ACEMINING B01C0H0000 Door Stop Alarm Instructions
- June 17, 2024
- ACEMINING
Table of Contents
Door Stop Alarm Instructions
B01C0H0000 Door Stop Alarm
Please contact [email protected] for any questions or return/refund.
Operation:
- This alarm is operated by a 9V battery.
- Open the battery door on the back side of the alarm unit, and place a 9V battery in the battery compartment. Make sure the battery is installed correctly before use.
- After installing 9V battery,place the doorstop alarm behind a closed door to secure the room.
- If the secured door is opened,the edge of the door will press down on the wedge plate of doorstop alarm and set off the alarm , Which will sound at 120dB siren continuously.
- The sensitivity of the vibration sensor can be adjusted from low to high as indicated in order to meet your needs. When the siren starts to sound weak,it is time to change the 9V battery as described in step 2.
- Turn the power switch off when the doorstop alarm is not in use.The alarm unit can be used as a doorstop to prevent the doorknob from hitting the wall if the hinged door is opened too roughly.
WSJ Product LTD
Unit 1 Alsop Arcade L3 5TX brownlow hill, Liverpool, GB
United Kingdom
E-mail:[email protected]
UE
Fast Refund GmbH
Friedrich-Alfred-StraRe 184 Duisburg47226
Deutschland
E-mail: [email protected]
Read User Manual Online (PDF format)
Loading......