Danby DDY060WDB 13.2 lb (6.0 kg) Capacity Portable Dryer Owner’s Manual

OWNER’S MANUAL

Welcome to the Danby family

We are proud of our quality products and we believe in dependable service. We suggest that you read this owner’s manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting, and maintenance tips to ensure the reliability and longevity of your appliance.
You are entitled to the warranty coverage as described in the owner’s manual provided with your new appliance.

1. Please write down your appliance information below. You must keep the original proof of purchase receipt to validate and receive warranty services.
2. Register your product online and receive a FREE 2 MONTH WARRANTY EXTENSION  after filling out a product survey, at www.danby.com/support/product-registration

Model Number: ____
Serial Number: ____
Date of Purchase:

Need Help?

1. Read your Owner’s Manual for installation help, troubleshooting, and maintenance assistance.
2. Visit www.Danby.com to access self-service tools, FAQs, and much more by searching your model number in the search bar.
3. For the Quickest Customer Service, please fi ll out the web form at www.danby.com/support. Your submission will go directly to an expert on your particular appliance. Our average response times are between 20 minutes and 2 hours, during EST business hours.
4. Call 1-800-263-2629 – please note that during peak hours, hold times can exceed one hour

**** Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

IMPORTANT WARNING
DANGER: Risk of child entrapment. Before throwing away an old appliance:

• Remove the door or lid.
• Leave the shelves in place so that children cannot easily climb into the appliance

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.
This appliance is equipped with a cord that has a grounding wire with a grounding plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a standard 2-prong wall outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.
WARNING – Improper use of the grounding plug can result in a risk of electric shock. Consult a qualifi ed electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
DO NOT USE AN EXTENSION CORD
Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord.
If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid a hazard

SAFETY REQUIREMENTS

Ensure that component parts are replaced with like components and that servicing is done by factory authorized service personnel, to minimize the risk of possible ignition due to incorrect parts or proper service.
This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not place items exposed to cooking oils in the dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fi re. To reduce the risk of fi re due to contaminated loads, the final part of a tumble dry cycle occurs without heat as a cool down period. Avoid stopping the dryer before the end of the drying cycle unless items can be immediately  removed and spread out to allow the accumulated heat to dissipate

Items that have been soiled with oil products can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fi re. Piling, stacking or storing items that have been soiled with oil can prevent heat from escaping and create a fi re hazard.

SAVE THESE INSTRUCTIONS

• Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
• Do not reach into the appliance if the drum is moving.
• Do not install or store this appliance where it will be exposed to the weather. This appliance is not intended for use outdoors.
• Do not tamper with the controls.
• Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.
• Clean the lint screen before and after each load.
•  Keep the area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.
• The interior of the appliance and exhaust duct should be cleaned periodically by quality ed service personnel.
• Do not place the appliance or power cord near heat sources such as radiators, heaters, air ducts, or direct sunlight. Do not place open flames such as candles on or near the appliance.
• Do not block any ventilation openings. Ensure that vents are not covered by newspapers, tablecloths, curtains, carpeting, etc.
• Do not run the power cord under floor coverings. Keep the power cord away from high traffi c areas where it can become a tripping hazard.
• Do not misuse the power cord. Never carry or pull the appliance by the power cord. Never pull the power cord to unplug it from the outlet, instead, grasp the plug and pull it to remove it from the outlet.
•  Do not operate the appliance if it has a damaged power cord or plug. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualifi ed persons in order to avoid hazards.
• Do not attempt to repair, disassemble or modify the appliance. The warranty becomes void if the unit is not serviced or repaired by qualified personnel. There are no user-serviceable parts inside.
• Do not overload the appliance.
•  ensure foreign objects do not fi nd their way into the appliance. Remove all objects from pockets such as lighters, matches, hairpins, coins, etc.
• The door window may be hot after a long drying cycle. Ensure that children are kept away from the appliance.
• If the dryer is not wall mounted, ensure that it is placed on a fl at, fi rm surface in a dry, well-ventilated place. Use the adjustable front legs to assist in leveling the appliance if necessary.
• Do not place the appliance on any soft material such as foam, plastic, or carpeting.
• After turning the power off, wait 2 minutes before attempting to turn the unit back on.
• Remove the transport packaging from the back of the unit before fi first use.
• This unit must be exhausted to the outside. The exhaust air must not be discharged into a flue that is used for exhausting fumes from other appliances that are burning gasoline or other fuels.
• Do not install this appliance behind a lockable door, a sliding door, or in such a way that opening the dryer door is restricted. Do not install in a tight fitting cabinet.

