HANYOUNG NUX PEA Series Built In Power A Amplifier Instruction Manual

: September 4, 2024
: HANYOUNG NUX

Table of Contents

HANYOUNG NUX PEA Series Built In Power A Amplifier
Safety information
Specification
Suffix code
Indicator light state
Connection diagram
Dimension
How to install
Accessories
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HANYOUNG NUX PEA Series Built In Power A Amplifier

Thank you for purchasing Hanyoung Nux products. Please read the instruction manual carefully before using this product, and use the product correctly. Also, please keep this instruction manual where you can see it any time

Safety information

Please read the safety information carefully before use, and use the product correctly. The alerts declared in the manual are classified into Danger, Warning and Caution according to their importance

DANGER Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury
WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury
CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor injury or property damage

DANGER

The input/output terminals are subject to electric shock risk.
Never let the input/output terminals come in contact with your body or conductive substances.

WARNING

This product is not for outdoor use (it may shorten the product’s lifetime and cause electric shock)
Do not use this product in places with flammable or explosive gases (it does not have an explosion-proof structure, so there are fire or explosion risks)
Do not use the product in places where vibrations or shocks exceed the reference values (it has a double insulation structure, but the components may be damaged)

CAUTION

Applicable Pollution degree 3 of intended environment.
Never use it on AC power.
Be careful of wiring. It may cause an explosion, fire, or machine breakdown.
Do not use the product in a state where the product body or cable is crashed.
Do not disassemble, repair or modify the product.
When the lens of the photo sensor is contaminated by foreign substances, use a dry piece of cloth and wipe off the substance lightly. Never use thinner or organic solvents.
Separate high voltage cable and power line from the sensor wire. Be cautious since using the same pipe during wiring could cause malfunction.
If the cable needs to be extended, use over 0.3 ㎟ and be cautious because of a possible sudden voltage drop.
When using the sensor under lights with high frequency, such as fluorescent lamps or mercury lamps, block it with a light shading plate and prevent the lens from facing the light directly.
If multiple through-beam type photoelectric sensors are installed close together, malfunction may happen due to the
mutual interference
When using the Switching Power Supply as a power source, ground the Frame Ground (F.G.) terminal and be sure to connect the noise-canceling condenser between OV and F.G. terminals
The power supply should be insulated and limited voltage/current or Class 2, SELV power