BANG OLUFSEN Beosound Edge Wall Mount Instructions
- June 9, 2024
- bang olufsen
Table of Contents
BANG OLUFSEN Beosound Edge Wall Mount
BEOSOUND EDGE WALL MOUNT
It is
recommended to level out an uneven wall with the included spacers.
- Use the correct size and type of screws and wall anchors – taking into ac-count the construction and condition of the wall.
Use seven countersunk screws (ø 5 mm, 0.20″) and wall anchors in the holes matching the side where the wall bracket is placed – each screw with a mini- mum load rating of 100 kg (220 lbs).
Special notice about light partition walls: If you intend to hang the BeoSound Edge on a gypsum wall (also known as drywall or wallboard), the wall bracket must be fastened to a vertical stud.
The screws must penetrate the gypsum and be screwed a minimum of 65 mm (2.5″)
into a vertical stud.) 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>