LIGHT MY BRICKS 10312 LEGO Jazz Club Light Kit Installation Guide
- June 9, 2024
- LIGHT MY BRICKS
Table of Contents
10312 LEGO Jazz Club Light Kit
LEGO® JAZZ CLUB #10312 LIGHT KIT
INSTALLATION GUIDE
Light My Bricks
LEGO® JAZZ CLUB 10312 INSTALLATION GUIDE
Hi There! We’re here to help you get started on the LEGO® Jazz Club 10312
Light Kit. This PDF details the instructions for the LED light kit only. If
you run into any issues, please refer to the troubleshooting section towards
the end of this guide. Have fun and enjoy!
INSTALLATION GUIDE
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE 2
PACKAGE CONTENTS:
1 x Multi-Colour Strip Light 6 x White Strip Light 8 x White 15cm Micro Bit
Light 14 x White 15cm Bit Light 4 x White 30cm Bit Light 1 x Pink 30cm Bit
Light 1 x Blue 30cm Bit Light 1 x Flashing Red 30cm Bit Light 1 x Orange 30cm
Large Bit Light 1 x Lamp Post – White
1 x Micro 8-Port Expansion Board 3 x 6-Port Expansion Board 1 x 8-Port
Expansion Board 1 x 12-Port Expansion Board 1 x Flicker Effects Board
2 x 5cm Connecting Cable 5 x 15cm Connecting Cable 2 x 30cm Connecting Cable 4
x Wireless Power Connectors
1x USB Power Cable (Power Source not Included)
+ 10x Adhesive Square
PACKAGE CONTENTS
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
ASSORTED BRICKS:
· 6 x Plate 1×6 (Any Colour) · 6 x Round Plate 1×1 w/ Open Stud – Black · 1 x
Tile 1×1 W Clip Round Edges – Black · 3 x Plate 1×1 Mod Rounded w Handle –
Black · 2 x Arm Skeleton, Bent with Clips (Horizontal Grip) – Black · 6 x
Round Plate 1×1 – Trans Yellow · 1 x Round Plate 1×1 – Trans Clear · 4 x Round
Plate 1×1 w/ Open Stud – White · 2 x Plate 1×2 – Light Grey · 2 x Plate 1×2 –
Black · 2 x Tile 1×1 – Dark Grey · 10 x Tile 1×2 – Dark Grey
- Indicates components which include spares 3
Contents
Before You Begin
5
Blueprint
10
Instructions
11
Final Product
56
Troubleshooting
57
Contact
61
CONTENTS
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE 4
Before You Begin
Laying cables in between and underneath bricks
Cables can fit in between and underneath LEGO® bricks, plates, and tiles
providing they are laid correctly between the LEGO® studs. Do NOT forcefully
join LEGO® together around cables; instead ensure they are laying comfortably
in between each stud. CAUTION: Forcing LEGO® to connect over a cable can
result in damaging the cable and light.
BEFORE YOU BEGIN
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Connecting Cable Connectors To Expansion Boards
Take extra care when inserting connectors to ports of Expansion Boards.
Connectors can be inserted only one way. With the expansion board facing up,
look for the soldered “=” symbol on the left side of the port. The connector
side with the wires exposed should be facing toward the soldered “=” symbol as
you insert into the port. If a plug won’t fit easily into a port connector, do
not force it. Incorrectly inserting the connector can result in bent pins
inside the port or possible overheating of the expansion board when connected.
5
Before You Begin
Connecting Cable Connectors To Strip Lights
Take extra care when inserting connectors to ports on the Strip Lights.
Connectors can be inserted only one way. With the Strip Light facing up,
ensure the side of the connector with the wires exposed is facing down. If a
plug won’t fit easily into a port connector, don’t force it. Doing so will
damage the plug and the connector.
BEFORE YOU BEGIN
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Connecting Micro Cable Connectors To Micro Expansion Board Ports
Take extra care when inserting the micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is
similar to connecting lights and cables to Strip Lights. With the expansion
board facing up, ensure the side of the connector with the wires exposed is
facing down. If a plug won’t fit easily into a port connector, do not force
it. Use your fingernail to push the plastic part of the connector to the micro
port.
