LIGHT MY BRICKS 21344 The Orient Express Train Installation Guide
- June 16, 2024
- LIGHT MY BRICKS
Table of Contents
- 21344 The Orient Express Train
- Product Information:
- Specifications:
- Product Usage Instructions:
- Before You Begin:
- Connecting Cable Connectors To Expansion Boards:
- Connecting Cable Connectors To Strip Lights:
- Connecting Micro Cable Connectors To Micro Expansion Board
- The Symbols Used In This Guide:
- Q: What are the package contents of the Light My Bricks
- Q: How do I connect the cable connectors to the expansion
- Q: How should I connect the cable connectors to the strip
- Q: How do I connect the micro cable connectors to the micro
21344 The Orient Express Train
Product Information:
Specifications:
-
Package Contents:
-
Individual Bags
-
Mixed Components 1
-
4 x 6-Port Expansion Board
-
1 x 8-Port Expansion Board
-
10 x Adhesive Squares
-
Connecting Cables
- 1 x Connecting Cable 5cm
- 1 x Connecting Cable 30cm
- 3 x Connecting Cable 50cm *
-
USB Power Cable
- 1x USB Power Cable (Power Source not Included)
-
Mixed Components 2
-
9 x Plate, Round 1×1 with Open Stud – Trans Clear
-
6 x Plate, Round 1×1 with Open Stud – Black
-
2 x Plate, Round 1×1 – Trans Clear
-
1 x Plate, Round 1×1 – Trans Red
-
1 x Plate, Round 1×1 – Red
-
Mixed Components 3
-
1 x Brick, Round 1×1 With Open Stud – Trans Clear
-
1 x Plate, Modified 1 x 1 with U Clip (Horizontal Grip) –
Black -
1 x Tile, Modified 1 x 1 with Open O Clip – Black
-
3 x Plate, Modified 1 x 2 with Bar Handle on End – Black
-
4 x Plate, Round 1 x 1 with Bar Handle – Black
-
3 x Arm Skeleton, Bent with Clips (Horizontal Grip) –
Blackd
-
Product Usage Instructions:
Before You Begin:
Laying cables in between and underneath bricks
Connecting Cable Connectors To Expansion Boards:
Take the connecting cables and insert the connectors into the
ports on the Expansion Boards. Ensure that the connectors are
inserted correctly and securely.
Connecting Cable Connectors To Strip Lights:
When connecting the cable connectors to the Strip Lights, be
careful to follow these steps:
-
Take extra care when inserting connectors to ports on the Strip
Lights. -
Connectors can be inserted only one way. With the Strip Light
facing up, ensure the side of the connector with the wires exposed
is facing down. -
If a plug won’t fit easily into a port connector, do not force
it. Doing so will damage the plug and the connector.
Connecting Micro Cable Connectors To Micro Expansion Board
Ports:
When connecting Micro Cable connectors to Micro Expansion Board
ports, follow these steps:
-
Take extra care when inserting the micro connectors to micro
ports of Micro Expansion Boards. -
Connecting Micro Bit Lights to Micro Expansion Boards is
similar to connecting lights and cables to Strip Lights. -
With the expansion board facing up, ensure the side of the
connector with the wires exposed is facing down. -
If a plug won’t fit easily into a port connector, do not force
it. Use your fingernail to push the plastic part of the connector
to the micro port.
The Symbols Used In This Guide:
When going through the installation guide, you will come across
symbols and formats that have specific purposes. Pay close
attention to them as they will assist with the installation of your
light kit.
-
Light Kit Component: This image format indicates which part to
use from the Light Kit. Make sure you pay close attention to which
part is shown. -
White 30cm Bit Light: Indicates a specific type of light
component. -
Connect: Used when you need to connect a LEGO piece or LMB
component. -
Disconnect: Used when you need to remove a LEGO piece/ section
or LMB component. -
Directional: Used to show where to route cables, place
components, or move them. -
Bend/Pivot: Used when a component needs to be bent, or part
folded or pivoted. -
Turn/Flip: Indicates when the set needs to be rotated or
flipped. -
Twist/Braid: Seen when a set of cables needs to be grouped and
twisted together. -
Power On Test: Found at the end of a major step to test the
lights. Will be located in the top left corner.
FAQ:
Q: What are the package contents of the Light My Bricks
kit?
