cable Connectors To Expansion Boards
Take extra care when inserting connectors to ports of Expansion Boards.
Connectors can be inserted only one way. With the expansion board facing up,
look for the soldered “=” symbol on the left side of the port. The connector
side with the wires exposed should be facing toward the soldered “=” symbol as
you insert into the port. If a plug won’t fit easily into a port connector, do
not force it. Incorrectly inserting the connector can result in bent pins
inside the port or possible overheating of the expansion board when connected.
5
Before You Begin
Connecting Cable Connectors To Strip Lights
Take extra care when inserting connectors to ports on the Strip Lights.
Connectors can be inserted only one way. With the Strip Light facing up,
ensure the side of the connector with the wires exposed is facing down. If a
plug won’t fit easily into a port connector, don’t force it. Doing so will
damage the plug and the connector.
BEFORE YOU BEGIN
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Connecting Micro Cable Connectors To Micro Expansion Board Ports
Take extra care when inserting the micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is
similar to connecting lights and cables to Strip Lights. With the expansion
board facing up, ensure the side of the connector with the wires exposed is
facing down. If a plug won’t fit easily into a port connector, do not force
it. Use your fingernail to push the plastic part of the connector to the micro
port.
6
Before You Begin
Installing Bit Lights Under Lego® Bricks And Plates
When installing Bit Lights under LEGO pieces, ensure they are placed the
correct way up (Yellow LED component exposed). You can either place them
directly on top of LEGO studs or in between.
BEFORE YOU BEGIN
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE 7
BLUEPRINT
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
8
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
To ensure a smooth installation of your light kit, please read and follow each
step carefully. If you run into any issues, please refer to the online
troubleshooting guide.
LEGEND: LEGENDE: LÉGENDE: LEGGENDA:
DISCONNECT TRENNEN DÉCONNECTER SCOLLEGARE
INSTRUCTIONS
CONNECT / RECONNECT VERNINDEN / WIEDERVERBINDEN CONNECTER / RECONNECTER CONNETTI / RICONNETTI
TURN / FLIP WENDEN / KIPPEN TOUR / INCLINAISON ROTARE / INCLINARE
DIRECTIONAL DIRECTIONAL DIRECTIONNEL DIREZIONALE
TWIST / BRAID DREHEN / VERDREHEN TORSION / TRESSER TWIST / TRECCIA
POWER ON / TEST EINSCHALTEN / TESTEN POWER ON / TEST POWER ON / TEST
9
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
1
Use the LEGO Brick Separator Tool
to help pry off parts
2x Plate 1×6 – Black
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
10
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Black 1×1 Plate Modified Plate Rounded w/ Handle
2
Black Round Plate 1×1 w/ Open Stud
Cool White Large 30cm Bit Light
Black Arm Skeleton, Bent w Clips (Horizontal Grips)
Black 1×1 Plate Modified Plate Rounded w/ Handle
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
11
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
x2
3
Blue Large 30cm Bit Light
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
12
Plate 2×2 W Rounded Bottom Trans Clear
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
4
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
13
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Plate 1×8 – Black
Grab the cables from the left spotlight and the usb power
USB Power Cable
5
Grab the cables from the sign and right spotlight
Pull the USB Power Cable up but leave some below
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
14
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
6
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
15
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Black 1×1 Plate Modified Plate Rounded w/ Handle
7
Black Round Plate 1×1 w/ Open Stud
Cool White Large 30cm Bit Light
Tile 1×1 W Clip Round Edges Black
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
16
Plate 1×2 MW Stud Jumper Black
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE 6-Port Expansion Board
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
17
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
8
Round Brick 1×1 – Black
Black 1×1 Plate Modified Plate Rounded w/ Handle
Cool White 30cm Bit Light
Round Plate 1×1 – Trans Clear
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
18
Round Brick 1×1 – Black
Black Round Plate 1×1 w/ Open Stud
Tile 1×1 W Clip Round Edges Black
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
19
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
9
Lift the head and lightly pull the cables through as you place it down
Lay the head on the stand without connecting it
Lightly pull the USB Power Cable as far as it can go without it pulling the 6-Port expansion board out of the head cavity
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
20
Reconnect the head to the stand and ensure the cables are in the positions
shown
10
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Tilt the faceplates out as far as they go to make the light inside more
visible
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
21
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
If you experience any issues with the lights not working and suspect an issue
with a component, please try a different port on the expansion board to verify
where the fault lies (with the light or expansion board). To correct any
issues with expansion board ports, please view the section addressing
expansion board issues in our troubleshooting section.