6
Before You Begin
Installing Bit Lights Under Lego® Bricks And Plates
When installing Bit Lights under LEGO® pieces, ensure they are placed the
correct way up (Yellow LED component exposed). You can either place them
directly on top of LEGO® studs or in between.
BEFORE YOU BEGIN
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE 7
Before You Begin
The Symbols Used In This Guide
When going through the following guide you will come across symbols and
formats that will assist with the installation of your light kit. Take notice
of them as each has a specific purpose.
Light Kit Component
This is the most important image format as it indicates which part to use from
the Light Kit. Make sure you pay close attention to which part is shown.
White 30cm Bit Light
BEFORE YOU BEGIN
Connect
Used when you need to connect a LEGO piece or LMB component.
Disconnect
Used when you need to remove a LEGO piece/ section or LMB component.
Directional
Used to show where to route cables, place components, or move them.
Bend/Pivot
Used when a component needs to be bent, or part folded or pivoted.
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Turn/ Flip
Will be found in the top left corner when the set needs to be rotated or
flipped.
Twist/ Braid
Seen when a set of cables need to be grouped and twisted together.
Power On Test
Found at the end of a major step to test the lights. Will be located in the
top left corner.
Note
Notes will be found alongside the instruction photos and explain what to do.
8
Before You Begin
Repeat Step
Repeat the previous step eg.
x2
Make a spotlight, then make a
second spotlight.
Connect Focus
Used to highlight a hard to see area where a component is being connected.
Disconnect Focus
Used to highlight a hard to see area where a component is being disconnected.
General Focus
Used to highlight a hard to see area where a component needs to be acted on.
BEFORE YOU BEGIN
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
General Note
This is a sample note that is used anywhere in this guide. It will explain a
difficult section where photos are hard to illustrate or easily confused.
Connect Note
The green coloured note is used when the topic focuses on a component being
connected, like the shown Power Bank.
Disconnect Note
The red coloured note is used when the topic focuses on a component being
disconnected or like here, the removed pieces.
NOTE
Take the 5cm Connecting Cable from the 4-Port Micro Expansion Board and route
it into the “IN” port of the Flicker Effects Board
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
NOTE
You should have these parts left over that were removed from the LEGO set
Removed Pieces 9
BLUEPRINT
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
BLUEPRINT
10
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
To ensure a smooth installation of your light kit, please read and follow each
step carefully. If you run into any issues, please refer to the online
troubleshooting guide.
INSTRUCTIONS
Wenn Sie Probleme mit Ihrem Light My Bricks-Set haben, sehen Sie sich unser
Video zur Fehlerbehebung an oder lesen Sie die Auflistung der häufigsten
Ursachen, die Ihnen bei der Fehlersuche helfen hier. Si vous rencontrez des
problèmes avec votre kit Light My Bricks, regardez notre vidéo de dépannage ou
consultez la liste des causes les plus fréquentes pour vous aider à les
résoudre ici.
Se si verificano problemi con il set Light My Bricks, guardare il nostro video
per la risoluzione dei problemi o leggere l’elenco delle cause più comuni per
la risoluzione dei problemi qui.
11
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
1
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
12
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
2
NOTE
Lamp Post – White
Use the LEGO Removal Tool to assist in disconnecting parts
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
13
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
3
12-Port Expansion Board
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
14
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Orange 30cm Large Bit Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
15
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
4
5
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
16
White 15cm Bit Light
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
NOTE
Take note of which cable is the Orange Large Bit Light (from the oven)
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
17
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
NOTE
Connect the Orange 30cm Large Bit Light into the `OUT’ port of the Flicker
Effects Board
6
Flicker Effects Board
5cm Connecting Cable
NOTE
Connect the 5cm Connecting Cable into the “IN” port of the Flicker Effects
Board
NOTE
Connect the 5cm Connecting Cable and White 15cm Bit Light to the 12-Port
Expansion Board
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
18
7
USB Power Cable
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
8
INSTRUCTIONS
DISCONNECT
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
!