INSTALLATION INSTRUCTIONS

FEATURES

LOCATION
Before you install the dryer, select a location with the following characteristics:

• A hard, level surface. Do not place the dryer on carpeted floor.
• Away from direct sunlight. Direct sunlight may affect the acrylic coating, plastic and electrical components.
• Adequate ventilation. Ventilation openings must not be obstructed.
• Away from sources of heat such as fi replaces or stoves.
• Make sure that the dryer does not stand on its power cord.
• There must be at least 10 cm (4 inches) of space between the dryer and any adjacent wall.

ROLLER INSTALLATION
Four rollers are included in the accessory bag that can be installed if the dryer will not be wall mounted or used with a stacking kit. Place the unit on its back or side. Use a screwdriver to remove the solid feet and then screw the rollers into the same holes.
If using the rollers, ensure the dryer is braced while in use so that it does not move and damage the installed hoses.

WALL MOUNTING KIT
A wall mounting kit is included with the unit so that the unit can be secured to the wall if necessary. We recommend using two people to complete the installation as the dryer can be heavy.
The wall mounting kit includes:

Tools required:

• one drill and 3 mm bit
• one Phillips head screwdriver
• four ɸ12 x 50 mm timber screws

Note:

• A minimum of 50 mm (2 inches) is required between the top of the dryer and the ceiling.
• If mounting above a washing machine, ensure there is enough space above the washing machine to fully open the lid and load or unload the appliance.
• This dryer is not designed to be placed directly on top of a washing machine or any other appliance.

Important: If you wish to install the dryer with a stacking kit, we strongly recommend only using the Danby Dryer with the Danby Laundry Stacking Kit and ensure that you follow all installation instructions that come with the Laundry Stacking Kit.

WALL MOUNTING INSTRUCTIONS

1. Determine where you would like the dryer
2. Securely affi x the hanging brackets to the wall.
   • The hanging brackets must be screwed into wall studs to ensure the installation is secure.
   • The hanging brackets must be placed no more than 56.3 cm (22.2 inches) apart.• If the wall studs are further apart than 56.3 cm (22.2 inches), you must install two braces on the wall, one to hold the hanging brackets and one to brace the plastic spacers.
   • Ensure the braces are screwed directly into the wall studs and then screw the hanging brackets to the brace.
   Important note: If the hanging brackets do not align with the wall studs we strongly recommend using a wood or metal brace that will allow at least two screws to be secured into the wall studs.

WALL MOUNTING INSTRUCTIONS

1. Install the exhaust connector on the back of the unit. The exhaust connector can be aimed in any direction that is convenient for your installation.
2. Using four 12mm screws, attach the plastic spacers to the rear of the unit. These spacers will minimize vibration and noise during operation.
3. With assistance, mount the dryer on the wall bracket.

OPERATING INSTRUCTIONS

CONTROL PANEL

Power: Press the Power button to turn the unit on or off. When the unit is turned on it will beep and the light above the Power button will illuminate. The default program setting is “Heavy Dry” and the default temperature is “High”.
Air Dry: The dryer will circulate at room temperature air for the fi rest of 150 minutes and then circulate hot air for the remaining 22 minutes of the cycle. This is an energy efficient cycle that is intended for delicate clothes or materials that cannot be exposed to excessive heat when cleaned.
Program: Press the program button to scroll through available program settings.

