Universal Electronics UR2L-R803 Remote Control User Manual

: June 5, 2024
: Universal Electronics

Table of Contents

Universal Electronics UR2L-R803 Remote Control
Introduction
Replacing Batteries
Button Functions
Set-up Code Tables
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Universal Electronics UR2L-R803 Remote Control

Universal-Electronics-
UR2L-R803-Remote-Control-PRODUCT

Introduction

This remote control is designed to operate Cable boxes and TVs.

Replacing Batteries

Before you program or operate the remote control, you must install two new AAA alkaline batteries.
STEP1 Remove the battery com-partment cover from the back of your remote control.
STEP2 Check battery polaritycarefully, and install the batteries as shown in the illustration below.
STEP3 Replace the battery compartment cover.

Button Functions

Universal-Electronics-UR2L-R803-Remote-Control-
fig1

STEP2 Press and hold the [HOME] key for 5 seconds until the POWER LED will blink once and stays on. Continue to hold the [HOME] key and press the number key assigned to your brand in the Quick Set-up Code Table and release both [HOME] key and the number key to save the code. The POWER LED will blink twice to confirm that the code is stored.
STEP3 Point the remote control at the component.
STEP4 Press the power button. If it turns off, it is programmed for your component. If it does not turn off, use the Pre-Programmed 3-Digit code Method or Scanning Method.

Quick Set-up Code Tables TV

Quick Number	Manufacturer/Brand
0	SANYO
1	SONY
2	SAMSUNG
3	LG
4	TOSHIBA
5	PANASONIC
6	PHILIPS
7	HITACHI
8	SHARP
9	VIZIO

Manual Programming
The remote control can be programmed by entering a three-digit code number that corresponds to particular brands and models of equipment. The three-digit code numbers are listed in the code tables sections of this instruction manual.
STEP1 Turn on the equipment that you want the remote con-trol to operate TV. and the [OK/SEL] button simultaneously for 3 seconds. The POWER LED will turn on indicating that it is ready to be programmed. The LED will remain on for 30 seconds. The next step must be entered while the LED is on.
STEP3 Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.

Note: You can verify that you have selected the correct code by pressing the [POWER] button. The equipment should turn back on. Then try all of the functions on the remote control (i.e. volume, mute, etc.) to ensure you have the correct code. If any of the functions do not operate as they should, repeat the instructions from STEP 3 above using the next three digit code number from the brand list.

STEP4 Store the three-digit code by pressing the [HOME] button once again. The POWER LED will blink twice to confirm that the code has been stored.

Auto Search Method
If none of the three digit code numbers assigned to your brand of equipment works, or the code table does not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by following steps:

STEP1 Turn on the equipment that you want the remote control to operate TV.
STEP2 Press the [HOME] button and the [OK/SEL] button simultaneously for 3 seconds. The POWER LED will turn on indicating that it is ready to be programmed. The LED will remain on for 30 seconds. The next step must be entered while the LED is on.
STEP3 Press the [CH5] or [CH6] button one at a time or keep it pressed. The remote will emit a series of Power ON/OFF code signals. Release the [CH5] or [CH6] button as soon as the equipment turns off.

Note: You can verify that you have selected the correct code by pressing the [POWER] button. The equipment should turn back on. Then try all of the functions on the remote control (i.e. volume, mute, etc.) to ensure you have the correct code. If any of the functions do not operate as they should, repeat the instructions from STEP 3 above to continue the Auto Search Method.

STEP4 Press the [HOME] button to store the code. The POWER LED will blink twice to confirm that the code has been stored

The Learning Method

STEP1 Press the [POWER] button to be programmed and the [ # ] buttons simultaneously for 3 seconds until the LED light turns on.
STEP2 Point the remote at the other remote, head-to-head, 1 or 2 inches apart.
STEP3 Press the button on the remote that you want to teach a command to. For example, press the [MUTE] button to learn a command to the [MUTE] button.
STEP4 Press and hold the button on the other remote that corresponds to the command you want to teach until the LED light blinks twice.