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
19
White 15cm Bit Light
Round Plate 1×1 Open Stud – White
9
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
x3
INSTRUCTIONS
NOTE
Do not push the pole too far up the Open Stud as this will break the LED. Only
push until the two sections are secured as one.
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
20
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE Pink 30cm Bit Light
Blue 30cm Bit Light
Round Plate 1×1 Open Stud – Black
Round Plate 1×1 Open Stud – Black
Flashing Red 30cm Bit Light
Round Plate 1×1 Open Stud – Black
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
21
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
10
6-Port Expansion Board
11
2x Adhesive Square
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
22
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
23
12
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
13
30cm Connecting Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
24
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
NOTE
Run the USB Power Cable inbetween the studs where the two `L’ plates were
positioned
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
25
14
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
26
15
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
!
White 15cm Micro Bit Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
27
NOTE
Repeat this process for the other 6 lights
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE 2x Adhesive Square
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
28
16
15cm Connecting Cable
17
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Multi Colour Strip Light
30cm Connecting Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
29
18
White 30cm Bit Light
Round Plate 1×1 Open Stud – Black
Plate 1×1 Mod Rounded W/ Handle – Black
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE Arm Skeleton, Bent W/ Clips
Horizontal Grip – Black
x2
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
30
19
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
31
20
2 x Plate 1×2 – Black
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
32
21
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE White 15cm Bit Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
33
x2
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
34
22
Wireless Power Connector Tile
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
35
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
23
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE Wireless Power Connector Plate
!
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
36
White Strip Light
Plate 1×6 – Dark Grey
5cm Connecting Cable
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
37
24
2x Adhesive Square
6-Port Expansion Board
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Wireless Power Connector Tile
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
38
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE 3 x Tile 1×2 – Dark Grey
25
Round Plate 1×1 Open Stud – White
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
39
White 30cm Bit Light
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
40
NOTE
Twist the Wireless Power Connector and Bit Light cable as much as you can to
reduce slack
26
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
41
White 15cm Bit Light Round Plate 1×1 – Trans Clear
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
27
Wireless Power Connector Tile
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
42
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
2x Adhesive Square
6-Port Expansion Board
28
15cm Connecting Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
43
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
NOTE
Ensure the Wireless Power Connectors are aligned when re-connecting the floors
2 x Tile 1×1 – Dark Grey
2 x Tile 1×2 – Dark Grey
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
44
29
Wireless Power Connector Plate
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE White Strip Light
Plate 1×6 – Dark Grey
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
45
30
White 15cm Bit Light
Round Plate 1×1 Open Stud – Black
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Tile 1×1 W/ Clip Round Edges Black
Plate 1×1 Mod Rounded W/ Handle – Black
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
46
31
NOTE
Ensure the Wireless Power Connectors are aligned when re-connecting the floors
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE Wireless Power Connector Plate
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
47
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
48
32
White 15cm Bit Light
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Round Plate 1×1 – Trans Yellow
INSTRUCTIONS
NOTE
Repeat this process for the other 5 lights
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
49
33
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Wireless Power Connector Tile
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
50
4 x Tile 1×2 – Dark Grey
34
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE 8-Port Expansion Board
White Strip Light
Plate 1×6 – Dark Grey
15cm Connecting Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
51
x2
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE 2x Adhesive Square
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
52
2 x Plate 1×2 – Light Grey
35
NOTE
Ensure the Wireless Power Connectors are aligned when re-connecting the floors
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Wireless Power Connector Plate White Strip Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
53
Plate 1×6 – Dark Grey
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
15cm Connecting Cable
INSTRUCTIONS
x2
NOTE
Ensure the Wireless Power Connectors are aligned when re-connecting the floors
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
54
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
!
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
NOTE
You should have these parts left over that were removed from the LEGO set
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
55
FINAL PRODUCT
This finally completes installation of the Light My Bricks LEGO® Jazz Club
10312 Light Kit.
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
FINAL PRODUCT
56
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING
Light My Bricks lighting kits contain individual components that are very small and can be easily damaged if not handled correctly.