A: The package contents include individual bags, mixed
components 1, mixed components 2, mixed components 3, and a USB
power cable.
Q: How do I connect the cable connectors to the expansion
boards?
A: To connect the cable connectors to the expansion boards,
carefully insert the connectors into the ports on the expansion
boards.
Q: How should I connect the cable connectors to the strip
lights?
A: When connecting the cable connectors to the strip lights,
ensure that the side of the connector with the wires exposed is
facing down. Do not force a plug into a port connector if it
doesn’t fit easily, as it can damage the plug and the
connector.
Q: How do I connect the micro cable connectors to the micro
expansion board ports?
A: To connect the micro cable connectors to the micro expansion
board ports, insert the connectors into the ports while ensuring
that the side with the wires exposed is facing down. If a plug
won’t fit easily, use your fingernail to push the plastic part of
the connector to the micro port.
LEGO® THE ORIENT EXPRESS TRAIN #21344 LIGHT KIT
INSTALLATION GUIDE
Light My Bricks
LEGO® THE ORIENT EXPRESS TRAIN 21344 INSTALLATION GUIDE
Hi There! We’re here to help you get started on the LEGO® The Orient Express
Train 21344 Light Kit. This PDF details the instructions for the LED light kit
only. If you run into any issues, please refer to the troubleshooting section
towards the end of this guide. Have fun and enjoy!
INSTALLATION GUIDE
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE 2
PACKAGE CONTENTS:
Individual Bags
· 8 x Bit Light Yellow – 30cm · 6 x Bit Light Yellow – 15cm · 5 x Bit Light
White – 15cm · 3 x Bit Light Large Warm White – 30cm
Mixed Components 1
4 x 6-Port Expansion Board 1 x 8-Port Expansion Board 10 x Adhesive Squares
Connecting Cables
1 x Connecting Cable 5cm 1 x Connecting Cable 30cm 3 x Connecting Cable 50cm
USB Power Cable
1x USB Power Cable (Power Source not Included)
PACKAGE CONTENTS
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Mixed Components 2
9 x Plate, Round 1×1 with Open Stud – Trans Clear 6 x Plate, Round 1×1 with
Open Stud – Black 2 x Plate, Round 1×1 – Trans Clear 1 x Plate, Round 1×1 –
Trans Red 1 x Plate, Round 1×1 – Red
Mixed Components 3
1 x Brick, Round 1×1 With Open Stud – Trans Clear 1 x Plate, Modified 1 x 1
with U Clip (Horizontal Grip) – Black 1 x Tile, Modified 1 x 1 with Open O
Clip – Black 3 x Plate, Modified 1 x 2 with Bar Handle on End – Black 4 x
Plate, Round 1 x 1 with Bar Handle – Black 3 x Arm Skeleton, Bent with Clips
(Horizontal Grip) – Blackd
- Indicates components which include spares 3
Contents
Before You Begin
5
Blueprint
10
Instructions
11
Final Product
63
Troubleshooting
64
Contact
68
CONTENTS
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE 4
Before You Begin
Laying cables in between and underneath bricks
Cables can fit in between and underneath LEGO® bricks, plates, and tiles
providing they are laid correctly between the LEGO® studs. Do NOT forcefully
join LEGO® together around cables; instead ensure they are laying comfortably
in between each stud. CAUTION: Forcing LEGO® to connect over a cable can
result in damaging the cable and light.
BEFORE YOU BEGIN
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Connecting Cable Connectors To Expansion Boards
Take extra care when inserting connectors to ports of Expansion Boards.
Connectors can be inserted only one way. With the expansion board facing up,
look for the soldered “=” symbol on the left side of the port. The connector
side with the wires exposed should be facing toward the soldered “=” symbol as
you insert into the port. If a plug won’t fit easily into a port connector, do
not force it. Incorrectly inserting the connector can result in bent pins
inside the port or possible overheating of the expansion board when connected.
5
Before You Begin
Connecting Cable Connectors To Strip Lights
Take extra care when inserting connectors to ports on the Strip Lights.
Connectors can be inserted only one way. With the Strip Light facing up,
ensure the side of the connector with the wires exposed is facing down. If a
plug won’t fit easily into a port connector, don’t force it. Doing so will
damage the plug and the connector.
