aiwen MD1981-001 Ceiling Light Fixture User Manual
- May 15, 2024
- aiwen
Table of Contents
LED CEILING LIGHT
OPERATING INSTRUC IONS
Thank you for your purchase! Before install the product, Please read this
instruction carefully, and keep it for further reference.
PRODUCT PARAMETERS
| Category | Φ400*H125mm |
|---|---|
| Size | 42W |
| Wattage | LED Ceiling Light -Dimmable |
| Luminous flux | 4200lm |
| Color temperature | 3000-6000K |
| Input Voltage | AC 110V |
| Color rendering index | 280Ra |
| Working Temperature | -20∼55 °C |
| Lifespan | 30000H |
SAFETYTIPS
- The luminaires can only be installed and inspected by an authorized electrician.
- Do not touch when the lamp is llt.
- In the event of a malfunction, the power must be deactivated first! It should be specially maintained by an electrician or qualified personnel.
REMOTE CONTROL CODE MATCHING METHOD
-
Code Matching: When the lamp is powered on, long press ON within 3 seconds.
When the light flashes, the code matching is successful. Long press Group 1 ON, Group 2 ON, Group 3 ON respectively for grouping code matching. -
Code Clearing: When the lamp is powered on, long press OFF within 3 seconds.
when the lamp flashes, the code is cleared successfully. Long press Group 1 OFF Group 2 OFF, Group 3 0FF respectively for grouping code clearing. -
ALL ON/ALL OFF
ALL ON: Turn on all lights that have been coded.
ALL OFF; Turn off all lights that have been coded.
If you need to control one group of lights separately, you need to click ON of the group first.
NOTICE:
This remote control does not contain batteries.
Please insert 2×1.5V batteries before use.
| 1 | Turn On/ ALL ON | |
|---|---|---|
| 2 | Turn Off/ ALL OFF | |
| 3 | Brightness+ | |
| 4 | Brightness | |
| 5 | Color Temperature+ | |
| 6 | Color Temperature- | |
| 7 | Color Temperature Switch (3000K/4000K/6000K) | |
| 8 | Night Light Mode | |
| 9 | Timing: Auto turn off after 30 Mins | |
| 10 | NO 1 OFF | Match Group 1 |
| 1f | NO 2 OFF | Match Group 2 |
| 12 | NO 3 OFF | Match Group 3 |
-
Unpack your package and check the contents.
-
Unscrew the screws on the sides of mounting bracket.
-
Install the mounting bracket to the ceiling.
-
Connect wires from the receivers to house supply wires.
-
Turn ceiling plate counter lockwise until it locks in place, tighten bracket screws firmly.
-
Installation completed.