SYLVANIA SB0307 37 INCH BLUETOOTH SOUNDBAR WITH OPTICAL Instruction Manual

37 INCH BLUETOOTH SOUNDBAR WITH OPTICAL

MODEL: SB3713-OP

READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE. SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 8 ft. from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued operation, follow the attached installation instructions and use only shielded cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD. This unit has a long cord that can be easily tripped on or pulled on, causing injury. Please make sure it is arranged so that it will not drape over a tabletop, etc., where it can be pulled on by children or tripped over accidentally.

INDUSTRY CANADA CONFORMITY
CAN ICES-3 (B)/NMB-3(B)

Industry Canada Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISED RF Exposure statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the ISED radio frequency exposure limits, Human proximity to the antenna shall not be less than 20 cm (7.9 inches) during normal operation.

GENERAL SAFETY INSTRUCTIONS

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.

1. Read these instructions ­ All the safety and operating instructions should be read before the appliance is operated.
2. Keep these instructions ­ The safety and operating instructions should be kept for future reference.
3. Heed all warnings ­ All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions ­ All operation and use instructions should be followed.
5. Do not use this apparatus near water ­ The appliance should not be used near water; for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
6. Clean only with dry cloth ­ The appliance should be cleaned only as recommended by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades and a third grounding prong, which are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This appliance should not be exposed to dripping or splashing water and no object filled with liquids such as vases should be placed on the apparatus.
16. Power Sources ­ The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Do not overload wall outlet.
17. Battery should not be exposed to excessive heat such as sunshine, fire, etc.
18. Replace remote control battery only with the same or equivalent type.
19. Do not attempt to dismantle, open or repair this product yourself. If a problem occurs, seek advice from your local qualified service technician or contact the distributor at the telephone number at the back of this instruction manual.
20. Caution marking and nameplate are located on back or bottom of product.

PLACEMENT AND MOUNTING

Placing the device on table – Ventilation
When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard.

Mounting to a wall

1. Mounting to a wooden wall
   A. Mark the position of the mounting screws on the wall using a pencil.
   B. Drill the supplied screws directly into the marks that you have made on the wall and leave approx. 0.3 inch length to hook the sound bar.
   C. Put the sound bar onto the mounting screws. Make sure they are firm and stable.

2. Mounting to a brick wall
   A. Mark the position of the mounting screws on the wall using a pencil.
   B. Drill 2 holes on wall with a powerful electric drill.
   C. Insert the supplied fixing plug and hammer into the holes.
   D. Secure the supplied screws into the fixing plugs and leave approx. 0.3 inch length to hook the sound bar.
   E. Put the sound bar onto the mounting screws. Make sure they are firm and stable.

LOCATION OF CONTROLS:

Front View

RearView

Top View

REMOTE CONTROL

1. STANDBY button
2. VOL(Volume) – button
3. SOURCE button
4. BASS down button
6. TREBLE down button
5. PAIR button
7. EQ (Equalizer) button| 8. (Previous)/ TUNE- button
9. button
10. (Mute) button
11. VOL(Volume) + button
12. BASS up button
13. TREBLE up button
14. (Next) / TUNE + button
---|---

BATTERY (included)

• Before Using the Remote Control:
  Remove the plastic tab as picture on the right.>>>

• To Replace battery
  1. Push and slide out the battery holder.
  2. Replace the battery with a new CR2025 button cell as the polarity marking facing upward.
  3. Close the battery door.

Battery precautions

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the batteries in the device are consumed or device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s instructions.)
6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
7. Clean the battery contacts and also those of the device prior to battery installation.
8. Warning: Do not ingest battery, Chemical Burn Hazard.
   This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burn in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

GENERAL OPERATION

1. Connect the AC/DC adapter to the unit and wall outlet. The indicator will light up in red, which indicates the unit is powered on and enters the standby mode.