BEFORE YOU BEGIN
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Connecting Micro Cable Connectors To Micro Expansion Board Ports
Take extra care when inserting the micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is
similar to connecting lights and cables to Strip Lights. With the expansion
board facing up, ensure the side of the connector with the wires exposed is
facing down. If a plug won’t fit easily into a port connector, do not force
it. Use your fingernail to push the plastic part of the connector to the micro
port.
6
Before You Begin
Installing Bit Lights Under Lego® Bricks And Plates
When installing Bit Lights under LEGO® pieces, ensure they are placed the
correct way up (Yellow LED component exposed). You can either place them
directly on top of LEGO® studs or in between.
BEFORE YOU BEGIN
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE 7
Before You Begin
The Symbols Used In This Guide
When going through the following guide you will come across symbols and
formats that will assist with the installation of your light kit. Take notice
of them as each has a specific purpose.
Light Kit Component
This is the most important image format as it indicates which part to use from
the Light Kit. Make sure you pay close attention to which part is shown.
White 30cm Bit Light
BEFORE YOU BEGIN
Connect
Used when you need to connect a LEGO piece or LMB component.
Disconnect
Used when you need to remove a LEGO piece/ section or LMB component.
Directional
Used to show where to route cables, place components, or move them.
Bend/Pivot
Used when a component needs to be bent, or part folded or pivoted.
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Turn/ Flip
Will be found in the top left corner when the set needs to be rotated or
flipped.
Twist/ Braid
Seen when a set of cables need to be grouped and twisted together.
Power On Test
Found at the end of a major step to test the lights. Will be located in the
top left corner.
Note
Notes will be found alongside the instruction photos and explain what to do.
8
Before You Begin
Repeat Step
Repeat the previous step eg.
x2
Make a spotlight, then make a
second spotlight.
Connect Focus
Used to highlight a hard to see area where a component is being connected.
Disconnect Focus
Used to highlight a hard to see area where a component is being disconnected.
General Focus
Used to highlight a hard to see area where a component needs to be acted on.
BEFORE YOU BEGIN
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
General Note
This is a sample note that is used anywhere in this guide. It will explain a
difficult section where photos are hard to illustrate or easily confused.
Connect Note
The green coloured note is used when the topic focuses on a component being
connected, like the shown Power Bank.
Disconnect Note
The red coloured note is used when the topic focuses on a component being
disconnected or like here, the removed pieces.
NOTE
Take the 5cm Connecting Cable from the 4-Port Micro Expansion Board and route
it into the “IN” port of the Flicker Effects Board
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
NOTE
You should have these parts left over that were removed from the LEGO set
Removed Pieces 9
BLUEPRINT
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
BLUEPRINT
10
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
To ensure a smooth installation of your light kit, please read and follow each
step carefully. If you run into any issues, please refer to the online
troubleshooting guide.
Wenn Sie Probleme mit Ihrem Light My Bricks-Set haben, sehen Sie sich unser
Video zur Fehlerbehebung an oder lesen Sie die Auflistung der häufigsten
Ursachen, die Ihnen bei der Fehlersuche helfen hier.
Si vous rencontrez des problèmes avec votre kit Light My Bricks, regardez
notre vidéo de dépannage ou consultez la liste des causes les plus fréquentes
pour vous aider à les résoudre ici.
Se si verificano problemi con il set Light My Bricks, guardare il nostro video
per la risoluzione dei problemi o leggere l’elenco delle cause più comuni per
la risoluzione dei problemi qui.
INSTRUCTIONS
11
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
1
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
12
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
2
x2
3
Yellow 30cm Bit Light
Plate, Round 1×1 – Trans-Clear
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
13
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
4
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
14
Plate, Round 1×1 with Open Stud – Black
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
NOTE
Pull the Cable through the open stud of the 1×1 Round Plate so it is tight.
Then pin the 1×1 Round Plate as shown.
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
15
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
5
Plate, Round 1×1 with Open Stud – Black
INSTRUCTIONS
NOTE
Pull the Cable through the open stud of the 1×1 Round Plate so it is tight.
Then pin the 1×1 Round Plate as shown.
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
16
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
6
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
17
Yellow 15cm Bit Light
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
7
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
18
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
8
Yellow 15cm Bit Light Plate, Round 1×1 – Red
9
White 15cm Bit Light
Plate, Round 1×1 with Open Stud Trans Clear
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
19
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
10
Plate, Modified 1×1 with Open O Clip (Horizontal Grip) – Black
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
20
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
11
8-Port Expansion Board
INSTRUCTIONS
NOTE
Small detail shown here allows you to open and close the coal boiler door.