To prevent unnecessary damage to components, we highly recommend that the User Guide section, “Important things to note” is read carefully. Follow the handling procedures in the User Guide to help prevent faults and damages to your Light My Bricks components.
If you are experiencing issues with your Light My Bricks set, watch our troubleshooting video or read on for a list of common causes to help you troubleshoot.
Wenn Sie Probleme mit Ihrem Light My Bricks-Set haben, sehen Sie sich unser
Video zur Fehlerbehebung an oder lesen Sie die Auflistung der häufigsten
Ursachen, die Ihnen bei der Fehlersuche helfen hier.
Si vous rencontrez des problèmes avec votre kit Light My Bricks, regardez
notre vidéo de dépannage ou consultez la liste des causes les plus fréquentes
pour vous aider à les résoudre ici.
Se si verificano problemi con il set Light My Bricks, guardare il nostro video
per la risoluzione dei problemi o leggere l’elenco delle cause più comuni per
la risoluzione dei problemi qui.
TROUBLESHOOTING
57
Troubleshooting
Firstly, ensure that the batteries have power using a battery charge gauge. If
the batteries have no power, replace the batteries. If the batteries still
have power, check to see if the batteries have been inserted correctly into
the battery pack.
TROUBLESHOOTING
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
Check for AA batteries using the AA battery pack
Inside the battery pack are symbols indicating which direction the AA battery
should be inserted. The flat side of the battery should be paired with the
spring side of the battery pack. If the batteries have been installed
correctly and your kit still isn’t operating correctly, the next step is to
check the wiring.
58
Troubleshooting
Check Your Wires
In order for Light My Bricks components to fit in between and underneath LEGO®
bricks, the components need to be very small. Due to this nature, Light My
Bricks components can be easily damaged when not handled correctly.
Be careful when removing unpacked components out of the packaging and ensure
not to forcibly pull at the wires as this can damage the soldering that attach
the wires to the LEDs.
If the wiring is detached from the LED itself, the light will not operate.
When connecting lights to your LEGO® set, check that there are no pinched
wires underneath or in between bricks and plates. When the wires are pinched
and the exposed wires are touching each other, this can cause a crosswire and
the lights to not function correctly.
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING
59
Troubleshooting
Check Your Expansion Board Ports/ Strip Light Ports / Effects Board Ports
It is important to note that connectors can only be inserted to the expansion
board, strip light, or effects board ports in one direction. Forcibly
inserting connectors in the incorrect direction will result in damaging the
pins inside each of the ports on your component board. Not only will a light
connected to the damaged port not work, but if the pins inside the port are
bent to a point they are touching each other, this can result in all other
lights in the system to stop working. This is a short circuit.
TROUBLESHOOTING
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
A short circuit can also result in overheating of the board, cable or
batteries. If you suspect a short circuit, DISCONNECT POWER IMMEDIATELY
Batteries can fail, catch fire, or even explode if left connected to a short
circuit for too long. If you suspect you have a faulty component due to a bent
pin, try the following steps: If you look carefully inside each of the ports,
each port contains 2 small pins that should be straight. You will be able to
identify a faulty port if it has any bent pins.
60
LEGO® JAZZ CLUB 10312 LIGHT KIT INSTALL GUIDE
CONTACT US
If you have an enquiry regarding the online shop, our products or a general
enquiry please refer to our Frequently Asked Questions webpage. Alternatively,
you can contact our Customer Services team by visiting our online support
portal.
support. lightmybricks.com
We thank you for purchasing this product and hope you enjoy!
TROUBLESHOOTING
61
lightmybricks.com
© 2022 Light My Bricks Pty Ltd – Head Office: 4/26 Rushdale Street, Knoxfield
VIC 3180, Australia. Phone: +61 420 643 543 | All Rights Reserved | Light My
BricksTM sell LED lighting kits only. All LEGO® sets featured in images are
sold separately. Light My BricksTM and the Light My Bricks logo, are
trademarks and copyrights of Light My Bricks Pty Ltd. LEGO® is a trademark of
the LEGO® Group of Companies which does not sponsor, authorise, or endorse
this document.