Connect the other end to a USB Power Bank, USB Wall Adaptor, or USB to AA
Battery Pack (sold separately)
Legend
DISCONNECT
CONNECT / RECONNECT
TURN / FLIP
DIRECTIONAL
TWIST / BRAID
POWER ON TEST
NOTE ICON
INSTRUCTIONS
22
FINAL PRODUCT
This finally completes installation of the Light My Bricks The Mandalorian
Helmet 75328 Light Kit.
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
FINAL PRODUCT
23
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING
Light My Bricks lighting kits contain individual components that are very small and can be easily damaged if not handled correctly.
To prevent unnecessary
If you are experiencing
damage to components,
issues with your Light
we highly recommend that My Bricks set, watch our
the User Guide section,
troubleshooting video or
“Important things to note” read on for a list of
is read carefully. Follow the common causes to help you
handling procedures in the troubleshoot.
User Guide to help prevent
faults and damages to your
Light My Bricks components.
TROUBLESHOOTING
24
Troubleshooting
Firstly, ensure that the batteries have power using a battery charge gauge. If
the batteries have no power, replace the batteries. If the batteries still
have power, check to see if the batteries have been inserted correctly into
the battery pack.
TROUBLESHOOTING
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Check For CR2032 Batteries Using The Flat Battery Pack
Inside the battery pack is a symbol indicating which side the (round) CR2032
battery should be inserted. Check that the “+” side of the battery pack has
the battery with the “+” symbol facing downwards.
On the opposite side, the “-” side of the battery pack should have the battery
flipped upside down, that is the “+” symbol facing upwards
CR2032
25
Troubleshooting
Check For Cr2032 Batteries Using The Round Battery Pack
Inside the battery pack is a symbol indicating which side the (round) CR2032
battery should be inserted. In this case, for the stacked battery pack, ensure
that BOTH batteries have the “+” symbol facing upwards.
CR2032
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Check for AA batteries using the AA battery pack
Inside the battery pack are symbols indicating which direction the AA battery
should be inserted. The flat side of the battery should be paired with the
spring side of the battery pack. If the batteries have been installed
correctly and your kit still isn’t operating correctly, the next step is to
check the wiring.
TROUBLESHOOTING
26
Troubleshooting
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
Check Your Wires
In order for Light My Bricks components to fit in between and underneath LEGO
bricks, the components need to be very small. Due to this nature, Light My
Bricks components can be easily damaged when not handled correctly.
Be careful when removing unpacked components out of the packaging and ensure
not to forcibly pull at the wires as this can damage the soldering that attach
the wires to the LEDs.
If the wiring is detached from the LED itself, the light will not operate.
When connecting lights to your LEGO set, check that there are no pinched wires
underneath or in between bricks and plates. When the wires are pinched and the
exposed wires are touching each other, this can cause a crosswire and the
lights to not function correctly.
TROUBLESHOOTING
27
Troubleshooting
Check Your Expansion Board Ports/ Strip Light Ports / Effects Board Ports
It is important to note that connectors can only be inserted to the expansion
board, strip light, or effects board ports in one direction. Forcibly
inserting connectors in the incorrect direction will result in damaging the
pins inside each of the ports on your component board. Not only will a light
connected to the damaged port not work, but if the pins inside the port are
bent to a point they are touching each other, this can result in all other
lights in the system to stop working. This is a short circuit.
TROUBLESHOOTING
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
A short circuit can also result in overheating of the board, cable or
batteries. If you suspect a short circuit, DISCONNECT POWER IMMEDIATELY
Batteries can fail, catch fire, or even explode if left connected to a short
circuit for too long. If you suspect you have a faulty component due to a bent
pin, try the following steps: If you look carefully inside each of the ports,
each port contains 2 small pins that should be straight. You will be able to
identify a faulty port if it has any bent pins.
28
LEGO THE MANDALORIAN HELMET 75328 LIGHT KIT INSTALL GUIDE
CONTACT US
If you have an enquiry regarding the online shop, our products or a general
enquiry please refer to our Frequently Asked Questions webpage. Alternatively,
you can contact our Customer Services team by visiting our online support
portal.
support.lightmybricks.com
We thank you for purchasing this product and hope you enjoy!
TROUBLESHOOTING
29
lightmybricks.com
References
- LEGO Lights & Lighting Kits - Free Global Shipping | Light My Bricks – Light My Bricks USA
- Light My Bricks Support Portal