2x Adhesive Square
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
21
30cm Connecting Cable
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
12
Warm White 30cm Large Bit Light
Plate, Round 1×1 with Open Stud – Black
INSTRUCTIONS
NOTE
Bring the bundled up cable around to the back of the Expansion Board as shown
here. It will pin down with the Adhesive Squares.
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
22
Plate, Round 1×1 with Bar Handle – Black
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Plate, Modified 1×2 with Bar Handle on End – Black
Arm Skeleton, Bent with Clips (Horizontal Grip) – Black
x3
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
23
13
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
NOTE
Loop the cable from the Spot Light around this Technic Pin.
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
24
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
14
USB Power Cable
INSTRUCTIONS
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
NOTE
Remove the USB Power Cable form the 8-Port Expansion Board to be used later.
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
25
15
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
16
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
26
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
27
17
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
28
18
19
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Yellow 30cm Bit Light
Yellow 30cm Bit Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
29
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
NOTE
Pinch the two cables together at the back of the bunk bed like this. Do this
while clicking the bed back into place.
20
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
30
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Plate, Round 1×1 with Open Stud Trans Clear
Yellow 15cm Bit Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
31
21
NOTE
Press the two cables running from the Bunk Bed hard up against the wall of the
train. The bench will clip them down.
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
32
22
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
White 15cm Bit Light
Plate, Round 1×1 with Open Stud Trans Clear
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
33
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
23
6-Port Expansion Board 2x Adhesive Square
50cm Connecting Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
34
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
35
24
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
25
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
36
Plate, Round 1×1 with Open Stud Trans Clear
Yellow 30cm Bit Light
26
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
37
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Yellow 15cm Bit Light
Brick, Round 1×1 Open Stud Trans-Clear
27
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
38
28
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
White 15cm Bit Light
Plate, Round 1×1 with Open Stud Trans Clear
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
39
29
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE 6-Port Expansion Board
2x Adhesive Square
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
40
30
NOTE
Grab one of the two remaining pre-assembled Spotlights. Plug it into the
6-Port Expansion Board.
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
NOTE
Pinch and twist up the longer cables coming from the 6-Port Expansion Board
excluding the recently attached Spotlight cable.
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
41
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
31
INSTRUCTIONS
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
42
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE 5cm Connecting Cable
32
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
43
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
NOTE
Connect the 30cm Connecting Cable coming from the Coal Storage Carriage into
the Passanger Carriage 6-Port.
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
44
33
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
45
34
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Plate, Round 1×1 with Open Stud Trans Clear
Yellow 30cm Bit Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
46
35
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
x2
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
47
36
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
48
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
White 15cm Bit Light
Plate, Round 1×1 with Open Stud Trans Clear
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
49
37
6-Port Expansion Board 2x Adhesive Square
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE 50cm Connecting Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
50
38
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
39
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
51
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Yellow 15cm Bit Light
Plate, Round 1×1 with Open Stud – Black
40
Tile, Modified 1×1 with Open O Clip – Black
Plate, Round 1×1 with Bar Handle – Black
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
52
40
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
53
41
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE Plate, Round 1×1
– Trans-Red
Yellow 15cm Bit Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
54
42
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
43
White 15cm Bit Light
Plate, Round 1×1 with Open Stud Trans Clear
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
55
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
6-Port Expansion Board
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
56
2x Adhesive Square
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
57
44
NOTE
Grab the last remaining preassembled Spotlights. Plug it into the 6-Port
Expansion Board.
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
NOTE
Pinch the longer cables together and twist them neatly into a bundle.
Excluding the cable from the spotlight.
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
58
45
46
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
59
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
47
INSTRUCTIONS
NOTE
Connect the 5cm Connecting Cable from the first Carriage 6-Port to the second
Carriage 6-Port.
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
60
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
61
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
Removed Pieces
!
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
62
FINAL PRODUCT
This finally completes installation of the Light My Bricks LEGO® The Orient
Express Train 21344 Light Kit.
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
FINAL PRODUCT
63
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING
Light My Bricks lighting kits contain individual components that are very small and can be easily damaged if not handled correctly.