• Heavy Dry: The unit will run until the humidity level inside the drum has reached ≤ 35%. The maximum running time is 200 minutes.
• Normal Dry: The unit will run until the humidity level inside the drum has reached ≤ 40%. The maximum running time is 150 minutes.
• Quick Dry: The unit will run until the humidity level inside the drum has reached ≤ 45%. The maximum running time is 90 minutes.
• 1 hour: The unit will run for 60 minutes, 50 minutes on full power heating, and 10 minutes of air cooling. For this program, temperature selection is disabled.

Temperature: Press the Temperature button to scroll through available temperature settings.

• High: The dryer uses two sets of heating elements running simultaneously.
• Medium: The dryer uses two sets of heating elements for 10 minutes, then uses one set of elements for another 10 minutes, alternating back and forth for the duration of the program.
• Low: The dryer uses one set of heating elements.

Start/Pause: Press the Start/Pause button to start the drying program. The light above the Start/Pause button will illuminate to indicate that the program has started. While the unit is running, press the  Start/Pause button to pause the drying program. Press the Start/Pause button again to resume the selected program.
Lock: When the dryer is running, press and hold the Program and Temperature buttons at the same time for 3 seconds to lock the control panel. The light above the lock icon will illuminate to indicate that the control panel is locked. While locked, the buttons will not work if pressed. To unlock the control panel, press and hold the Program and Temperature buttons at the same time for 3 seconds.

Note: 1 Kg = 2.2 Lbs
Note: Drying times can be affected by many factors such as type of material, bulkiness, how full the dryer is, etc. The chart is mean

• The maximum capacity of the unit is 6 Kgs (13.2 Lbs) of dry textile material. Do not overload.

• It is recommended that items be added to the dryer one at a time to avoid tangling which can result in uneven drying.

• Check the pockets of all items to be dried, and ensure that foreign objects do not enter the unit such as lighters, hair pins, coins, etc.

• Turn items with zippers inside out and fasten all buckles.

• Dryer heat may permanently set stains, ensure all stains are removed prior to putting items in the dryer.

• Separate light and dark colored items to ensure the colors do not bleed.

• For best results load the dryer with similar fabrics.

• Delicate items should be placed into a nylon net bag prior to drying. Do not place underwire bras in a dryer.

• Do not add items to the dryer when it is in operation.

• If drying large items such as blankets or heavy loads of laundry, it is recommended that you periodically pause the program, open the dryer door, shake the large item or turn over the heavy load and then restart the drying cycle. This will ensure even drying.

• If the door is opened during operation and not correctly closed, an alarm will sound for 10 seconds. The alarm will pause for 6 minutes and then sound again for 10 seconds every 6 minutes until the door is closed. The appliance cannot function while the door is open. Once the door is closed, press the Start/Pause button to resume operation.
  OPERATING INSTRUCTIONS

• The maximum capacity of the unit is 6 Kgs (13.2 Lbs) of dry textile material. Do not overload.

• It is recommended e at a time to avoid tangling which can result in uneven drying.

• Check the pockets of all items to be dried, and ensure that foreign objects do not enter the unit such as lighters, hair pins, coins, etc.

• Turn items with zippers inside out and fasten all buckles.

• Dryer heat may permanently set stains, ensure all stains are removed prior to putting items in the dryer.

• Separate light and dark colored items to ensure the colors do not bleed.

• For best results load the dryer with similar fabrics.

• Delicate items should be placed into a nylon net bag prior to drying. Do not place underwire bras in a dryer.

• Do not add items to the dryer when it is in operation.

• If drying large items such as blankets or heavy loads of laundry, it is recommended that you periodically pause the program, open the dryer door, shake the large item or turn over the heavy load and then restart the drying cycle. This will ensure even drying.

• If the door is opened during operation and not correctly closed, an alarm will sound for 10 seconds. The alarm will pause for 6 minutes and then sound again for 10 seconds every 6 minutes until the door is closed. The appliance cannot function while the door is open. Once the door is closed, press the Start/Pause button to resume operation.

Prior to loading the dryer check that the items you are drying do not have the following symbols on them as items marked with these symbols should not be placed in a dryer:

**| CAUTION! HOT SURFACE
Do not touch the air intake during the drying cycle due to high temperatures.
---|---
| WARNING!**
To reduce the risk of fi re, this unit must be exhausted to the outdoors.

