PHILIPS 8.9T8-MAS-48-840-IF16-P MasterClass InstantFit T8 LED Tubes Owner’s Manual

: June 1, 2024
: Philips

Table of Contents

Introduction
Product Data
Dimensional Drawing
Photometric Data
Lifetime
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILIPS 8.9T8-MAS-48-840-IF16-P MasterClass InstantFit T8 LED Tubes

PHILIPS 8.9T8-MAS-48-840-IF16-P MasterClass InstantFit T8 LED
Tubes

Introduction

8.9T8/MAS/48-840/IF16/P/DIM 10/1

The MasterClass InstantFit T8 lamps provide hassle-free installation with simple lamp-for-lamp replacements. They deliver what we promise, with at least 40% energy savings, flicker-free performance, and the life you would expect. Other lamps claim compatibility but only MasterClass InstantFit (UL Type A) has been proven to work with over 200 ballasts and drivers, delivering even light output, with proven energy savings and a long average lifetime. End users will be delighted being under these comfortable and high quality lamps with no visible flicker and optimized optics. Energy managers will enjoy these lamps too as they can count the savings delivered by our lamps. To enjoy more energy savings, the MasterClass InstantFit lamps can be paired with the Advance T LED drivers to create a Type C system. With available 70,000 hour life, 7-year limited warranty and a shatter-prevention polycarbonate lens, Philips MasterClass InstantFit TLED lamps deliver benefits for all.

Product Data

General Information			Beam Angle (Nom)	180 degree(s)
Cap-Base	G13 [Medium Bi-Pin Fluorescent]		Luminous Flux	1,600

MasterClass InstantFit (UL Type-A) T8

Operating and Electrical|
---|---
Line Frequency| 20K to 120K Hz
Input Frequency| 20K to 120K Hz
Power Consumption| 8.9 W
Lamp Current (Max)| 300 mA
Lamp Current (Min)| 90 mA
Wattage Equivalent| 32 W
Starting Time (Nom)| 0.5 s
Warm-up time to 60% light| 0.5 s
Power Factor (Fraction)| 0.9
Voltage (Nom)| 120-277,347 V
UL Type| UL Type A
|
Temperature|
Ambient temperature range| -20 °C to 45 °C
T-Case Maximum (Nom)| 40 °C
|
Controls and Dimming|
Dimmable| Only with specific dimmers
|
Mechanical and Housing|
Bulb Finish| Frosted
Bulb Material| Plastic
Product Length| 1,200 mm
---|---
Bulb Shape| T8
|
Approval and Application|
Energy Saving Product| Yes
Approval Marks| RoHS compliance UL certificate DLC
| compliance
Energy Consumption kWh/1000 h| – kWh
|
Application Conditions|
can it be used in closed luminaires| Yes
|
Product Data|
Order product name| 8.9T8/MAS/48-840/IF16/P/DIM 10/1
Full product name| 8.9T8/MAS/48-840/IF16/P/DIM 10/1
Order code| 565606
Material Nr. (12NC)| 929003025504
Numerator – Quantity Per Pack| 1
EAN/UPC – Product/Case| 046677565602
Numerator – Packs per outer box| 10
EAN/UPC – Case| 50046677565607

Dimensional Drawing

Product	D1	D2	A1	A2	A3

8.9T8/MAS/48-840/
IF16/P/DIM 10/1| 25.7 mm| 26.3 mm| 1,198.1 mm| 1,205.2 mm| 1,212.3 mm

Dimensional Drawing

Photometric Data

General uniform lighting – 8.9T8/MAS/48-840/IF16/P/DIM 10/1

Spectral Power Distribution Colour – 8.9T8/MAS/48-840/IF16/P/DIM 10/1

Photometric Data

Light Distribution Diagram – 8.9T8/MAS/48-840/IF16/P/DIM 10/1

Photometric Data

Lifetime

Lumen Maintenance Diagram – 8.9T8/MAS/48-840/IF16/P/DIM 10/1

Lifetime

Life Expectancy Diagram – 8.9T8/MAS/48-840/IF16/P/DIM 10/1

Lifetime

Life Expectancy Diagram – 8.9T8/MAS/48-840/IF16/P/DIM 10/1

Lifetime

Life Expectancy Diagram – 8.9T8/MAS/48-840/IF16/P/DIM 10/1

Lifetime

Lumen Maintenance Diagram – 8.9T8/MAS/48-840/IF16/P/DIM 10/1

Lifetime

© 2023 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial oƒer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.