2. Press the Standby/Source button on the unit or the button on remote control to enter the play mode.

3. Press the Standby/Source button on the unit or the SOURCE button on the remote control repeatedly to switch to desired mode. The color of the indicator will turn to:
   Green……………………………………………………………….FM Radio
   Blue………………………………………………………………….Bluetooth
   Orange (green + red)………………………………………………AUX 1
   Indigo (green + blue)………………………………………OPTICAL IN
   Violet (blue + red)……………………………………………………AUX 2
   White (green + blue + red)………………………………………….USB

4. During Playback:
   ~ Press the VOL (Volume) + or – buttons on the unit or Remote Control to adjust volume level as desired.
   ~ Press the EQ button on the Remote Control repeatedly to select your desired EQ mode from MUSIC, TALK, MOVIE and STANDARD. Press and hold this button to return the default EQ mode (MUSIC).
   ~ Press the (Mute) button on the Remote Control to turn off the sound. Press again to resume. ~ Press the BASS +/- buttons on the Remote Control to adjust the sound level of bass.
   ~ Press the TREBLE +/- buttons on the Remote Control to adjust the sound level of treble.
   When the (Mute) button is pressed, the indicator will turn to white and blink rapidly to imply that the unit has received the specified command and answer it with the corresponding action. Press it again; the unit will turn back to normal state. When any of the other buttons on the unit/remote control mentioned here is pressed, the indicator on the unit will blink once and the unit will answer the command with the corresponding action.

5. When finished listening, press and hold the Standby/Source button on the unit or press the button on the Remote Control to power OFF the unit and put in standby mode.

FM RADIO OPERATION

Before listening to the radio, please unwind and extend FM antenna or relocate the unit to get better reception.

1. Power on the unit and enter the play mode as previously explained.
2. Press the Standby/Source button on the unit or the SOURCE button on the remote control repeatedly until the indicator turns Green.
3. Press and hold the VOL+ or VOL-/REC. button on the unit, or press the /TUNE+ or /TUNE- button on the remote control. When the indicator blinks, release the button. The unit will start to search for radio stations. Once a station is located, the unit will stop searching and start to play it. If you want another one, repeat the operation to start a new search.
4. Press and hold the FM Scan button on the unit or the on the remote control. When the indicator start to blink rapidly, release the button. Now the unit starts searching available bands and stores them automatically.
   After searching and storing finished, press repeatedly the FM Scan button on the unit or the button on the remote control to choose the desired station.

BLUETOOTH PAIRING AND CONNECTION

For first time use or re-pairing, pair the unit to an external Bluetooth (BT) device as follows:

1. Power on the unit and enter the play mode as previously explained.
2. Press the Standby/Source button on the unit or press the SOURCE button on the Remote Control repeatedly until the color of the Indicator turns to Blue.
3. Power on the external BT Device and select Bluetooth to enter into search mode. When SYLVANIA SB3713 appears from your devices list, click it to start pairing. After paired, the Blue Indicator will stop blinking. If the passcode doesn’t appear, see the instructions of the external BT device.
4. If you want to connect another BT device while playing, press “PAIR” Button on remote control to disconnect this pairing, then connect another BT device following above steps.

NOTE:

1. When the external BT Device searches the unit, The code “SYLVANIA SB3713” will appear on the display of the external BT device.
2. If the BT device asks for a password, input pairing code “0000” to confirm it to connect to “SYLVANIA SB3713”.

Normal operation after paired:

1. Power on the unit and select the playback source to BT as previously explained.
2. Turn on the BT function of the external BT Device.
3. Touch SYLVANIA SB3713 and wait a few seconds until the unit pairs to the external BT device automatically. The Blue indicator will stop blinking.
4. Play the music in the connected BT Device as usual.
5. During playback:
   ~ Press the /TUNE + or /TUNE – button to skip the tracks.
   ~ Press the button or the FM Scan button on the unit on the remote control to pause.
   Press again to resume normal playback.

AUX 1: LISTEN TO TV/DVD/VCR/DVR

An external Video/Audio player (such as TV, DVD player, VCR, etc.) can be connected to this unit and heard through the speakers.

1. Plug one side of RCA White and Red cable into the AUX 1 jacks on the rear of the unit.

2. Plug the other side of cable into Audio Out R & L jacks of the TV or external device as the illustration below.
   NOTE: Make sure to connect to AUDIO OUT. If you connect it into AUDIO IN of external device, you will not hear the sound.

3. Power on the unit and enter the play mode as previously explained.

4. Press the Standby/Source button on the unit or press the SOURCE button on the Remote Control repeatedly until the color of Indicator turns to Orange.

5. Power on the connected external player and start playback as usual.

OPTICAL DIGITAL AUDIO IN

1. Connect the Optical out jack from the external audio Player (including TV, DVD Player BD Player, etc.) to the OPTICAL IN jack on the back of unit by the Optical Connection Cable (not supplied) as the figure below: (For PCM format only)

2. Power on the unit and enter the play mode as previous explained

3. Press the Standby/Source button on the unit or press the SOURCE button on the Remote Control repeatedly until the Indicator turns to Indigo.