CARE & MAINTENANCE

Cleaning the lint filter
Unplug the power cord prior to any cleaning. The lint filter must be in place when the unit is running and should be cleaned before and after every load.

1. Removing the lint filter.
   • Remove the filter by gently pulling outwards on the center of the exhaust vent shroud.
   • The filter has three parts: exhaust vent shroud, lint filter, and exhaust filter.

2. Cleaning the lint filter.
   • Separate the three pieces of the filter.
   • Remove lint with a soft brush or vacuum cleaner.

3. Replacing the lint filter.
   • After cleaning, reassemble the exhaust vent shroud, the lint fi later, and the exhaust filter.
   • Ensure the filter assembly is firmly installed in the unit.

Cleaning the air intake filter
The air intake filter should be cleaned once a month. Remove the air intake filter by holding the upper and lower ends and pulling outward. Remove the filter and clean it with a soft brush. Reassemble and install in the unit.
Cleaning the interior and exterior
• Do not immerse any part of the unit in water.
• Do not use thinner, gasoline, or alcohol on or near the unit as the residue and fumes can cause a fire.
• Do not use any type of spray cleaner on the interior of the unit. If the drum becomes stained, clean it with a damp cloth.
• Remove any residue before drying the next load.
• Clean cabinet with mild soap and water. Do not use harsh or abrasive cleaners.

Note: The air filter is made to last and can be reused throughout the life of the appliance. However, if the air filter becomes damaged or torn, a replacement can be purchased by contacting consumerservice@Danby.com.

TROUBLESHOOTING

• The circuit breaker tripped or a blown fuse.
The dryer drum does not turn.| • The door is not fully closed.
• The power plug is unplugged.
• The outlet does not have power.
The laundry is not thoroughly dried.| • The lint filter or air intake filter are clogged.
• There is too much laundry in the dryer.
• Wet items were added during the drying cycle.
• The laundry has become twisted while drying.
• The dryer has been placed in a small or badly ventilated area.
• Dryer vent is blocked.

LIMITED “IN HOME” WARRANTY

This quality product is warranted to be free from the manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter
“Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts are warranted for thirty (30) days from the date of purchase, with no extensions provided.
First, 12 months During the first twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at the warrantor’s option, at no charge to the original purchaser.
To obtain service  Contact the dealer where the unit was purchased, or contact the nearest authorized Danby service depot, where service must be performed by a qualified service technician. If service is performed on the unit by anyone other than an authorized service depot, all obligations of Danby under this warranty shall be void.
Boundaries of in-home service
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an authorized service depot. Any appliance requiring service outside the limited boundaries of “In Home Service”, will be the consumer’s responsibility to transport at their own expense to the original point of purchase or a service depot for repair. If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center, it must be delivered to the nearest authorized Danby Service Depot by the purchaser.
Transportation charges to and from the service location are not protected by this warranty and are the responsibility of the purchaser.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS
Save as herein provided, by Danby, there are no other warranties, conditions, representations, or guarantees, express or implied, made or intended by Danby or its authorized distributors, and all other warranties, conditions, representations, or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1. Power failure.
2. Damage in transit or when moving the appliance.
3. An improper power supply such as low voltage, defective house wiring, or inadequate fuses.
4. Accident, alteration, abuse, or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions (ie. extremely high or low room temperature).
5. Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6. Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods, etc.
7. Service calls result in customer education.
8. Improper Installation (ie. Building-in of a free-standing appliance or using an appliance outdoors that is not approved for outdoor application, including but not limited to: garages, patios, porches, or anywhere that is not properly insulated or climate controlled).

Proof of purchase date will be required for warranty claims; retain bills of sale. In the event that warranty service is required, present the proof of purchase to our authorized service depot.

Warranty Service
In-home
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone:519-837-0920 FAX: 519-837-0449
1-800-263-2629
04/17
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840

www.Danby.com

References

• Danby® the Appliance Specialists | Canada
• Danby® the Appliance Specialists | Canada
• Customer Support | Danby Canada

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>