inventor KF2-860MS Upright Freezer User Manual
- June 5, 2024
- inventor
Table of Contents
inventor KF2-860MS Upright Freezer
Safety warnings
Warning :
-
risk of fire/flammable materials
This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar nonretail applications.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.)
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. -
DO not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
-
The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
Warning:
Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- Please abandon the refrigerator according to local regulators for it use flammable blowing gas and refrigerant.
- When positioning the appliance, ensure the supply cord is not trapped or damaged.
- Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
- DO not use extension cords or ungrounded ( two prong l adapters.
Danger:
Risk of child entrapment. Before you throw away your old refrigerator or
freezer:
- Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.
- The refrigerator must be disconnected from the source of electrical supply before attempting the installation of accessory
- Refrigerant and cyclopentane foaming material used for the appliance are flammable. Therefore, when the appliance is scrapped, ii shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.
- The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children and not in the vicinity of the refrigerating appliance, in order to prevent children from being locked inside .
For EN standard: This appliance can be used by children aged from 8 years and above and persons with reduce physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
- TO avoid contamination of food, please respect the following instructions:
- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Clean regularly surfaces that can come in contact with food and accessible drainage systems.
- Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days. (note 1)
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice-cream and making ice cubes. (note 2)
- One-, two- and three-star compartments are not suitable for the freezing of fresh food. (note 3)
- For appliances without a 4-star compartment: this refrigerating appliance is not suitable for freezing foodstuffs. {note 4)
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.
Note
1,2,3,4: Please confirm whether ii is applicable according to your product
compartment type.
For a freestanding appliance: this refrigerating appliance is not intended to
be used as a built-in appliance.
Warning:
To avoid a hazard due to instability of the appliance, ii must be fixed in
accordance with the instructions.
- Connect to potable water supply only. (Suitable for ice making machine)
To Prevent A Child From Being Entrapped, Keep Out Of Reach Of Children And Not In The Vicinity Of Freezer (Or Refrigerator). (Suitable for products with locks)
Meaning of safety warning symbols
-
Prohibition symbol
This is a prohibition symbol. Any incompliance with instructions marked with this symbol may result in damage to the product or endanger the personal safety of the user. -
Warning symbol
This is a warning symbol. It is required to operate in strict observance of instructions marked with this symbol; or otherwise damage to the product or personal injury may be caused. -
Note symbol
This is a cautioning symbol. Instructions marked with this symbol require special caution Insufficient caution may result in slight or moderate injury, or damage to the product. -
This manual contains lots of important safety information which shall be observed by the users.
Electricity related warnings
-
Do not pull the power cord when pulling the power plug of the refrigerator. Please firmly grasp the plug and pull out it from the socket directly.
-
To ensure safe use, do not damage the power cord or use the power cord when it is damaged or worn.
-
Please use a dedicated power socket and the power socket shall not be shared with other electrical appliances. The power cord should be firmly contacted with the socket or else fires might be caused.
-
Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line
-
Please turn off the valve of the leaking gas and then open the doors and windows in case of leakage of gas and other flammable gases.
-
Do not unplug the refrigerator and other electrical appliances considering that spark may cause a fire.
-
Do not use electrical appliances on the top of the appliance, unless they are of the type recommended by the manufacturer.
Warnings for using
-
Do not arbitrarily disassemble or reconstruct the refrigerator, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist
-
Damaged power cord must be replaced by the manufacturer, its maintenance department or related professionals in order to avoid danger.
-
The gaps between refrigerator door and cabinet is small, be noted not to put your hand in these areas to prevent from squeezing the finger. Please be gentle when close the refrigerator door to avoid falling articles.
-
Do not pick foods or containers in the freezing chamber when the refrigerator is running, especially metal containers in order to avoid frostbite.
-
Do not allow any child to get into or climb the refrigerator; otherwise suffocation or falling injury of the child may be caused.
-
Do not place heavy objects on the top of the refrigerator considering that objectives may fall when switching the door, and accidental injuries might be caused.
-
Please pull out plug in case of power failure or cleaning. Do not connect the freezer to power supply within five minutes to prevent damages to the compressor due to successive starts.
