LIGHT MY BRICKS 10317 Light Kit for LEGO Land Rover Classic Defender 90 Instruction Manual
- June 11, 2024
- LIGHT MY BRICKS
Table of Contents
10317 Light Kit for LEGO Land Rover Classic Defender 90
Product Information
The Light My Bricks installation kit comes with various
components including expansion boards, connecting cables, adhesive
squares, and mixed components. The package also includes a USB
power cable, but the power source is not included. The kit includes
spare components marked with an asterisk (*).
Product Usage Instructions
Before You Begin
Before starting the installation process, it is important to lay
cables in between and underneath bricks. Take extra care when
inserting connectors to ports on the strip lights. Connectors can
be inserted only one way. With the strip light facing up, ensure
the side of the connector with the wires exposed is facing down. If
a plug won’t fit easily into a port connector, don’t force it as it
will damage the plug and the connector.
Connecting Cable Connectors to Expansion Boards
When connecting cable connectors to expansion boards, take extra
care to ensure that the micro connectors are inserted correctly
into the micro ports of micro expansion boards. With the expansion
board facing up, ensure that the side of the connector with the
wires exposed is facing down. If a plug won’t fit easily into a
port connector, use your fingernail to push the plastic part of the
connector to the micro port.
Connecting Cable Connectors to Strip Lights
Take extra care when inserting connectors to ports on the strip
lights. Connectors can be inserted only one way. With the strip
light facing up, ensure that the side of the connector with the
wires exposed is facing down. If a plug won’t fit easily into a
port connector, don’t force it. Doing so will damage the plug and
the connector.
The Symbols Used In This Guide
When going through the installation guide, pay attention to the
symbols and formats used. The most important image format is the
Light Kit Component, which indicates which part to use from the
Light Kit. Other symbols include Connect, Disconnect, Directional,
Bend/Pivot, Turn/Flip, Twist/Braid, and Power On Test. Notes will
also be found alongside the instruction photos to explain what to
do.
LEGO® LAND ROVER CLASSIC DEFENDER 90 #10317 LIGHT KIT
INSTALLATION GUIDE
Light My Bricks
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 INSTALLATION GUIDE
Hi There! We’re here to help you get started on the LEGO® Land Rover Classic
Defender 90 10317 Light Kit. This PDF details the instructions for the LED
light kit only. If you run into any issues, please refer to the
troubleshooting section towards the end of this guide. Have fun and enjoy!
INSTALLATION GUIDE
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE 2
PACKAGE CONTENTS:
Individual Bags
· 8x White 15cm Bit Light · 9x Cool White 15cm Bit Light · 7x White 30cm Bit
Light
Mixed Components 1
2x 2-Port Expansion Board 5x 6-Port Expansion Board 2x 8-Port Expansion Board
2x NC Push Board 10x Adhesive Square
Connecting Cables
4x 5cm Connecting Cable 5x 15cm Connecting Cable 2x 30cm Connecting Cable *
USB Power Cable
1x USB Power Cable (Power Source not Included)
PACKAGE CONTENTS
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Mixed Components 2
5x Plate, Round 1×1 – Trans-Clear 4x Plate, Round 1×1 – Trans-Orange 3x Plate,
Round 1×1 – Trans-Red 4x Plate, Round 1×1 with Open Stud – Black
Mixed Components 3
1x Tile 1×1 with Groove – Black 1x Tile 1×2 with Groove – Trans-Clear 1x
Plate, Round 2×2 with Rounded Bottom (Boat Stud) – Trans-Clear 1x Plate 2×2 –
Dark Bluish Gray 1x Plate 2×4 – Black
- Indicates components which include spares 3
Contents
Before You Begin
5
Blueprint
10
Instructions
12
Final Product
49
Troubleshooting
50
Contact
54
CONTENTS
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE 4
Before You Begin
Laying cables in between and underneath bricks
Cables can fit in between and underneath LEGO® bricks, plates, and tiles
providing they are laid correctly between the LEGO® studs. Do NOT forcefully
join LEGO® together around cables; instead ensure they are laying comfortably
in between each stud. CAUTION: Forcing LEGO® to connect over a cable can
result in damaging the cable and light.
BEFORE YOU BEGIN
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Connecting Cable Connectors To Expansion Boards
Take extra care when inserting connectors to ports of Expansion Boards.
Connectors can be inserted only one way. With the expansion board facing up,
look for the soldered “=” symbol on the left side of the port. The connector
side with the wires exposed should be facing toward the soldered “=” symbol as
you insert into the port. If a plug won’t fit easily into a port connector, do
not force it. Incorrectly inserting the connector can result in bent pins
inside the port or possible overheating of the expansion board when connected.