Note : The LED will blink 5 times if there was an error in the learning process. Repeat STEPS 3 and 4 if this occurs. Continue learning other buttons by repeating.

STEP5 Once you have completed teaching the remote all desired commands for the componet, save the learned commands by pressing the [POWER] and [ # ] buttons simultaneously until the LED blinks 3 times. Now test all of the buttons to make sure they operate correctly.

ERASING A SINGLE LEARNED COMMAND

STEP1 Press the [POWER] and [ # ] buttons simultaneously for 3 seconds until the LED light turns on.
STEP2 Press and hold the button you want to erase for 3 seconds. The LED will blink twice to confirm the erasure.
STEP3 To exit, press and hold both the[POWER] and [ # ] buttons simultaneously until the LED blinks 3 times.A

ERASING ALL LEARNED COMMANDS FROM ONE DEVICE

STEP1 Press the [POWER] and [ # ] buttons simultaneously for 3 seconds until the LED light turns on.
STEP2 Press and hold both the [POWER] button you want to erase and the [PAUSE] button for 5 seconds. The LED will blink twice to confirm the erasure.
STEP3 To exit, press and hold both the [POWER] and [ # ] buttons simultaneously.

PROGRAMMING VOLUME CONTROL

By default, the VOL+, VOL- and MUTE keys operate through your TV. If you would like those keys to operate those functions on a different device, follow these steps.
STEP1 Press the [OK/SEL] button and [POWER] button simultaneously for 3 seconds. The POWER LED will turn on for 30 seconds. The next step must be performed while the LED is on.
STEP2 Press the [VOL+] button. The POWER LED will blink.
STEP3 Press the [HOME] or [POWER] button corresponding to the device that you would like the volume and mute buttons to control. The POWER LED will blink twice to confirm the programming.

Note: If you wish to have the volume and mute keys operate your Cable Box, press the [POWER] button in Step 3. Operate your TV, press the [HOME] button in Step 3.

MEMORY LOCK SYSTEM
This remote control is designed to retain programmed memory for 10 years — even after batteries are removed from the remote control.
For additional information about your remote control, go to www.universalremote.com

Set-up Code Tables

Manufacturer/Brand	Set-Up Code Number
ADMIRAL	072 081 160 161 096
AD NOTAM	672
ADVENT	147 224
AFFINITY	680
AIWA	238 141 145
AKAI	031 070 146 004 148 124 226 104 108 615
AKIO	103
ALARON	028
ALBATRON	253
AMARK	112 127
AMERICA ACTION	043
AMERICAN HIGH	236
AMPRO	073 167 245
ANAM	043 054 056 080 112 236
AOC	058 070 004 112 616
APEX	572
APEX DIGITAL	015 150 036 037 424
AQUAVISION	164 686
ASTAR	164
AUDIOVOX	076 103 043 035 224 228 078
Avera	761
AVION	223
AUVIO	689
AXESS	711
AXION	043
BAYSONIC	043
BELL&HOWELL	072
BENQ	600
BRADFORD	043
BROKSONIC	231 252 096 170
BYDESIGN	254
CAIRN	162
CANDLE	070 002 003 004
CANON	236
CAPEHART	058
CARVER	164
CELEBRITY	001
CETRONIC	043
CIELO	101
Ciil	732
CINERAL	103 120
CITIZEN	070 002 003 004 101 103 127
CLASSIC	043
COBY	640 641 671 004
CONCERTO	004
CONTEC	043 051
Continu-us	161 746 747
CORONADO	127
CRAIG	043 054 028 239
Manufacturer/Brand	Set-Up Code Number
---	---
CROSLEY	164
CROWN	043 127
CURTIS MATHES	070 004 101 127 236 011 072 081 120 164
CXC	043
DAEWOO	076 103 112 004 127 016 043 044 125 120

