ANKER A3303 Bluetooth 2-in-1 Transmitter and Receiver aptX Low-Latency Technology User Manual
- June 5, 2024
- Anker
Table of Contents
ANKER A3303 Bluetooth 2-in-1 Transmitter and Receiver aptX Low-Latency
Technology
At a Glance
- Multi-function button
- Volume down button
- Mute button
- Phone call button
- Volume up button
- Status LED
- Power LED
- Power button
- Bluetooth button
- Bluetooth LED
- USB port (Type-A) for charge-out
- Audio output port
- USB port (Type-C) for charge
Connecting
Connect to PC Bluetooth USB adapter
Plug the Bluetooth USB adapter into a USB port on your PC, Power Conf+ is ready to use when powered on.
Having a problem? You might need to manually set PowerConf+ as the audio device for your PC system or conference software.
iOS System
System Preferences > Sound > Sound Effects / Output / Input
Windows System
Right click on the sound icon > Open Sound settings > Choose your output device / Choose your input device
Software (Zoom)
Audio Settings… > Microphone / Speaker
Connect to PC (USB-C cable)
Connect to smartphone (Bluetooth pairing)
When powered on, PowerConf+ will automatically enter the Bluetooth pairing mode. Select Anker PowerConf+ on your smartphone’s Bluetooth list to connect.
| Press| Enter pairing mode
---|---|---
| Flashes blue| Bluetooth pairing
| Steady blue| Bluetooth connected
Each time you power on PowerConf +, it will automatically connect with the last successfully connected device if available. To disconnect Bluetooth, press the Bluetoth button again.
Powering On/Off
Press and hold the power button for 2 seconds to power on. The status LED will light on clockwise and then fade out. To power off, press and hold the power button for 2 seconds.
- PowerConf+ will automatically power on once connected to your PC by using the USB-C cable.
- PowerConf+ will automatically power off after 30 minutes of inactivity or no source.
Button Controls
**** | Press or press and hold | Volume up/down |
---|---|---|
**** | Press | Answer/End a call |
Press and hold for 2 seconds | Reject a call | |
**** | Press | Mute or restore the microphone |
**** | Press | Play/Pause music |
Status LED
Lights up white for 2 seconds | Connected to power or PC |
---|---|
Breathes green | Coming call |
Partially lights up blue | Sound direction detected |
Lights up blue clockwise or counterclockwise | Increase/Decrease volume |
Turns red | Muted |
Lights up green | Press Power button to check the battery level |
Charging
Charge your PowerConf+
Charge an external device
When powered off or being charged, PowerConf + won’t charge out. When the remaining battery is less than 30%, the charge out current will be 5V 1A; if less than 10%, PowerConf + won’t charge out.
Audio Output
Connect an external speaker to the AUX OUT port of PowerConf + by using an AUX cable (not provided). The audio will be played through the speaker.
Soundcore App
Download the Soundcore App for software updates.
Specifications
References
- soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
- Anker (アンカー) Japan公式サイト – Anker Japan公式サイト