To prevent unnecessary damage to components, we highly recommend that the User Guide section, “Important things to note” is read carefully. Follow the handling procedures in the User Guide to help prevent faults and damages to your Light My Bricks components.
If you are experiencing issues with your Light My Bricks set, watch our troubleshooting video or read on for a list of common causes to help you troubleshoot.
Wenn Sie Probleme mit Ihrem Light My Bricks-Set haben, sehen Sie sich unser
Video zur Fehlerbehebung an oder lesen Sie die Auflistung der häufigsten
Ursachen, die Ihnen bei der Fehlersuche helfen hier.
Si vous rencontrez des problèmes avec votre kit Light My Bricks, regardez
notre vidéo de dépannage ou consultez la liste des causes les plus fréquentes
pour vous aider à les résoudre ici.
Se si verificano problemi con il set Light My Bricks, guardare il nostro video
per la risoluzione dei problemi o leggere l’elenco delle cause più comuni per
la risoluzione dei problemi qui.
TROUBLESHOOTING
64
Troubleshooting
Firstly, ensure that the batteries have power using a battery charge gauge. If
the batteries have no power, replace the batteries. If the batteries still
have power, check to see if the batteries have been inserted correctly into
the battery pack.
TROUBLESHOOTING
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Check for AA batteries using the AA battery pack
Inside the battery pack are symbols indicating which direction the AA battery
should be inserted. The flat side of the battery should be paired with the
spring side of the battery pack. If the batteries have been installed
correctly and your kit still isn’t operating correctly, the next step is to
check the wiring.
65
Troubleshooting
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
Check Your Wires
In order for Light My Bricks components to fit in between and underneath LEGO®
bricks, the components need to be very small. Due to this nature, Light My
Bricks components can be easily damaged when not handled correctly.
Be careful when removing unpacked components out of the packaging and ensure
not to forcibly pull at the wires as this can damage the soldering that attach
the wires to the LEDs.
If the wiring is detached from the LED itself, the light will not operate.
When connecting lights to your LEGO® set, check that there are no pinched
wires underneath or in between bricks and plates. When the wires are pinched
and the exposed wires are touching each other, this can cause a crosswire and
the lights to not function correctly.
TROUBLESHOOTING
66
Troubleshooting
Check Your Expansion Board Ports/ Strip Light Ports / Effects Board Ports
It is important to note that connectors can only be inserted to the expansion
board, strip light, or effects board ports in one direction. Forcibly
inserting connectors in the incorrect direction will result in damaging the
pins inside each of the ports on your component board. Not only will a light
connected to the damaged port not work, but if the pins inside the port are
bent to a point they are touching each other, this can result in all other
lights in the system to stop working. This is a short circuit.
TROUBLESHOOTING
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
A short circuit can also result in overheating of the board, cable or
batteries. If you suspect a short circuit, DISCONNECT POWER IMMEDIATELY
Batteries can fail, catch fire, or even explode if left connected to a short
circuit for too long. If you suspect you have a faulty component due to a bent
pin, try the following steps: If you look carefully inside each of the ports,
each port contains 2 small pins that should be straight. You will be able to
identify a faulty port if it has any bent pins.
67
LEGO® THE ORIENT EXPRESS TRAIN 21344 LIGHT KIT INSTALL GUIDE
CONTACT US
If you have an enquiry regarding the online shop, our products or a general
enquiry please refer to our Frequently Asked Questions webpage. Alternatively,
you can contact our Customer Services team by visiting our online support
portal.
support.lightmybrick.com
We thank you for purchasing this product and hope you enjoy!
TROUBLESHOOTING
68
lightmybricks.com
© 2023 Light My Bricks Pty Ltd – Head Office: 4/26 Rushdale Street, Knoxfield
VIC 3180, Australia. Phone: +61 420 643 543 | All Rights Reserved | Light My
BricksTM sell LED lighting kits only. All LEGO® sets featured in images are
sold separately. Light My BricksTM and the Light My Bricks logo, are
trademarks and copyrights of Light My Bricks Pty Ltd. LEGO® is a trademark of
the LEGO® Group of Companies which does not sponsor, authorise, or endorse
this document.
References
- LEGO Lights & Lighting Kits - Free Global Shipping | Light My Bricks – Light My Bricks USA
- lightmybrick.com - lightmybrick Resources and Information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>