4. Power on the connected external player and start to play music as usual. Turn on the digital audio output and set it to PCM (Pulse Code Modulation) type as below:

AUX 2: LISTEN TO EXTERNAL AUDIO DEVICE

An external (Auxiliary) audio source (i.e., personal CD player or MP3 player) can be connected to this unit and heard through the speakers.

1. Plug one side of the Aux In cable into the AUX 2 jack on the rear of the unit.

2. Plug the other end of the Aux In cable into the socket of the external audio source.

3. Power on the unit and enter the mode as previously explained.

4. Press the Standby/Source button on the unit or press the SOURCE button on the Remote Control repeatedly until the color of Indicator turns to Violet.

5. Power on the connected external player and start playback as usual.

USB OPERATION

1. Insert the USB device to the USB Player port on the unit.

2. Power on the unit and enter the mode as previously explained..

3. Press the Standby/Source button on the unit or press SOURCE button on the remote control repeatedly until the color of Indicator turns to WHITE.

4. During the playback, you can press the button or the button on the remote control (or press and hold the Vol- or Vol+/REC. button on the unit) to play the next or the previous recorded track. Press the button on the remote control or the FM Scan button on the unit to pause or play again.
   NOTE:
   • The recorded tracks will be played first, then the music stored in the USB device.

RECORDING OPERATION

This unit has Recording function. Please insert a USB device first when using this function.

1. Power on the unit and enter the mode as previously explained.
2. Press the Standby/Source button on the unit or press SOURCE button on the remote control repeatedly to switch to desired mode.
3. When in playback, press and hold the Vol+/REC button on the unit or the Vol+ button on the remote control until you hear a prompt tone, which indicates the recording process starts.
4. To stop recording, press and hold the Vol+/REC button on the unit or the Vol+ button on the remote again. When hearing two beep tones, release the button.

NOTE:

• The recorded tracks will be stored in USB device automatically.
• To play the record tracks, press the Standby/Source button on the unit or press SOURCE button on the remote control repeatedly to switch to USB mode. It will start to play automatically.
• During the playback, you can press the button or the button on the remote control to play the next or the previous recorded track, or the button to pause or play again.
• The recording function only works in BT, AUX and Line in mode.

TROUBLESHOOTING GUIDE

to the unit or wall outlet.
The unit is in standby mode| Press the Standby/Source button on the unit or 6 button on the Remote Control to turn on the unit from
Standby mode.
No sound| Volume in minimum position| Raise volume level by pressing the VOL (Volume) + button.
The paired/connected device is not in playback mode| Play musiUmovie in the paired/connected device as usual and make sure the volume level of it is in high level.
Input source incorrect| Press the Slam:toy/Source button on the unit or SOURCE button on the Remote Control repeatedly to set the input source to the desired mode.
Sound distortion/rattle| Volume level too high| Reduce the volume level by pressing the VOL (Volume ) – button.
Reduce the volume level of the
paired/connected device.
Remote Control not working| The battery is weak| Replace with new battery.
Bluetooth reception failure| The external device is too far from the unit| Put the external BT device close to the unit.
Have not paired| Pair the unit with the BT Device as the procedures stated in this manual.

GENERAL SPECIFICATIONS

Power Input………………………………………………. ………..AC 100-240V~; 50/60Hz
Power Output……………………………………………………….. DC12V 2A
Audio Power………………………………………………………….. …………………….10Wx2
Bluetooth Effective Range in Open Area…………………………………..Up to 32 feet
Remote Effective Range…………………………………………………………Up to 16 feet
FM Frequency………………………………………………………………….. 87.5-108.0MHz

1 x AC/DC Adapter
1 x Remote Control
1 x Stereo Audio Connection Cable with 3.5mm stereo plugs
1 x RCA Cable
1 x User’s Manual
2 x Plastic Inserts (For wall mounting)
2 x Metallic Screws (For wall mounting)

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE

For service assistance and product information, please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3
www.curtisint.com

To make a warranty claim, please email support@curtiscs.com or call 1-800-968-9853.

90 day Year Warranty

This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.

References

• Curtis International - Affordable TVs, electronics and appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>