nedis BTLS20RGBW Smart Bluetooth USB LED Strip User Guide

**

**

nedis BTLS20RGBW Smart Bluetooth USB LED Strip

Intended use
This product is a Smart Bluetooth USB LED strip that can be controlled by smartphone.
The product is not intended for professional use.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Main parts

1.  USB cable
2. LED strip
3.  LED strip connector

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
•  Only use the product as described in this document.
•  Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
•  This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
•  Only use the provided power cable.
•  Do not expose the product to water or moisture.

Installing the app

1.  Download the Ned is Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3.  Create an account with your mobile phone number or your e- mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a Smartlife Home.
7.  Set your location, choose the rooms you want to connect with and tap Done.

Connecting the product

1. Align the arrow on the LED strip connector AC, to the +5V sign on the LED strip Af).
2. Plug AC, into A.
3. Plug the USB cable AO into a power source. A blinks.
4.  Enable Bluetooth on the device you want to pair.
5. Tap + in the top right corner.
6. Under Search Device, select the product from the list of available devices.
7. Rename the product after it has been found and added.

Setting up the product

1. Unplug AO from the power source.
2. Clean the surface from dust and grease.  The surface must be smooth. Do not place the product on knitted/wool fabrics, dust wall, rough plastic surface or frosted glass.
3. Remove part of the 3M tape from the back of A.
4.  Place the start of A in the desired position. Make sure the power source is within reach.
5. Unroll A.
6. Remove the 3M tape and press A into the desired position.
7.  Firmly press A down with your hand.

•  Do not use hard objects to press A down to prevent damage.
• Only fold/bend A around the cut lines to prevent damage to the components  If desired, cut A to size on the indicated cut lines. 8. Plug AO into a power source.

Controlling the product

1. Use the app to change modes, speed, LED colour, and LED brightness.

Declaration of Conformity
We, Ned is B.V. declare as manufacturer that the product BTLS20RGBW from our brand Ned is”, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation. The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/btls20rgbw#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC ‘s-Hertogenbosch, the Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>