Warnings for placement
-
Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent damages to the product or fire accidents.
-
Do not place flammable items near the refrigerator to avoid fires.
-
The refrigerator is intended for household use, such as storage of foods; it shall not be used for other purposes, such as storage of blood, drugs or biological products, etc.
-
Do not store beer, beverage or other fluid contained in bottles or enclosed containers in the freezing chamber of the refrigerator; otherwise the bottles or enclosed containers may crack due to freezing to cause damages.
Warnings for energy
- Refrigerating appliances might not operate consistently (possibility of defrosting of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperatures for which the refrigerating appliance is designed.
- The fact that effervescent drinks should not be stored in food freezer compartments , and that some products such as water ices should not be consumed too cold;
- The need to not exceed the storage time(s) recommended by the food manufacturers for any kind of food and particularly for commercially quick-frozen food in freezer ;
- The precautions necessary to prevent an undue rise in the temperature of the frozen food while defrosting the refrigerating appliance, such as wrapping the frozen food in several layers of newspaper.
- The fact that a rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could shorten the storage life.
Warnings for disposal
- Refrigerant and cyclopentane foaming material used for the refrigerator are flammable. Therefore, when the refrigerator is scraped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.
- When the refrigerator is scraped, disassemble the doors, and remove the seal of the door and shelves; put the doors and shelves in a proper place, so as to prevent
trapping of any child.
Correct Disposal of this product:
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe
recycling.
Proper use of refrigerator
Placement
-
Before use, remove all packing materials, including bottom cushions, foam pads and tapes inside of the refrigerator; tear off the protective film on the doors and the refrigerator body
-
Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
-
Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.
-
The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust the wheel for leveling if unstable).
-
The top space of the refrigerator shall be greater than 30cm, and The refrigerator should be placed against a wall with a free distance more than 10cm to facilitate heat dissipation.
-
Precautions before installation:
Information in the Instruction Manual is only for reference. The physical product may differ. Before installation and adjusting of accessories, it shall be ensured that the refrigerator is disconnected from power. Precautions shall be taken to prevent fall of the handle from causing any personal injury.
levelling feet
Schematic diagram of the levelling feet
- ( The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)
Adjusting procedures:
- Turn the feet clockwise to raise the refrigerator;
- Turn the feet counterclockwise to lower the refrigerator;
- Adjust the right and left feet based on the procedures above to a horizontal level.
Door Right-Left Change
List of tools to be provided by the user
**| C r oss screw drive r|
**|
Putty knife
thin-blade screwdriver
****|
5/16″
socket and ratchet
| ****| Masking tape
-
Power off the refrigerator, and remove all objects from the door trays.
-
Fix the door by tape.
-
Unscrew screws of the top cover, Remove the top cover.
-
Unscrew screws of upper hinge. Remove the upper hinge.
-
Remove the door. Un screw screws of bottom hinge, Remove bottom hinge and levelling feet.
-
Fix the levelling feet, bottom hinge in the opposite side.
-
Assemble the door stopper and axle sleeve in the opposite side.
-
Put down the door on bottom hinge vertically. Fix the upper hinge, fix top cover of refrigerator.
Start to use
-
Before initial start, keep the refrigerator still for half an hour before connecting it to power supply.
-
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in summer when the ambient temperature is high.
-
Spare enough space for convenient opening of the doors and drawers or statement by the distributor.
Energy saving tips
- The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.
- Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
- Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.
- Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.
Structure and functions
Key components
( The
picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor )
Freezing chamber
-
The low temperature freezing chamber may keep food fresh for a long time and it is mainly used to store frozen foods and making ice.
It is the most energy efficient to place food in the position shown in the picture above. -
The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be consumed in short term.
-
Chunks of meat are preferably to be divided into small pieces for easy access. Please be noted food
shall be consumed within the shelf time.
Note:
Storage of too much food during operation after the initial connection to
power may adversely affect the freezing effect of the refrigerator. Foods
stored shall not block the air outlet; or otherwise the freezing effect will
also be adversely affected.
Temperature-control knob
- If the ambient temperature is too high or in summer, according to actual needs, the thermostat adjusted to 4.