235 249

151 153 154 231 236 238 247 252 168 121

514

056 074 155 232 233 236 239 245 081

120

GEM| 031
GIBRALTER| 004 073
GO VIDEO| 239
GOLDSTAR| 004 106 112 127 247 250
GPX| 256 674
GRUNPY| 028 043
H&B| 046
HAIER| 004 116 623 749
HALL MARK| 004
HANNSPREE| 099
Manufacturer/Brand| Set-Up Code Number
---|---
HARLEY DAVIDSON| 028
HARSPER| 220
HARMAN KARDON| 164
HARVARD| 043
HISENSE| 198 021 619 630 004 749
HITACHI| 011 007 009 004 072 010 012 023 075 127

158 236 238 587 613 614 749

604 617

INSTANTREPLAY| 236
INTEQ| 073
JBL| 164
JCB| 001
JCL| 236
JCPENNEY| 004 008 024 030 065 070 101 127 160

234 236 239 247

JENSEN| 013
JVC| 038 001 034 083 195 236 242 159 227 581

668

741

164 094 160 056 236 238 243 205 028 138

168 035 211 077 050 218 594

MAJESTIC| 072
MARANTZ| 164 070 236 243 182 584
MARTA| 247
MATSUI| 164
MATSUSHITA| 080
MAXENT| 165
Manufacturer/Brand| Set-Up Code Number
---|---
MEGAPOWER| 253
MEGATRON| 004
MEI| 236
MEMOREX| 004 007 072 234 236 238 245 247 028 096
METZ| 088
MGA| 024 070 004 042 239
MIDLAND| 073
MINERVA| 088
MINTEK| 077
MINUTZ| 008
MITSUBISHI| 109 024 042 004 040 146 028 232 255 081

200 450 550

MONIVISION| 253
MOTOROLA| 081
MTC| 070 004 062 101 238 239
MULTITECH| 238 043
NAD| 015 025
NEC| 070 130 134 040 056 007 019 024 004 182

140 575 717

524 624 607 664 801

PEERLESS-AV| 723 763
PENTAX| 236
PHILCO| 070 003 004 024 056 059 060 063 064 127

164 236 238 243

PHILIPS| 164 005 093 038 127 070 003 004 059 236

238 243 247 199 218 144 161 594 773

PILOT| 247
PIONEER| 023 025 135 176 004 018 070 183 191 208

214 182 660

PLANAR| 728 742 787 788
POLAROID| 015 024 031 046 086 092 097 224 228 006

110 026 118 119

PORTLAND| 004 127 103
PRISM| 034
PRIMA| 147 164
Manufacturer/Brand| Set-Up Code Number
---|---
PROSCAN| 144 160 161 167 004
PROTON| 004 058 127 171 173 193 163
PROTRON| 102 213 004 115
PROVIEW| 110
PROX| 572
PYLE| 257
PYLE HOME| 661 662
QUASAR| 034 056 234 236 244 606
RADIO SHACK| 004 019 127 043 250
RCA| 160 161 144 065 070 004 023 024 056

074 152 232 233 236 238 239 081 588 713

REALISTIC| 007 019 236 238 239 247
REVOLUTION HD| 220
RICO| 241
RUNCO| 072 073 130 179 180 181 182 216 194 697

696

SABIO| 161
SAMPO| 070 004 058 165
SAMSUNG| 192 089 004 101 127 133 160 105 070 237

239 184 185 461 578 655 774 775 776 777

778 779 780 781 782 783

238 247 052 164

684 692 735

SHERWOOD| 129 128
SIGNATURE| 072 238
Silo| 001
Skyvue| 744
SKYWORTH| 164 895
SOLE| 177 178
SONY| 001 608 651 126 139 236 240 241 602
SOUNDESIGN| 003 004 028 043 238
SOVA| 004 169 174
SOYO| 163
SPECTRICON| 112
SPECTRONIQ| 004
SQUAREVIEW| 052
SSS| 004 043
STARLITE| 043
SUNBRITE| 608 001 635 605 772
Manufacturer/Brand| Set-Up Code Number
---|---
SUPERSCAN| 168
SUPRE MACY| 002
SUPREME| 001
SV2000| 168
SVA| 046
SYLVANIA| 070 003 052 059 060 063 064 127 160 164