Universal Electronics LED BATHROOM MIRROR User Manual
- June 4, 2024
- Universal Electronics
Table of Contents
USER MANUAL
LED BATHROOM MIRROR
INSTALLATION GUIDE
PACKAGE CONTENTS
| Piece | Description | Quantity | Piece | Description | Quantity | |
|---|---|---|---|---|---|---|
| a | LED Mirror | 1 | d | Brackets | 1 | |
| b | Wire Connector | 1 | e | Working Gloves | 1 | |
| c | Wall Anchors & Screws | 4 |
TOOLS REQUIRED
MIRROR DIMENSIONS
IMPORTANT SAFETY INSTRUCTIONS
Pre-Installation
PLANNING INSTALLATION
Compare all parts with the part listed in the package contents section if any
part appears missing or damaged. Do not install and use this light. Contact
customer service.
WARNING: RISK OF ELECTRICAL SHOCK
- Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
- Turn off the power when you perform any maintenance.
- Please verify that the supply voltage is correct by comparing it with the luminaire label information.
- Make all electrical and grounded connections under the National Electrical Code, and any applicable local code requirement.
- All wiring connections should be capped with UL-approved wire connectors.
CAUTION: RISK OF INJURY
- Wear gloves and safety glasses when removing luminaire from the carton, installing, servicing or performing maintenance.
- Avoid direct eye exposure to the light source while it is on.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Mirrors are heavy. Get assistance lifting the unit. This installation is most straightforward when performed by two people.
WARNING: RISK OF BURN
- Allow fixture to cool before handling. Do not touch the enclosure or light source.
- Follow all lamp manufacturer’s warnings, recommendations, and restrictions for driver type, burning position, mounting locations/methods, replacement, and recycling. CAUTION: RISK OF FIRE
- Keep combustible and other materials that can burn away from the luminaire and lamp/lens.
ELECTRIC CONNECTIONS
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICE NC ED ELECTRICIAN
WARNING: Shut off power before wring the mirror.
WARNING: An Electrical option mirror must be wired to a 20 Amp GFI
(Ground Foult Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
WARNING: This mirror must be connected to a grounded, metal permanent
wiring system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
mirror.
CAUTION: Requires 120 VAC 20 Amp 6FI protected circuit. 
INSTALLATION INSTRUCTIONS
Color Temperature Adjustment:
Dimming:
• You can freely adjust the brightness of the light by long
pressing.
Defog function:
Memory function: Set the brightness and color temperature you want, after
1 Os, it will keep your setting. When restart the next time, it returns to the
previous state of use.
Wall switch control: You can turn on or off the mirror led light by a
wall switch.
Touchless control: You can turn on the LED night light when close to the
radar sensor less than 100-150CM, the LED night light will be turned off after
30-60s when keep away from the sensor
Energy saving function: All LED lights will be turned off one hour later
automatically if you forget to close them.
Specifications:
| Size | 32″*24″ | 36″28″ | 40″*24″ | 60″*28″ |
|---|---|---|---|---|
| Wattage | 70W | 70W | 70W | 105W |
| Connection | Hard-Wiring | |||
| --- | --- | |||
| Mounting Way | Vertical or horizontal | |||
| Color Temperature | 2700-6000K | |||
| Switch Type | Touch On/Off | |||
| Voltage | 110V-130V | |||
| Light Color | Warm white/Natural white/Cool white | |||
| Memory Function | Yes | |||
| Defog Function | Yes | |||
| CRI | >95 |
Warranty:
30 Days Money Back Guarantee:
We offer a 30 days satisfaction guarantee. If you’re unsatisfied for any
reason, don’t hesitate to contact us for a full refund. For non-quality-
related issues, the customer will need to pay the return shipping costs.
2-Year Warranty for Quality-Related Issues:
Customers can contact us for a refund or replace your product if there are
defective due to faulty materials, craft, or function within one year of
purchase or delivery.
- Damage is caused by not carrying out the recommended appliance maintenance.
- Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation, or handling of the appliance are not by our operating manual.
- Use of the device for anything other than regular domestic household purposes.
- Faulty installation.
If you are in any doubt as to what is covered by your guarantee, please contact us.