CRYSTORAMA NIL-70016-BFMG Niles Six Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA NIL-70016-BFMG Niles Six Light Chandelier
Product Information
- Brand: Crystorama
- Model Number: NIL-70016-BFMG
- Part Number: A-M (as listed above)
- Fixture Type: Damp rated chandelier
- Usage: Indoor and outdoor
- Bulb Requirement: 6 Candelabra Base Bulb, 40 Watts recommended, 60 Watts Max (LED bulbs recommended for extended use)
- Dimensions:
- Chain Length: 72 inches
- Top Stem with Loop Length: 6-3/4 inches
- Center Stem Length: 2-3/4 inches
- Bottom Stem Length: 11 inches
- Glass Shade Length: 6-5/8 inches
- Socket Ring Length: 4-3/8 inches
- Socket Length: 3-1/2 inches
- Light Cluster Diameter : 5-7/8 inches
- Warning: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Usage Instructions
- Turn off the power before installing any electrical component.
- Rotate fixture arms up 90 degrees into position.
- Slip the center rod assembly along wire and thread onto the nipple located on the top of the light cluster.
- Determine the preferred hanging height and adjust to the chain required.
- Install the fixture onto the outlet box.
- Install the glass shade and spacer over the socket, and secure with the socket ring by using the provided wrench.
- Install the bulb (not included) into the socket.
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
How to install
- Rotate fixture arms up 90 degrees into position as shown.
- Slip the center rod assembly along wire and thread onto the nipple located on the top of the light cluster.
- Determine the preferred hanging height and adjust to the chain required.
- Install the fixture onto outlet box.
- Install the glass shade and spacer over the socket, and secure with the socket ring by wrench.
- Install the bulb(not included) into the socket .
DIMENSION
Part Numbers
- A. (1)-Mounting hardware
- B. (1)-Canopy W5-7/8’’xH1-1/8’’ #XRF70014BFMGCAN5.8IN
- C. (1)-Collar ring
- D. (1)-Collar loop
- E. (1)-Chain -72’’, 4mm thick #XRF70014BFMGCHA4MM F. (1)-Top stem with loop L6-3/4’’ #XRF70015BFMGTOSTEM6.75IN G. (1)-Center stem L2-3/4’’ #XRF70014BFMGCESTEM2.75IN
- H. (1)-Bottom stem L11’’ #XRF70014BFMGBOSTEM11IN I. (1)-Wrench
- J. (6)-Socket ring
- K. (6)-Spacer
- L. (6)-Glass shade #XRF70012BFMGGLA6.6IN
- M. (6)-Socket
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>