teesa TSA8051 Ceramic Fan Tower Heater Owner’s Manual
- June 5, 2024
- teesa
Table of Contents
teesa TSA8051 Ceramic Fan Tower Heater
- Power button
- Visual imitation of fireplace button
- Temperature adjustment button
- Heating power button
- Oscillation button
- Timer button
- Visual imitation of fira place
- Temperature adjustment
- High heat mode
- Timer
- Low heat mode
- Rotation
- Fan mode
Thank you for purchasing TEESA appliance. Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.
SAFETY INSTRUCTIONS
In order to reduce the risk of injuries or damages, follow basic safety precautions applied when using any electrical device, including the following:
- Read this instruction manual carefully, even if you are familiar with the appliance. Keep the manual for future reference.
- Do not use the product for purposes different from displayed in this operating manual.
- Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
- ALWAYS turn off the device and disconnect it from the mains supply:
- If it’s not operating correctly
- If there’s an uncommon voice when using
- Before cleaning
- When not in use
- Note: during first use, the device may give off peculiar smell from heating and isolation elements it is a normal phenomenon.
- When you disconnect the power cord of the device, grasp and pull the plug, not the cord/ cable.
- Place the device on flat, stable and heat resistant surface.
- Use in upright position only, and do not leave unattended.
- Keep the device and its cord/cable away from heat, water, moisture, sharp edges and any other factor which may damage the appliance or its cord.
- Do not handle/use the device with wet or moist hands. Do not place it the device in water or any liquid, nor use it in humid or wet environments. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool! The device is not suitable for use in a bathroom.
- Do not use fan heater near flammables, explosives, varnish, glue or heat sensitive items.
- Do not cover or restrict inlet and outlet grilles (danger of overheating).
- Keep the air inlet and outlet free from obstacles; make sure there are no objects near the device within at least 1 meter range. Do not place it up against walls, furniture, curtains, etc. Place the device in a properly ventilated place.
- Do not use the heater to dry clothes.
- Do not use the appliance in rooms less than 4 m2 area.
- Do not use in dusty environments.
- When not in use store in clean, cool and dry area. Remember to cool the heater before storing.
- Keep the device out of the reach of children. Do not leave children unsupervised with the product.
- Protect the product from strong impact and mechanical stress.
- This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner, and all the safety precautions are understood and followed. Children should not play with this device. Children should not perform cleaning and servicing of the device unsupervised.
- Pay attention! The surface of this device may get hot; the air outlet gets hot during operation. Closely supervise any children and pets when in use.
- Do not route power cord underneath the heater or in front of air inlet or outlet.
- Do not insert anything into the ventilation grill!
- ALWAYS disconnect the product form the mains supply when it is not in use.
- DO NOT use this device if the cord or the plug is damaged, or the appliance is broken.
- Do not attempt to repair this appliance yourself. Only authorized and qualified personnel may repair this device. Never disassemble this device.
- Fixed power cable may only be replaced in an authorized service point.
- This product is only suitable for well insulated spaces or occasional use.
- Clean this device in accordance to instructions listed in ,,Cleaning” section. Keep the fan heater clean. Do not allow any objects to enter any ventilation or exhaust opening as this may cause electric shock, or fire or damage to the heater.
ASSEMBLING
To fit the hose follow the base instructions:
- Connect the base elements with the appropriate snaps.
- Put the power cord through the opening in the base.
- Put the base on the bottom of the device.
- Secure the base with the mounting screws included in the kit.
OPERATION
- Place the device on flat, stable surface. Make sure there is enough space around the device to allow free circulation (at least one meter from walls or furniture) and that air inlet and outlet are not blocked.
- Before connecting the device to power supply, make sure the device is switched off power switch is on “O” position.
- . Switch power switch to “I” position. The device will make sound signal, screen will show ambient temperature and will stay in standby mode.
- To turn on the device, press the power button. The device will start with fan mode on.
- The heating function can be activated in several ways:
- Press the heat power button. The first press will turn on the low heating power (1000 W), the second press will turn on the high heating power (2000 W), the third press will turn off the heating mode, leaving the fan mode on.
- Press the temperature adjustment button the heating mode will start and the set temperature indicator will flash. Pressing the temperature adjustment button on the housing of the device again will increase the preset heating temperature (remote control allows you to adjust the temperature up and down; pressing the temperature button on the remote disables this mode). The set temperature range is 18 45 ° C. In this mode, the device will maintain the set temperature by alternating operation of the fan and the heating element. If the set temperature is higher than the ambient temperature by 1 2°C, the device will work with low heating power. If the set temperature is at least 3°C higher than the ambient temperature, the device will work with high heating power.
- The device has a built-in timer that will activate the standby mode after the time set by the user (1-8 hours). To set the timer, press the timer button until the desired time period is displayed
- Press the rotation button to turn on automatic rotation. Press it again to stop rotation.
- To turn on the visual imitation of the fireplace located at the bottom of the front of the device, press the imitation of fireplace button. Press it again to turn off.
- If the device tilts or is raised during operation, the protection will automatically turn off the device.
Note:
- For optimum benefit, close windows and doors
- Do not cover the ventilation holes as this will cause overheating and will activate the cut out
- Before switching off, let the device work for 5-10 seconds in fan mode.
CLEANING
Clean your device regularly.
- Before cleaning unplug the device from power mains socket.
- Allow the device to cool completely.
- Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean the fan.
- Ensure the intake grill is free from dust, as this will reduce the airflow. Accumulated dust can be removed with soft cloth or vacuum cleaner
- Allow surface to fully dry before using the device again.
SPECIFICATION
BASIC FEATURES
Touchpad Overheat protection Automatic switch off in case of overturning LED
display Ceramic heating element PTC Automatic rotation 90° Remote control
Decorative imitation of a bonfire 3 work modes (cool air / warm air / hot air)
Range of set temperature 18 45°C
TECHNICAL DATA
Sound power level: 50 dB Power cable length: 150 cm Remote control power
supply: 3V CR2025 battery 2 heating levels: 1000 W / 2000 W Rated power: 2000
W Power input: AC 220 – 240 V; 50 – 60 Hz
PHYSICAL PARAMETERS
Dimensions: 850x140x140 mm (without base) Base diameter: 300 mm Weight: 3,3 kg
IN SET
Remote control, user’s manual
English Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature,
indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwoliska 1, 08-400
Mitne.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>