SYLVANIA SP782 Karaoke Light-Up Bluetooth Speaker User Manual
- June 5, 2024
- SYLVANIA
Table of Contents
SYLVANIA SP782 Karaoke Light-Up Bluetooth Speaker
DEAR CUSTOMER In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference.
NOTE
This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.
Packing list
Upon opening the package, please check for the following items:
- 1 x Speaker
- 1 x USB charging cable
- 1 x Instruction manual
Do’s and Don’ts
- Do not play music at excessive levels as damage to hearing and/or equipment may result.
- Do not use outdoors in wet or in damp surroundings.
Specification
- Input: DC 5V
- Drivers: 2 x 8”Full Range
- FM: 87.5~108.0 MHz
- Battery Capacity: 1500mAh
- Transmission Distance: 10m
- Dimension: (WxHxD): 245x560x185mm
Product overview
- Power/VOLUME -&+
- Charging Indicator RED=Charging Light off = Fully Charged
- DC interface (5V)
- MODE/LED ON (Long press to turn on/off light; Lightly press to enter into selection for Bluetooth, FM Radio, AUX Input, USB,TF)
- Play/Pause/REC
- Next track
- Previous track/TWS
- AUX input
- TF/USB input
- MIC input
Playing recording function
- After the portable speaker is turned on, insert the TF Card or U disk to the TF slot or USB port, press the Mode button to the Bluetooth mode, connect it with your Bluetooth device and paly the music, long press the REC button around 3 seconds, you will here a prompt voice “ding” means the TF card/USB is starting recording, long press the play/pause button for 3 seonds again and you will here prompt voice”ding ding”, that means stop recording.
- If you want to play this recording sound, press the Mode button to the USB or TF card mode, press the next button to find out this song and play it.
Note :
- When your TF card and U disk insert to the speaker at same time , it will record to your U disk when recording.
- The recording only works in Bluetooth mode, can not record in FM, Aux mode and can’t record Microphone’s sound.
- It’s better to turn the Bleutooth devices volume to maximum during recording.
- It will be stopped recording when pressing the mode button during recording.
POWER SOURCE
- Please charge the unit at least 4 hours before first time using.
- Twist the dial clockwise/anticlockwise to switch on/off the unit.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights shows on the LED
display is red. After the battery has fully charged, the light turns off.
- Connect the USB charge cable to the DC5V interface of the speaker firmly.
- When the battery is fully charged, please disconnect the USB charge cable from the speaker.
- The speaker works normally when charging.
POWER/VOLUME
Twist the dial clockwise/anticlockwise to increase/discrease the volume. Twist
the dial clockwise/anticlockwise to power on or off the unit.
PREVIOUS/NEXT BUTTON
Under playing status, press
PREVIOUS/NEXT
button to get back to a previous or next song.
PAUSE/PLAY BUTTON
To stop playing the current track, please press PAUSE/PLAY button on the
control panel. Press it once again to continue playing.
MODE/LED ON
Long press to turn on/off light. Lightly press to enter into playing mode
selection(Bluetooth,FM Radio,AUX Input, USB,TF).
AUX IN JACK
- Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman,etc,then select AUX by pressing the MODE/LED ON button on the control panel .
- Play from an external audio device.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB directly for playing.
TF JACK
Insert TF card directly for playing.
FM FUNCTION
Lightly press MODE/LED ON button to switch to FM mode. Press PLAY/PAUSE button
on control panel for automatic searching and saving the radio stations, by
pressing PREVIOUS or NEXT you can select a previous or next radio station.
Bluetooth:
Short Press MODE/LED ON button on control panel to select Bluetooth mode.
Simultaneously turn the Bluetooth setting on your phone, tablet or any other
bluetooth enabled audio device and select “Syl SP782″(no need to match code),
the unit and device will then connected via Bluetooth. Press the “NEXT SONG”
and “PREVIOUS SONG” button on the control panel to select the song, press ”
PLAY/ PAUSE” button to control the playing status.
TWS: (True Wireless Speaker)
It needs two speakers to make a TWS. When you had two speakers, you can make a
TWS as below steps:
- Don’t connect to this speaker with Bluetooth devices.
- Turn on both speakers and press the mode button to change to Bluetooth mode.
- Press and hold the TWS button, the display shows ‘t on’ that means the TWS on and it will enter to pairing mode. It will have a tone coming out after both speakers connected together. (If you want to turn this TWS off, press and hold again, the display shows ‘t off’, It will be disconnected TWS connection).
- Turn the Bluetooth devices to search the Bluetooth name “Syl SP782″ and tap to connect it. It will have a tone coming out from this speaker after connected successfully.
- Now you can play the music form your Bluetooth devices.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
90 day Warranty
This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable orreturned to us. This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>