- If the ambient temperature is too low or in winter, according to actual needs, the thermostat adjusted to 1.
- Recommended gear, Mid-range
Maintenance and care of refrigerator
Overall cleaning
-
Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving.
-
Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water f or diluted detergent.
-
The interior of the refrigerator should be cleaned regularly to avoid odor
-
Please turn off the power before cleaning interior, remove all foods, drinks ,shelves, drawers, etc.
-
Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and a quart of warm water. Then 9 rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before turning on the power.
-
For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary .combined with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterials accumulation in these areas.
-
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of the refrigerator or contaminated food.
-
Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted detergent. Dry with a soft cloth or dry naturally.
-
Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and then wipe dry.
-
Do not use hard brushes, clean steel balls, wire brushes, abrasives(such as toothpastes), organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may damage the cooler surface and interior. Boiling water
and organic solvents such as benzene may deform or damage plastic parts.
-
Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect electrical insulation after immersion.
-
Please unplug the refrigerator for defrost and cleaning.)
Defrost
-
Power off the refrigerator.
-
Remove the food from the refrigerator and place it properly to prevent food from melting.
-
Clear the drain pipe (to use soft materials to prevent damage to the liner), Prepare the water containers for defrosting.
(pay attention to clean the compressor compartment water draining tray, Avoding overflow to the ground). -
You can use the natural temperature for the natural defrost, you can also use the ice shovel to eliminate the frost (to use plastic or wooden ice shovel, for avoding damage to the liner or pipe)
-
You can also use the appropriate amount of hot water to speed up the defrost, with a dry towel to dry the water after defrosting.
-
After defrosting, put back the foods in cabinet , and power on the refrigerator.
Stop using
- Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for several hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into the appliance.
- Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odor.
- Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and seal them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during movement shall be no more than 45°.Do not hold the door and hinge when moving this unit.
- The appliance shall run continuously once it is started. Generally, the operation of the appliance shall not be interrupted· or otherwise the service life may be impaired
Trouble shooting
- You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department. Climate classes
Class| Symbol| Ambien t temperature range
---|---|---
Extended temperate| SN| +10to+32
Temperate| N| +16to+32
Subtropical| ST| +16to+38
Tropical| T| +16to+43
Extended temperate: ‘this refrigerating appliance is intended to be used
at ambient temperatures ranging from 1 O ‘C to 32 ‘C’;
temperate: ‘this refrigerating appliance is intended to be used at
ambient temperatures ranging from 16 ‘C to 32 ‘C’;
Subtropical: ‘this refrigerating appliance is intended to be used at
ambient temperatures ranging from 16 ‘C to 38 ‘C’;
Tropical: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 ‘C to 43 ‘C’;
Special for new European standard
The ordered parts in the following table can be acquired from channel_:
Ordered Part| Provided by|
Minimum Time Required for Provision
---|---|---
thermostats| Professional maintenance personnel| At least 7 years after the
last model is launched on the market
temperature sensors| Professional maintenance personnel| At least 7 years
after the last model is launched on the market
printed circuit boards| Professional maintenance personnel| At least 7 years
after the last model is launched on the market
light sources| Professional maintenance personnel| At least 7 years after the
last model is launched on the market
door handles| Professional repairers and final users| At least 7 years after
the last model is launched on the market
door hinges| Professional repairers and final users| At least 7 years after
the last model is launched on the market
trays| Professional repairers and final users| At least 7 years after the last
model is launched on the market
baskets| Professional repairers and final users| At least 7 years after the
last model is launched on the market
door gaskets| Professional repairers and final users| At least 10
years after the last model is launched on the market
- The shortest period for providing after-sales spare parts is _
Dear customer
-
If you want to return or replace the product, please contact the store where you buy.
(Remember to bring the purchase invoice) -
If your product breaks down which needs to repair, please contact after-sales service provider.
Activate your Warranty
Visit our web site and activate your warranty via the below link or by
scanning the QR code
https://www.inventorairconditioner.com/warranty-
inventor
-
Fill all the fields as shown below
-
Once the warranty submission has been completed a confirmation message will be sent to your email