5
Before You Begin
Connecting Cable Connectors To Strip Lights
Take extra care when inserting connectors to ports on the Strip Lights.
Connectors can be inserted only one way. With the Strip Light facing up,
ensure the side of the connector with the wires exposed is facing down. If a
plug won’t fit easily into a port connector, don’t force it. Doing so will
damage the plug and the connector.
BEFORE YOU BEGIN
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Connecting Micro Cable Connectors To Micro Expansion Board Ports
Take extra care when inserting the micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is
similar to connecting lights and cables to Strip Lights. With the expansion
board facing up, ensure the side of the connector with the wires exposed is
facing down. If a plug won’t fit easily into a port connector, do not force
it. Use your fingernail to push the plastic part of the connector to the micro
port.
6
Before You Begin
Installing Bit Lights Under Lego® Bricks And Plates
When installing Bit Lights under LEGO® pieces, ensure they are placed the
correct way up (Yellow LED component exposed). You can either place them
directly on top of LEGO® studs or in between.
BEFORE YOU BEGIN
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE 7
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Before You Begin
The Symbols Used In This Guide
When going through the following guide you will come across symbols and
formats that will assist with the installation of your light kit. Take notice
of them as each has a specific purpose.
Light Kit Component
This is the most important image format as it indicates which part to use from
the Light Kit. Make sure you pay close attention to which part is shown.
White 30cm Bit Light
BEFORE YOU BEGIN
Connect
Used when you need to connect a LEGO piece or LMB component.
Disconnect
Used when you need to remove a LEGO piece/ section or LMB component.
Directional
Used to show where to route cables, place components, or move them.
Bend/Pivot
Used when a component needs to be bent, or part folded or pivoted.
Turn/ Flip
Will be found in the top left corner when the set needs to be rotated or
flipped.
Twist/ Braid
Seen when a set of cables need to be grouped and twisted together.
Power On Test
Found at the end of a major step to test the lights. Will be located in the
top left corner.
Note
Notes will be found alongside the instruction photos and explain what to do.
8
Before You Begin
Repeat Step
Repeat the previous step eg.
x2
Make a spotlight, then make a
second spotlight.
Connect Focus
Used to highlight a hard to see area where a component is being connected.
Disconnect Focus
Used to highlight a hard to see area where a component is being disconnected.
General Focus
Used to highlight a hard to see area where a component needs to be acted on.
BEFORE YOU BEGIN
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
General Note
This is a sample note that is used anywhere in this guide. It will explain a
difficult section where photos are hard to illustrate or easily confused.
Connect Note
The green coloured note is used when the topic focuses on a component being
connected, like the shown Power Bank.
Disconnect Note
The red coloured note is used when the topic focuses on a component being
disconnected or like here, the removed pieces.
NOTE
Take the 5cm Connecting Cable from the 4-Port Micro Expansion Board and route
it into the “IN” port of the Flicker Effects Board
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
NOTE
You should have these parts left over that were removed from the LEGO set
Removed Pieces 9
BLUEPRINT
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
BLUEPRINT
10
BLUEPRINT
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
BLUEPRINT
11
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
To ensure a smooth installation of your light kit, please read and follow each
step carefully. If you run into any issues, please refer to the online
troubleshooting guide.
INSTRUCTIONS
Wenn Sie Probleme mit Ihrem Light My Bricks-Set haben, sehen Sie sich unser
Video zur Fehlerbehebung an oder lesen Sie die Auflistung der häufigsten
Ursachen, die Ihnen bei der Fehlersuche helfen hier. Si vous rencontrez des
problèmes avec votre kit Light My Bricks, regardez notre vidéo de dépannage ou
consultez la liste des causes les plus fréquentes pour vous aider à les
résoudre ici.
Se si verificano problemi con il set Light My Bricks, guardare il nostro video
per la risoluzione dei problemi o leggere l’elenco delle cause più comuni per
la risoluzione dei problemi qui.
