VIXSON 35X35CM Paving Mold Pave Shape User Manual
- August 14, 2024
- VIXSON
Table of Contents
VIXSON 35X35CM Paving Mold Pave Shape
CONTENT OF THE PACKAGE
- 1 x paving mold
SPECIFICATIONS
- Size: 36 cm x 36 cm.
INSTRUCTIONS FOR USE
- Place the mold on a relatively flat surface. For best results, remove the top 2 cm of soil and level the mold before filling it with concrete. (Use the removed soil to fill the spaces on the sides and between the pavers).
- Thoroughly mix the concrete until it resembles plastic. If additional water is needed, add small amounts until you achieve the correct consistency.
- Fill each space of the mold with a bucket or masonry trowel.
- When the concrete is not completely set, level the surface with a masonry trowel.
- Then remove the mold.
- After removing the mold, level all edges with a masonry trowel until you are satisfied with the appearance. To make the work easier, dip the trowel in water.
- Place the mold next to the finished paver and continue with the previous steps until you finish the project.
CAUTION
- For maximum strength, the concrete must dry for at least 5-7 days. Once the concrete is completely dry, you can accentuate the joints between the pavers with a mixture of sand and soil.
- Place the dry mixture in the cracks and level it to the desired height. Moisten the mixture with a little water (not too much) and let it harden. That completes the project.
CLEANING
- The paving mold can be cleaned with water and soap and dried with a dry cloth.
FAQ
- How long does the concrete need to dry for maximum strength?
- The concrete must dry for at least 5-7 days for maximum strength.
- How should I clean the paving mold?
- You can clean the paving mold with water and soap and then dry it with a dry cloth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>