WATERWARE THE9W54E99 135L Electric Hot Water Cylinders User Manual
- June 5, 2024
- WATERWARE
Table of Contents
WATERWARE THE9W54E99 135L Electric Hot Water Cylinders
INSTALLATION
Protank hot water cylinders are designed for indoor installation mains pressure domestic hot water systems.
DESIGNED SMART IN NEW ZEALAND – BUILT TOUGH IN BRITAIN.
Protank has been developed to meet the needs of those homeowners wanting a
high-capacity, high pressure hot water system that is going to last.
The internal tank and fittings are crafted from the highest possible spec
‘Duplex 2304 stainless steel and performance matched to Calefti’s latest high
flow valve set.
MODEL RANGE
Models with valve set include:
- Protank hot water cylinder
- Calef’s direct mount mono-block combo set
- Caleffi TPR valve
- Heatrod element (s) and thermostat
Models without valve set include:
- Protank hot water cylinder
- Caleffi TPR valve
- Heatrod element(s) and thermostat
CALEFFI DIRECT MOUNT COMBO SET
20mm COMBo2015PRO (135L and 185L models)
Protanks are available with or without Caleffi’s direct mount mono-block combo
set which can save up to 50% in installation time when compared to installing
a traditional hot water cylinder with 3rd party valves and components. It
connects to the cold and hot connections via Caleffi’s full-proof o-ring
sealed union connections.
The Caleffi direct mount combo sets include every primary valve required to complete an installation:
- 1x mono-block tempering inlet valve and isolators
- 1x adjustable pressure limiting valve with strainer
- 1x cold water expansion valve
- 1x ball valve
RECIRCULATING SYSTEMS
The mono-block manifold has a blanking cap which when removed acts as a return
port for a recirculating ring main. Contact us tor ring main set up or design
advice.
DIRECT MOUNTING OF THE TEMPERING VALVE
Notwithstanding acceptable methods detailed in G12, the manufacturer Caleffi
have specifically engineered this tempering control valve to directly mount
onto the hot water cylinder with no minimum pipe length isolation requirement
as an alternative method ot achieving compliance.
SPECIFICATIONS
General Specification
- Manufactured by Whitewolf
- Country of origin UK
- Pressure Ratings
- TPR Setting 700 kPa
- Cold water expansion setting 600 kPa
- Maximum supply setting 500 kPa
- Factory supply set point 300 kPa
Electrical
- Cable / Sheath size 3×1.5mm / 8mm
- Terminals Screw type, 4 mm
- Thermostat supplier Herod
- Thermostat model SH314C-CAICAI-STROM
- Thermostat approval number EQ739-DAT9900155
- Thermostat set point range 30 ºC-70 ºC
- Thermostat factory set point 62 ºC
- Thermal cutout set point 90 ºC
- Thermal cutout reset Manual
- Heating element supplier Heatrod
- Heating element mount 1&3/4” Female threaded
- Heating element sheath material Titanium
- Heating element resistance 19.2 ohm
- Heating element power density 9.6 w/cm²
Shell Construction
- Shell type Single skin
- Shell material 2304 Duplex SS
- Thickness 1 mm
- Circumferential joint Tig butt weld
- Longitudinal joint Tig butt weld
Case Construction
- End material Polypropylene
- End thickness 2 mm
- Wall material Painted Galvanized steel
- Wall thickness 0.45 mm
- End joint Press fit
- Wall joint Lock form joint
Thermal Insulation
- Insulation specification EPC/IsoPMDI
- Wall thickness 50 mm
- Base thickness 10 mm
- Top thickness 50 mm
Technical Specification
PORT LAYOUT
135 and 185L Models
Model/135L/185L
- Inlet/Outlet height 1380mm 1800mm
- TPR Valve 1150mm 1570mm
- Element 260mm 260mm
- CWE Valve 215mm 215mm
- Inlet/Outlet centres 110mm 110mm
PROTANK 20-YEAR LIMITED WARRANTY
All terms of the warranty, subject to the conditions below, are effective from the date of installation if proof of installation date can be provided. Where the date of installation is not known or cannot be proven, the warranty will commence one month after proof of purchase date.
Single Residential Domestic Warranty
A single residential domestic installation is defined as an installation where
the hot water cylinder with a factory set thermostat delivers hot water to a
privately owned single-family residential dwelling which is not used for
commercial purposes.
Protank Excluding Valves and Element
5 YEARS FREE PARTS and LABOUR costs to replace or repair the cylinder if it
fails due to a manufacturing defect.
Followed by; 5 YEARS FREE PARTS ONLY costs (excluding labour) to replace
or repair the cylinder if it fails due to a manufacturing defect.
Followed by; 10 YEARS *PRO-RATA PARTS ONLY reducing costs (excluding
labour) according to the below formula, to replace or repair the cylinder if
it fails due to a manufacturing defect.
Pro-Rata Formula = Original purchase price x remaining warranty in years ÷
total warranty period of the cylinder.
Caleffi Valves (excluding any 3rd party valves)
5 YEARS FREE PARTS and LABOUR costs to replace or repair any valve that fails
due to a manufacturing defect.
Protank Element Only;
12 MONTHS FREE PARTS and LABOUR costs to replace or repair the element if it
fails due to a manufacturing defect.
Commercial Applications Warranty
Any installation not considered to be a single residential domestic type.
Protank and Caleffi Valves Excluding Element
5 YEARS FREE PARTS and LABOUR costs to replace or repair the cylinder or
valves if failure is due to a manufacturing defect.
Protank Element Only;
12 MONTHS FREE PARTS and LABOUR costs to replace or repair the element if it
fails due to a manufacturing defect.
Refer to full terms, conditions and exclusions in the installation/owner manual
- waterware.co.nz
- [email protected]
- ph +64 9 273 9191