12
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
1
2
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
13
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
3
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
14
4
White 30cm Bit Light
Round Plate 1×1 – Trans Red
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
White 30cm Bit Light Round Plate 1×1 Open Stud – Trans
Orange
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
15
White 30cm Bit Light Round Plate 1×1 – Trans Red
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
5
White 30cm Bit Light Round Plate 1×1 – Trans Red
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
16
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
1
White 30cm Bit Light
White 30cm Bit Light
Round Plate 1×1 – Trans Clear
Round Plate 1×1 Open Stud – Trans Orange
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
17
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
6
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
18
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
7
7
INSTRUCTIONS
NOTE
Thread the bundled cables through the following gap
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
19
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
8
2 x 6-Port Expansion Board
5cm Connecting Cable
INSTRUCTIONS
NOTE
Connect the White 30cm Bit Lights to either Expansion Board
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
20
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
30cm Connecting Cable
NOTE
Take the other end of the 30cm Connecting Cable and thread it through the
following gap
9
15cm Connecting Cable
NOTE
Take the other end of the 15cm Connecting Cable and thread it through the
following gap
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
21
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
10
USB Power Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
11
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
22
!
12
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
23
13
White 15cm Bit Light
Round Plate 1×1 – Trans Clear
14
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
White 15cm Bit Light
Round Plate 1×1 Open Stud – Trans Orange
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
24
White 15cm Bit Light Round Plate 1×1 – Trans Clear
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
15
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
25
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
NOTE
Repeat this process for the opposite headlight
16
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
26
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
17
8-Port Expansion Board
NOTE
Connect the Headlight cables to the 8-Port Expansion Board
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
27
18
NOTE
Thread the 30cm Connecting Cable from the 6-Port Expansion Board at the center
of the vehicle through the following hole
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
NOTE
Wrap the cable around the hole until there is about 10cm excess cable
remaining
19
Cool White 15cm Bit Light
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
28
NOTE
Repeat this process for the opposite light
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE Plate 2×4 – Black
20
6-Port Expansion Board
5cm Connecting Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
29
2x Adhesive Square
21
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
30
2x Adhesive Square
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
22
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
31
!
23
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
24
NOTE
Take the 15cm Connecting Cable coming from beneath the car
6-Port Expansion Board
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
32
25
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE White 15cm Bit Light Tile 1×2 – Trans Clear
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
33
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Round Plate 1×1 Open Stud – Black
Tile 1×1 – Black
26
N/C Push Board
15cm Connecting Cable
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
NOTE
Connect the White 15cm Bit Light from the center console to the `OUT’ port of
the NC Push Board
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
34
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
NOTE
Position the NC Board exactly as shown – ensuring when the door is shut, the
trigger is pushed in
27
NOTE
Connect the 15cm Connecting Cable from the NC Push Board to the 6-Port
Expansion Board
15cm Connecting Cable
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
35
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
2x Adhesive Square
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
36
2-Port Expansion Board
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
28
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
NOTE
Ensure the light at the center console turns off when the is closed
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
!
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
37
29
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE White 15cm
Bit Light
Plate 2×2 W/ Rounded Bottom Trans Clear
Plate 2×2 – Dark Grey
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
38
30
N/C Push Board
15cm Connecting Cable
NOTE
Connect the 15cm Connecting Cable to the IN’ port of the NC Push Board NOTE Connect the White 15cm Bit Light to theOUT’ port of the NC Push Board
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
NOTE
Ensure when the back door is closed that the trigger on the NC Push Board is
pushed
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
39
31
2-Port Expansion Board
5cm Connecting Cable
6-Port Expansion Board
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE 2x Adhesive Square
15cm Connecting Cable
NOTE
Thread the 5cm Connecting Cable through the following gap
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
40
32
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Round Plate 1×1 Open Stud – Black
NOTE
Alternatively, if you are not attaching the roof rack, you can conceal the
cable and 2-Port inside
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
41
33
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS
NOTE
Ensure there are no visible cables dangling from the ceiling
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
42
34
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
NOTE
Ensure the ceiling light turns off when the back door is closed
35
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
!
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
43
36
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Cool White 15cm Bit Light
x4
37
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
44
8-Port Expansion Board
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Cool White 15cm Bit Light
38
x2
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
45
39
Round Plate 1×1 Open Stud – Black
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Round Plate 1×1 Open Stud – Black
NOTE
Repeat the process for the opposite light
2x Adhesive Square
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
46
40
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
5cm Connecting Cable
INSTRUCTIONS
NOTE
Secure the roof rack from the opposite side as well
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
47
41
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack
(sold separately)
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues in our
troubleshooting section.
NOTE
Reconnect the remaining pieces to the set
!
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
NOTE
You should have these parts left over that were removed from the LEGO set
Removed Pieces
INSTRUCTIONS
DISCONNECT
CONNECT
DIRECTIONAL
BEND / PIVOT
TURN / FLIP
TWIST / BRAID
POWER ON TEST
NOTE ICON
48
FINAL PRODUCT
This finally completes installation of the Light My Bricks LEGO® Land Rover
Classic Defender 90 Light Kit.
