UNIVERSAL ELECTRONICS R317945A07-00001 OFA Streamer Remote User Guide
- June 6, 2024
- Universal Electronics
Table of Contents
Universal Electronics Inc.
OFA Streamer Quick Reference Guide
| OFA (One For All) | R317945A07-00001 |
|---|
ACTIVATING RF
There is no specific host device, but the remote will communicate with an app
running on iOS or Android. The app will be used in the setup of the remote,
and will also keep an up-to-date version of the Device Status table.
This product shall support the following features:
- Auto Setup
- Manual Setup
- Optimized Setup Maps (OSM)
The following are descriptions of the Quickset features: Auto Setup: Quickset
allows for the auto setup of the RCU by identifying devices connected through
the HDMI network. The RCU is programmed automatically over the RF link.
Manual Setup: Quickset allows for manual selection of a Brand for
programming of devices without having to go through Auto Detection and
Programming. The RCU is programmed automatically over the RF link.
Optimized Setup Maps : OSM assists the user with a UI flow to program a
TV or Audio device in the RCU. After the user selects a brand through the UI,
the RCU software and Quickset allow for the testing of functions by the user.
The RCU is programmed over the RF link after the appropriate feedback is
observed by the user.
Features:
‐ UEI UE878, 512K Flash, 64K RAM NMEH
‐ BLE
o BLE 5.0
o HID over GATT (HOGP)
o Battery Service
‐ UAPI
o OTA over UAPI
‐ IR
‐ Quickset
o One Touch View
‐ Auto-detection and set up of devices via an app
‐ Activity Control x3
‐ Device Status feature to ensure optimum control
‐ App shortcut Macros
‐ Shifted Backlight of digit keys
‐ Key editing via app
‐ IR Learning via app
‐ Full Backlight
‐ OTA Update
‐ Battery Type: 2x AAA alkaline
‐ Operating Temperature
o 0°C to +50°C
Customer Marking Label
Caution
Please read all safety instructions to ensure personal safety and prevent damage to equipment.
Warning
- Do no put remote in a fire
- Do not disassemble the remote control
- Disposal of the remote control
Disposal of Old Electrical & Electronic Equipment (Applicable In the European Union and other European countries with separate collection systems)
- Risk of explosion if the battery is replaced by an incorrect type
- the battery shall not be exposed to excessive heat such as sunshine, fire or the like
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or leakage of flammable liquid or gas
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas
Important Safety Instructions
- Read these instructions
- Keep these instructions
- Head all warnings
- Follow all instructions
COMPLIANCE WITH FCC RULES AND REGULATIONS
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and if not used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase or decrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced remote control/ TV technician for help.
This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user’s authority to operate this equipment.
FCC Authorization Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC ID: MG3‐R317945
Documents / Resources
|
UNIVERSAL ELECTRONICS R317945A07-00001 OFA Streamer
Remote
[pdf] User Guide
R317945, MG3-R317945, MG3R317945, R317945A07-00001 OFA Streamer Remote,
R317945A07-00001, OFA Streamer Remote
---|---