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
FINAL PRODUCT
49
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
TROUBLESHOOTING
Light My Bricks lighting kits contain individual components that are very small and can be easily damaged if not handled correctly.
To prevent unnecessary damage to components, we highly recommend that the User Guide section, “Important things to note” is read carefully. Follow the handling procedures in the User Guide to help prevent faults and damages to your Light My Bricks components.
If you are experiencing issues with your Light My Bricks set, watch our troubleshooting video or read on for a list of common causes to help you troubleshoot.
Wenn Sie Probleme mit Ihrem Light My Bricks-Set haben, sehen Sie sich unser
Video zur Fehlerbehebung an oder lesen Sie die Auflistung der häufigsten
Ursachen, die Ihnen bei der Fehlersuche helfen hier.
Si vous rencontrez des problèmes avec votre kit Light My Bricks, regardez
notre vidéo de dépannage ou consultez la liste des causes les plus fréquentes
pour vous aider à les résoudre ici.
Se si verificano problemi con il set Light My Bricks, guardare il nostro video
per la risoluzione dei problemi o leggere l’elenco delle cause più comuni per
la risoluzione dei problemi qui.
TROUBLESHOOTING
50
Troubleshooting
Firstly, ensure that the batteries have power using a battery charge gauge. If
the batteries have no power, replace the batteries. If the batteries still
have power, check to see if the batteries have been inserted correctly into
the battery pack.
TROUBLESHOOTING
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Check for AA batteries using the AA battery pack
Inside the battery pack are symbols indicating which direction the AA battery
should be inserted. The flat side of the battery should be paired with the
spring side of the battery pack. If the batteries have been installed
correctly and your kit still isn’t operating correctly, the next step is to
check the wiring.
51
Troubleshooting
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
Check Your Wires
In order for Light My Bricks components to fit in between and underneath LEGO®
bricks, the components need to be very small. Due to this nature, Light My
Bricks components can be easily damaged when not handled correctly.
Be careful when removing unpacked components out of the packaging and ensure
not to forcibly pull at the wires as this can damage the soldering that attach
the wires to the LEDs.
If the wiring is detached from the LED itself, the light will not operate.
When connecting lights to your LEGO® set, check that there are no pinched
wires underneath or in between bricks and plates. When the wires are pinched
and the exposed wires are touching each other, this can cause a crosswire and
the lights to not function correctly.
TROUBLESHOOTING
52
Troubleshooting
Check Your Expansion Board Ports/ Strip Light Ports / Effects Board Ports
It is important to note that connectors can only be inserted to the expansion
board, strip light, or effects board ports in one direction. Forcibly
inserting connectors in the incorrect direction will result in damaging the
pins inside each of the ports on your component board. Not only will a light
connected to the damaged port not work, but if the pins inside the port are
bent to a point they are touching each other, this can result in all other
lights in the system to stop working. This is a short circuit.
TROUBLESHOOTING
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
A short circuit can also result in overheating of the board, cable or
batteries. If you suspect a short circuit, DISCONNECT POWER IMMEDIATELY
Batteries can fail, catch fire, or even explode if left connected to a short
circuit for too long. If you suspect you have a faulty component due to a bent
pin, try the following steps: If you look carefully inside each of the ports,
each port contains 2 small pins that should be straight. You will be able to
identify a faulty port if it has any bent pins.
53
LEGO® LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE
CONTACT US
If you have an enquiry regarding the online shop, our products or a general
enquiry please refer to our Frequently Asked Questions webpage. Alternatively,
you can contact our Customer Services team by visiting our online support
portal.
support.lightmybrick.com
We thank you for purchasing this product and hope you enjoy!
TROUBLESHOOTING
54
lightmybricks.com
© 2022 Light My Bricks Pty Ltd – Head Office: 4/26 Rushdale Street, Knoxfield
VIC 3180, Australia. Phone: +61 420 643 543 | All Rights Reserved | Light My
BricksTM sell LED lighting kits only. All LEGO® sets featured in images are
sold separately. Light My BricksTM and the Light My Bricks logo, are
trademarks and copyrights of Light My Bricks Pty Ltd. LEGO® is a trademark of
the LEGO® Group of Companies which does not sponsor, authorise, or endorse
this document.
References
- LEGO Lights & Lighting Kits - Free Global Shipping | Light My Bricks – Light My Bricks USA
- lightmybrick.com - lightmybrick Resources and Information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>